Used Kasto Hbs 210 240 for sale (119)

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds Kledpfx Aouqgbtealep - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min Kodpsxz Hhhofx Aalolp total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Year of construction: 1990, Cutting capacity at 90°: round: 210 mm, square: 210 mm, flat: 240 x 190 mm. Cutting capacity at 45°: round: 150 mm, square: 150 x 100 mm, flat: 150 x 100 mm. Saw blade dimensions: 400 x 30 x 1.5 mm. 2 stroke speeds via pole-changing motor: 16 and 32 m/min. Drive motor: 380 V, 0.9 kW. Weight: 170 kg. Required space: 1190 x 480 x 1300 mm. Ksdpfx Aajymb Afslolp

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm Klsdpfxjifu Ayo Aalsp sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, Year of construction: 1987, Hydr. hacksaw, metal saw, lifting saw KASTO Unfortunately there is no type plate available, the data is from a comparable saw Klodjq R Riijpfx Aalsp Type PSB WBS 210 / 230 Year of manufacture in the 80s Sawing area - round Ø 250 mm Sawing area - square 225 x 225 mm Sawing area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - only for 90° cuts, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt speeds - Hydraulic saw arm feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering saw bow - manually height-adjustable material support table with mm scale via handwheel - Manual material clamping - Coolant device in the machine base Space requirement L x W x H 1500 x 700 x 1550 mm Weight approx. 590 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min Ksdou H Acyspfx Aalolp - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: used, Year of construction: 1998, cutting diameter / mm saw band length / mm Kljdpeyvkv Uefx Aaljp cutting width / mm KASTO SBA 280 AU-CC band saw Cutting capacity: 5 kW Machine weight: 1,750 kg Year of manufacture: 1998 Note: The display is not functioning properly and dims during operation.

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Klsdexpymaopfx Aalep Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Kjdpev Sfp Asfx Aalelp Weight: 9 ton (only machine)

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, tilt adjustment saw blade: 45 °, cutting speed: 100 mm/min, section length (min.): 15 mm, workpiece diameter (max.): 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Maximum workpiece dimensions at 90° miter angle: Round: 280 mm Square: 280 x 280 mm and 360 x 180 mm Maximum workpiece dimensions at 45° miter angle: Round: 180 mm Square: 180 x 180 mm and 260 x 180 mm Minimum sawable diameter: 6 mm Minimum sawable length at 90° cut: 15 mm Cutting speed: 19 - 100 mm/min (continuously adjustable) Saw band dimensions: 3,830 x 25 x 0.9 mm Kedpfxeyr N Nqo Aaljlp MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 10 A Connected load: 2 kW Dimensions & weight Dimensions (L x W x H): 2,400 x 1,800 x 1,500 mm Machine weight: 500 kg External reference: Lot 79

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Kjdpfx Aaoupvrxelslp Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Ksdox Rpdyjpfx Aaljlp Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: used, cutting diameter 260 mm band length 450 x 40 x 2 mm capacity 60 degrees: square 240 mm 260 x 180 total power requirement 2,0/2,6 kW weight of the machine ca. 1,4 t dimensions 2,1 x 1,7 x 1,0 m Kedpoyt R Ikefx Aalelp

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation Kjdpfx Ajxb Eduoaljlp

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm Kjdoxb Edzjpfx Aalelp dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: ready for operation (used), Year of construction: 1998, cutting width (max.): 260 mm, overall weight: 1,300 kg, capacity 260 mm, double hydraulic vices Kledpfxsypv Smj Aalsp

Condition: excellent (used), Year of construction: 2004, Manufacturer: KASTO Model: KASTOtec A4 Year of manufacture: 2004 Specification HIGH-PERFORMANCE BANDSAW Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0–600 mm Kledsygl Thspfx Aalep Multi-feed range: 0–9999 mm Min. cutting length: 35 mm Max. cutting speed: 12–120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW 4 m material feed conveyor 4–5 new saw bands included in delivery.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Kodpfx Aeyi Unasaljlp Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: like new (used), Year of construction: 2017, 1 x Semi-Automatic Bandsaw Kasto Klodpfoxy Si Ijx Aaljp micut P 2.6 Year of manufacture: 2017 with roller conveyor equipped with integrated coolant pump. The machine originates from specialty machine engineering and is in very good condition. Technical data: Cutting capacity: round stock 260 mm, flat stock: 310 x 260 mm at 90° Cutting capacity: round stock 230 mm, flat stock: 200 x 260 mm at 45° Cutting capacity: round stock 150 mm, flat stock: 140 x 160 mm at 60° Cutting capacity: round stock 230 mm, flat stock: 200 x 260 mm at -45° Cutting speed: 20 – 110 m/min (stepless adjustment) Saw blade dimensions: 3,180 x 27 x 0.9 mm Accessories: 3 x roller conveyors with 250 kg load capacity/m Rear dimensions: length: 2.3 + 1.1 m, width: 0.39 m Front dimensions: length: 2.6 m, width: 0.39 m with length stop Machine feet for roller conveyors and machine Wiring diagram The saw can be inspected under power.

Condition: used, 1 piece KASTO hacksaw Color: as shown, according to the photos and inspection Condition: used Storage location: Building 2 / Hall 1 Payment method: Advance payment by bank transfer Kjdpjytqbqefx Aalslp Shipping: Pickup only from location in Regensburg

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ksdpfx Ajyqr Utsaljlp If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2002, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, control type: NC control, actuation type: electric, overall weight: 2,100 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Offered here is a bandsaw from the manufacturer Kasto. The saw is in good condition and can be inspected and tested under power at our facility. Kodpfeyrpkuex Aalolp For technical data, please refer to the pictures.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 400 mm, saw band length: 5,700 mm, stepless cutting speed hydraulic material clamping infeed automat chip conveyor coolant device roll conveyor Technische Daten: Schnittbereich rund / cutting range round 400 mm Kledpfx Aaetzkdgolsp Schnittbereich vierkant /cutting range square 400x400 mm Mehrfachvorschub / multiple infeed 20000 mm Schnittgeschwindigkeit / cutting speed 20-110 m/min. Sägebandlänge / dimensions of the saw band 5700x41x1,3 mm Antriebsleistung / drive capacity 8 kW Gewicht der Maschine ca. / weight 2700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, functionality: fully functional, Metal bandsaw, blade length 430 mm Cutting diameter 210 mm Saw blade length 400 mm Cutting range at 90 degrees: square 190 mm Cutting range at 90 degrees: flat 240 x 190 mm Cutting speed 16/32 m/min Total power requirement 1.1 kW Machine weight approx. 180 kg Dimensions (L x W x H) 1.2 x 0.8 x 0.808 m Kedpfxoyr Aqns Aaljlp

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Kljdpfxjv Nq Rme Aalep Material feed Material discharge Chip conveyor