Center Lathe

STANKO 1 K 62

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Nledpfsxxz E Njx Abksc Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Condition: excellent (used), functionality: fully functional, Surface planer HA 4 Planing width 450 mm Total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. chip thickness 15 mm Knife shaft rotation 4800 rpm Motor power 4 hp Nsdpfx Aboinkfnskslc Weight 660 kg 3-knife shaft Transport available for an extra charge! Due to the age of the used machine, the warranty is excluded when selling to commercial customers.

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 Nlsdpfx Abolf Iqnskjc - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Nlodpjuddimefx Abkec Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Nedpfxsxtu Ero Abkelc Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm Nedpfxoyh Ndws Abkelc spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Njdpfxelhwr Re Abkjlc Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories! Nlodpot Hwucofx Abkjc

Condition: good (used), Magnetic table 455 x 170 mm digital display Nledpfx Abotu Il Tjkec water tank Honing device Wet sanding device

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey Nsdpfsiay Sfox Abkjlc The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *