Steel holder

STANKO

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Rsdpfsvkuauex Abdjn Good general condition. For further information see data sheets.

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min Rodpfx Abovuullodjn impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m SPECIAL OFFER Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 1977, Table diameter: 800mm Max. diameter: 1000mm Redpfx Abjyghxgsdjn Max. stroke: 200mm Max. module: 12

Condition: excellent (used), Year of construction: 1976, Max. diameter: 560mm Working length: 3550mm Rodpfx Absyghvljdon Max. workpiece length: 4000mm

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Rodpfx Abjt U Ivtjdon

Condition: ready for operation (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Redpfjyghprox Abden Turning length: 2800mm Workpiece weight: 5000kg

Condition: used, Year of construction: 1988, functionality: fully functional, 1 Lead and Screw-Cutting Lathe Manufacturer: Stanko Model: 1M-63b Rsdjyf Dyqepfx Abdjn Year of manufacture: 1988 Swing diameter over bed: 700 mm Swing diameter over carriage: 350 mm Turning length: 3000 mm Centre height measured in bed: 320 mm Spindle bore: 70 mm Spindle speed max.: 10 - 1250 rpm / 24 steps Cross feed: 0.0256 ... 0.378 mm/rev Longitudinal feeds: 0.064...1.025 mm/rev Tailstock quill travel: 240 mm Tailstock taper: MT5 Total power requirement: 14.0 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 5.1 x 1.8 x 1.6 m Travels of carriage: Longitudinal travel = 3000 mm Cross travel = 400 mm Tool post travel = 220 mm Coolant system with pump Accessories: 2 steady rests 3-jaw chuck

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable Rsdog Ip Efepfx Abdsn

Condition: used, total width: 1,600 mm, total length: 2,500 mm, total height: 1,700 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No Rjdpswnicwefx Abdjn - Table width: 450mm - Travel Z: 300mm - Max. stroke: 700mm - Model: Horizontal - Travel Y: 1200mm - Table length: 700mm - Travel X: 800mm - Throat depth: 450mm - Model: Hydraulic - Control: Conventional - Motor power: 7.5kW - Transport dimensions: 2500mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1992, Swing diameter over bed: 1000 mm Rodpfx Ajyfnfwebden Spindle diameter: 128 mm Turning length: 8000 mm Total power requirement: 22 kW Machine weight approx.: 20 t

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: Redpfx Absvtn H Todon - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: good (used), Year of construction: 1993, Swing diameter over bed: 1000 mm Spindle bore: 128 mm Turning length: 5000 mm Total power requirement: 22 kW Machine weight approx.: 16 t Space requirement approx.: 7.8 x 2.3 x 1.8 m Redpfxsyfnd To Abdjn

Condition: used, Year of construction: 1979, grinding diameter 630 mm grinding length 4000 mm centre height / mm weight of the machine ca. 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine Redpfsvm Dzasx Abdjn ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, ensuring top-notch results. With its reliable design and precise performance, this cylindrical grinding machine is ideal for processing a variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies striving for the highest quality standards in metal machining. Trust in the proven technology of STANKO to optimize your manufacturing processes and achieve superior results. Invest in the future of your production with the STANKO Cylindrical Grinding Machine 3M194 - the perfect combination of performance, precision, and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your manufacturing requirements.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Redpfx Abowudhujdon Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1980, sheet width 2050 mm plate thickness 8 mm Redpokxhrhsfx Abden electrical . weight of the machine ca. 6,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++