Used Stylus Grinding Machine for sale (65,014)

Condition: good (used), Year of construction: 1988, Lid SOE graver-grinding machine year 1988 . Accessories : Collets , Good working condition. Dwjdpfjuqv Nasx Abzja

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection Dedstqdqgjpfx Abzowa z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release Dwjdsqctp Sepfx Abzea to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -

Condition: reconditioned (used), Cutter Grinder Make: harich (Deckel) Model: SSM (S0E) Refurbished with CE certification with warranty Accessories: - Machine stand - Integrated dust extraction Dsdpfx Abox A U Rgszswa - Grinding wheel with flange - Dressing tool - Operating manual incl. new machine electrics according to current safety regulations incl. new circuit diagram incl. CE documentation incl. CE labelling incl. CE Declaration of Conformity

Condition: reconditioned (used), Year of construction: 1986, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Dwedpeqctniefx Abzea Mach. no.: 86-5751 with guarantee Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate Used as seen The machine is technically compliant with the state of the art at the time of manufacture.

Condition: reconditioned (used), Year of construction: 1988, Cutter Grinder Manufacturer: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1988 - overhauled, newly painted RAL7012 basalt grey, RAL 7035 light grey Machine No.: 3018 Warranty: Dedpfx Aexxyt Sjbzewa 12 months in single-shift operation from delivery. For machines located outside our North Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Machine stand - Grinding wheel with flange - Operating manual including new electrical system On/off switch in new housing with undervoltage release coil to provide restart protection (e.g. in the event of power failure or unplugging) Used, sold as seen The machine is technically in accordance with the status of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Dwedpslxpfmsfx Abzja Used as seen The machine is technically corresponding to the state of the year it was built.

Year of construction: 1989, condition: good (used), SOE reamer grinding machine with projection measuring device. Accessories: collets, various grinding wheels. In good, operational condition. Dsdpfxeg Tmdme Abzewa

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased grinding diameter and extended, hydraulic cross travel! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau and commissioned in 1996. Dwjdpfjzqcvtox Abzoa TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Grinding diameter with workpiece protection max.: 800 mm Grinding diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of the internal grinding attachment on the table: max. 545 mm Cross travel of the workpiece spindle stock: max. 650 mm Swiveling of the workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Cross travel: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixing devices or machine feet Various grinding wheels Diamond dressing tool Large grinding plate Internal and surface grinding attachment Halogen machine lamp Machine documentation

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 163190, grinding length: 600 mm, grinding width: 300 mm, workpiece weight (max.): 270 kg, grinding wheel diameter: 350 mm, distance table to spindle center: 565 mm, Like-new horizontal surface grinding machine with few operating hours! TECHNICAL DETAILS Grinding area Grinding length: 600 mm Grinding width: 300 mm Work table and workpiece load Table dimensions: 300 mm × 630 mm Maximum workpiece weight: 270 kg Distance spindle axis – table surface: 565 mm Travel distances and feeds Travel distance X-axis: 765 mm Travel distance Y-axis: 340 mm Scale ring graduation Y-axis: 0.02 mm Scale ring graduation Z-axis: 0.005 mm Automatic transverse feed Z-axis: 0.1–8 mm Feeds and rapid traverses Hydraulic feed X-axis: 7–23 m/min Rapid traverse Y-axis: 990 mm/min Rapid traverse Z-axis: 460 mm/min Grinding wheel Grinding wheel dimensions: 350 mm × 40 mm × 127 mm MACHINE DETAILS Control type: Conventional 2-axis position indicator: KNUTH Xpos 3.1 Motor power grinding spindle: 5.5 kW Total power requirement: 7 kW Dimensions & Weight Dsdpfx Aezqcvgsbzowa Machine dimensions: 2,800 mm × 2,200 mm × 1,890 mm Machine weight: approx. 2.7 t EQUIPMENT 2-axis position indicator KNUTH Xpos 3.1 Grinding wheel Grinding wheel flange Balancing arbour Balancing stand Halogen work light Magnetic chuck 600 mm × 300 mm Adjustment screws Operating tool Automatic transverse and longitudinal feed Hydraulic table longitudinal movement Double V-guides for the longitudinal movement Combined V- and flat guides for the transverse movement Hardened and ground table guide rails with PTFE counter coating Grinding spindle with maintenance-free, preloaded precision angular ball bearings External hydraulic unit Automatic central lubrication

