Used Kasto Hba 420 Au for sale (113)

Condition: used, Year of construction: 1990, cutting diameter 420 mm saw band length 6300 x 41 x 1,3 mm Fodpoz Ek A Ijfx Aikspp cutting speed 10 - 130 m/min saw band length 4870 x 27 x 0,9 mm total power requirement 9,0 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,5 x 2,35 x 2,1 m Fully automatic band saw - Control Minipos 807 - with chip conveyor

Condition: not inspected (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. Fpodpfx Asvf N Sujikop 400x200x300 cm Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Year of construction: 1989, condition: good (used), Kasto fully automatic band saw, type HB 420 AU. Sawing capacity for round stock: 420 mm Sawing capacity for square stock: 420 x 420 mm Maximum clamping opening: 480 mm Saw blade: 6300 x 41 x 1.3 mm Variable speed: 20-130 rpm Chip conveyor Motor power: 8 kW Weight: 3360 kg Machine in good working condition. Fsdpfx Aoh Huazeikspp

Year of construction: 1995, condition: used, Offered for sale is an automatic horizontal bandsaw with roller conveyor. Control system: Electronic machine control system with display, keyboard and control buttons. Equipped with hydraulic workpiece clamping, material feed system, roller conveyor, safety guards and additional bandsaw blades. Inspection possible by arrangement. Fsdpfx Aijz N Haxokopp

Condition: used, Year of construction: 1996, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: HBA 360 AU Year of manufacture: 1996 Machine number: 6016 109 181 Weight: approx. 2,600 kg Electrical connection: 400 V Frequency: 50 Hz Power supply: 3~ (three-phase current) Connected load: 10.0 kW Rated current: 35.0 A Maximum cutting range: approx. 360 × 360 mm Fedpfx Aozu A Tyoikepp Maximum round cut: approx. 360 mm Saw band length: approx. 5,334 mm Saw band dimensions: approx. 41 × 1.30 mm (depending on version) Cutting speed: approx. 14–102 m/min Automatic material feed: approx. 600 mm stroke Saw band drive: approx. 5.5–6.0 kW Version: automatic high-performance band saw machine Suitable for sawing round, square, and profile material CE marking present Note: The technical data listed above has been compiled based on the nameplate of the specific machine and available information regarding the KASTO HBA 360 AU. Individual technical specifications may vary depending on the year of manufacture, serial number, and equipment configuration. SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, Year of construction: 1997, cutting diameter 520 mm saw band length 7239 mm Fpodexfwd Iepfx Aiksp cutting range square 520 x 520 mm feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm weight of the machine ca. 4,2 t dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm Fpjdjt Tqlbspfx Aikop dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 22 kW (29.91 HP), Item No. 5.4-783 1 used automatic band saw Kasto KASTO HBA A10x12, year of manufacture 2004 Roller conveyor Chip conveyor Coolant system Technical data: Cutting range (round) 300-1260 mm Cutting range (square) 1060x1060 mm Cutting speed (variable) 12-90 m/min Fpsdez Ehryopfx Aikjp Saw band dimensions 11430x80x1.6 mm Total drive power 20 kW Machine weight (approx.) 15500 kg Technical data, accessories and machine description are non-binding.

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Fpsdpfx Aswm Rm Ioikop Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,920 kg, controller model: Siemens Simatic HMI, cutting diameter: 320 mm, cutting speed: 130,000 mm/min, saw band length: 6,300 mm, The machine was overhauled by Kasto in 2016! TECHNICAL DETAILS Cutting diameter: 320 mm Saw band length: 6,300 mm Cutting range: 420 x 320 mm Cutting speed: 20 – 130 m/min Material support height: 950 mm MACHINE DETAILS Control: Siemens Simatic HMI Total power requirement: 15 kW Dimensions & Weight Space requirement: approx. 6.35 x 6.76 x 2.41 m Machine weight: approx. 2,920 kg Pneumatic connection: 6 bar Coolant: 75 l Pump capacity: 40 l/min EQUIPMENT Infinitely variable feed rate Fpjdpeywhdfefx Aiksp Roller conveyor Chip conveyor Technical documentation The machine is supplied without robot and loading system. The machine must be reprogrammed by the customer for stand-alone operation.

Condition: used, Year of construction: 2014, KASTOverto A 2 Cutting range: Cutting range 90° round 260 mm Cutting range 90° flat (W x H) 320 x 260 mm Cutting range 90° square 260 x 260 mm Shortest section length 6 mm Smallest diameter to be sawn 10 mm Fpsdo Ai Enfepfx Aikop Shortest remaining piece length in single cut 15 mm Shortest remaining piece length in automatic operation 40 mm

Condition: used, Year of construction: 2009, machine/vehicle number: 3122 102 024, functionality: fully functional, operating hours: 24,000 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: DC, cutting height (max.): 150 mm, cutting width (max.): 150 mm, control type: NC control, pivoting range: 60 °, actuation type: electric, total height: 1,880 mm, total length: 3,270 mm, total width: 1,200 mm, overall weight: 2,500 kg, table height: 1,050 mm, Equipment: CE marking, documentation/manual, lighting, Description Fpjdpfs Agv Thjx Aikjp This KASTO KASTOflex F metal cutting circular saw was manufactured in 2009. It weighs 2500 kg, operates on 400 V, and features automatic feed, a scrap collection bin, and a coolant system. It can perform straight and miter cuts up to +/- 60°. The machine was in operation until two weeks ago (October 15, 2026), is fully functional, and is available for immediate pickup. Documentation is available.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Fpsdoyi Unajpfx Aikop Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: used, Year of construction: 2018, capacity 90 degrees: round 430 mm capacity 90 degrees: square 340x340 mm capacity 90 degrees: flat 460x335 mm Cutting area at 45 degrees right: round 320 mm Cutting range at 45 degrees right: square 320x320 mm Cutting range at 45 degrees right: flat 320x320 mm capacity 60 degrees: round 240 mm capacity 60 degrees: square 220x220 mm capacity 60 degrees: flat 210x230 mm min. dia. Ø 6 mm table height 700 mm dimensions of saw-band 5090x34x1,1 mm cutting speed 32/64 m/min total power requirement 3,5 kW weight of the machine ca. 1.050 kg Fpedpj Agpgqjfx Aiksp dimensions of the machine ca. 2700x1250x1400 mm

Condition: used, Year of construction: 2014, saw blade diameter 315 x 2,5 x 32 mm cutting diameter 100 mm Fjdpfx Aj Afarxeikspp cutting speed 33/66 m/min height of material-table 900 mm total power requirement 1,8 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,05 x 0,50 x 1,80 m

Condition: not inspected (used), Year of construction: 1999, cutting width (max.): 360 mm, overall weight: 2,500 kg, cutting capacity, maximum diameter 360 mm roller tables chip conveyor Fjdpfezbrnbsx Aikspp weight 2500 kg

Year of construction: 1997, condition: used, Cutting speed copper/aluminum: 80m/min, structural steel/steel pipes: 65-85m/min, C45/comparable steels: 55-80m/min, C60/comparable steels: 55-65m/min, 34CrMo4: 40-60m/min, 42CrMo4: 40-55m/min, 10CrMo9-10: 30-50m/min, high-alloy steels: approx. 20-40m/min, connected load: 5kW, rated current: 16A, weight: 1.75t, an on-site inspection is possible. Fpode Adt Epopfx Aikop

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Fodewk D Efepfx Aikopp Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, Year of construction: 1991, Automatic metal sawing machine with hydraulic workpiece clamping, automatic material feed, and control panel for series processing of metal profiles and solid materials. Manufacturer: KASTO Machine type: Fully automatic sawing machine Year of manufacture: 1991 Fpodpe Aiccaofx Aikep Operating mode: Automatic Material feed: Automatic Workpiece clamping: Hydraulic Clamping device: Vise I and Vise II Feed: Adjustable rapid feed Operation: Central control panel Cutting length setting: Via preset counter Coolant system: Available

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Kasto Kastodisc M10 Vertical Circular Saw, Metal Cutting Saw Manufacturer: Kasto Fpsdsztyldjpfx Aikep Type: Kastodisc M10 Metal Cutting Saw Year of Manufacture: 2009 Condition: Used, very good, ready for demonstration Scope of Delivery: - Documentation - Coolant system - 1 x Saw blade (used) - Material stop, 1000 mm

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Fedpfx Aijyqr Utokepp than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, Saw blade 315 x 2.5 x 32 mm Motor power 1.25 / 1.85 kW 2 cutting speeds 33 + 66 m/min Dimensions, L x W x H approx. 450 x 800 x 1700 mm Weight approx. 270 kg Fpjdpfxj Afx R Tj Aikjp Mitre saw 45°, coolant system

Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4" Fully automatic miter bandsaw machine – KASTO Type/Model: KASTOpos GA 4 Condition: Used, partially overhauled in 2026 Year of manufacture: 2002 Work performed / partial overhaul • Machine thoroughly cleaned and technically inspected • Machine housing and machine body repainted • Mechanical, hydraulic, and electrical functions checked • Saw blade, material clamping device, and feed system checked and adjusted • Band guide and all machine movements checked for proper function • Safety and control elements checked • Necessary repair work carried out as part of the partial overhaul • Final complete functional test performed • Roller conveyor disassembled, cleaned, technically inspected, and repainted • Rollers and bearing points of the roller conveyor checked • Roller conveyor then reassembled and functionally tested The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul. Technical data Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm Cutting speed, stepless: 16 to 160 m/min, frequency-controlled Fpjdpoz Sqlkefx Aikop Material feed (single stroke): max. 750 mm Shortest remaining piece length: Automatic: approx. 100 mm Single cut: approx. 10-30 mm Saw motor power: approx. 4.4 kW Total connected load: approx. 7.4 kW (380 V / 50 Hz) Machine weight: approx. 3,000 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Fpodpfxet Hwrno Aikop Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 6459103320, functionality: fully functional, Technical Data KASTOtwin A 2 Dimensions of standard machine Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Total weight approx. 1,700 kg Total drive power: 5.0 kW Cutting range in mm approx.: Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Single feed length max. 750 mm Multiple feed: 9,999 mm Shortest cut length: 6 mm Smallest diameter to be cut: 10 mm Minimum remnant per single cut: 15 mm Shortest remnant length in automatic operation: 100 mm Fpedpotiwz Ijfx Aikop Cutting speed, infinitely variable: 20 - 100 m/min Saw band dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Cutting feed: infinitely adjustable Material feed: ball screw spindle Band tension: hydraulic