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FPS-20-RS, Schiatti Angelo FPS 20 RS 2015 Excellent condition 10 spindle glass edging machine including cerium wheel Dedpfxozrx Ino Abzewa Can dismantle and load for buyer

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, Dwodpfotudfdox Abzsa maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Dwodpfxowugh Do Abzea Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Dsdpszrt Ipjfx Abzewa Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Dwjdpfx Abjnzib Eszoa Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, functionality: fully functional, Topking X-25 CNC Cylindrical Grinding Machine Topking “The X-25 CNC cylindrical grinding machine is the perfect answer for UK manufacturers facing space constraints,” explains Simon Rood. “Unlike traditional T-type base designs, the X-Series utilises a revolutionary cross-slide structure. This design allows the X-25 to reduce floor space requirements by over 30% while significantly enhancing stability. It is a superior choice when space is limited, making it ideal for busy production environments where every square metre counts.” Machine overview INTRODUCTION Compact CNC cylindrical grinding machine with an impressive capacity. The X series CNC cylindrical grinding machine integrates advanced design and innovative features, offering efficient, precise, and flexible machining solutions. This grinder can meet various processing needs and ensure high-quality results for small or large components. The X-axis and Z-axis of the X-series CNC cylindrical grinding machine adopt a cross-slide design, effectively reducing the footprint and axial travel, thereby saving production space. The high-rigidity machine body and the heavy-duty spindle and tailstock significantly increase the component load capacity. The high rigidity machine body ensures stability during grinding, providing high-quality machining results. The operating system is equipped with a high-performance CNC control system and a built-in graphical user interface (GUI), making setup easy and enabling users to operate with ease. The grinding applications are extensive, offering customers the most suitable machining solutions. Specification Swing (Max) 270mm Distance between centres 200mm Dsdpfxoubbqie Abzowa Grinding Diameter (Max) 250mm Weight between centres (Max) 5kg CNC Control System FANUC or Mitsubishi CNC Controls

Condition: new, DAWN DN Series (Single Spindle) Dawn Machinery Machine overview Suitable for grinding inside and outside diameters as well as the end surface of heavy or non circular work pieces. Heavier work pieces can be more easily loaded to the machine by overhead hoist Fully enclosed covers and oil mist reclaiming device prevent leakage of grinding oil and mist. Machine options Model DN-500 Specification Model DN-500 Grinding Diameter (Max) 610mm ø Swing (Max) 610mm ø Max work height 400mm Dodpfjubbp Sox Abzowa Motor Power 18/23kW CNC Control System SIEMENS 828D

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Dwjdjzlhlpepfx Abzsa Model: ZB 32 Capacity: 2.5-32mm With Cams

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Djdpjzlg Szofx Abzewa Model: 108

Condition: excellent (used), 36" Magnetic Table# Dwedpfx Abezh Ngmjzsa Model No 18

Condition: excellent (used), Specification - Work head Maximum work piece weight between centres 100kg Speed range30/450 rpm Centre - standard/reduced to 5MT / 3MT Swivel angle, clockwise / counterclockwise 15° /90° Wheelhead (X axis) Maximum diameter ground: using a 350mm dia wheel - 300mm Using a 300mm dia wheel - 350mm Total infeed 245mm Maximum programmable dia infeed rate 100mm/min Dwedezh Nfcjpfx Abzea Minimum programmable increment (dia) 0.001mm Swivel range clockwise / counterclockwise 190° / 45° External grinding wheels Wheel size (left) 350 x 50 x 127mm Wheel size (right) 300 x 25 x 127mmm Spindle speeds 1775, 2068, 240rpm Motor 4kW Internal grinding wheels Wheel size 19 - 38mm Wheel spindle speeds 16500,24000,10500rpm Motor 2.2kW Table (Z Axis) Maximum grinding length between centres: 1300X - 700 - 700mm 1300X - 1000 - 1000mm Maximum traverse speed 5000mm/min Minimum programmable increment 0.001mm

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Year of manufacture: 1994 Djdpfx Asy Rmxusbzswa

Condition: used, Model: CW Serial No: 26520 Dodpfsyx Hx Djx Abzowa Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: used, Year of construction: 1990, grinding diameter max. 1-150 mm regulating wheel width 100-200 mm weight 5 t Dwsdpfx Aboztfz Dezea

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm Dedpfxsztfzws Abzjwa drilling length ca 165 mm lip angle 90-140 °