Used Stairs for sale (207)

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors Cjdpjvw Egrjfx Ac Tehb All manuals and spare parts included Can be seen running In excellent condition

Condition: used, 4m Length, 670 working height, 850 minimum stroke. 8 x Cramping bars at 500mm centres 3 x Hyrdaulic cylinders via motorised pump with starter Chodjymm Sfepfx Ac Teb Suitable for open plan and wedged stairs

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Cjdpjyfta Tefx Ac Tshb Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Chjdozwcfzspfx Ac Tob Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm Chedpszxxqvefx Ac Teb - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Chsdpszv Eaxefx Ac Teb Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: like new (used), Year of construction: 2018, We offer You line Cabinplant with Multivac for snack packing. Production date of all machines year 2018. Line consisting af -Cabinplant 1 line elevator -Cabinplant 3 line elevator -Multihead weigher Cabinplant MHW 10 24 -Multihead weigher Cabinplant MHW 10 32 -KEN hygiene system EWD 50 -Platform with stairs -Cabinplant distribution tools 2 pcs -Multivac R245 Type ASE 500, gas, vacum, without a vacum pump The set worked only during device tests, working for approximately 100 hours. The line was dismantled by the manufacturer's services: Cabinplant and Multivac. Csdjpxm Ugopfx Ac Tjhb

Condition: like new (used), Year of construction: 2000, functionality: fully functional, Dowel and slot drilling machine GANNER GANNOMAT JUNIOR 323 in very good condition, the machine is in absolute new condition; it comes from a very small carpentry shop and only has some paint damage, as it has not been used for about 18 years. With this machine, you can mill slots and drill dowel holes on 2 levels without re-clamping. 380V, 1500W 2800 rpm Year of manufacture 2000 With this machine, you can mill slots for, for example, lock boxes and similar items, or produce all types of frame dowel connections at right angles, flush, and mitered. Ideal for the production of dowel connections in timber frame construction, furniture, door, window, and stair construction, and for similar applications. Drilling on 2 levels, the grid and stops, and the design of the machine allow dowel connections to be produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Cjdpfx Acezxuiue Tshb Mills and drills very well and cleanly. With 2 angle stops (one center stop and one side stop that can be used on both sides). At the front of the machine table, there is a 2000 mm long stop rail with 2 folding stops; the stop rail can be shortened or extended if required. The workpiece is clamped using 2 pneumatic clamping cylinders. The height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures a quick adjustment of grids and the drilling levels. The heights of the individual drilling levels can be read on 2 mechanical dials; adjustment screws are located above the dials, which can be used to adjust the drilling heights. With a precision 12 mm grid rail, which has a center grid and 12 grids on the left and right. Can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right and then has a working width of max. 420 mm. The max. drilling hole height is 100 mm. The max. drilling hole depth is 150 mm with stop and scale. The max. workpiece height is 160 mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, which means you have no risk when purchasing; delivery to Austria and the EU is also possible upon request. The machine table is 870 mm wide, 140 mm deep on the sides, and 350 mm deep in the center. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. With 2 chucks up to 20 mm. Very stable and durable design. The precision guides with the play-free ball bearing bushes are OK and move smoothly.

Condition: good (used), Year of construction: 2014, Stairs / Staircase with intermediate landing – used: Price: €2,500 (net), disassembled, packed, and loaded at the location! Chodpfx Aozqz T Dec Tjb Item 1 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Ground floor to landing: approx. 14 steps (the 14th step is at the level of the landing) Landing to upper floor: 11 steps (the 11th step is at the level of the upper floor) Distance between steps: approx. 18.5 cm Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump Codpfjzfx A Eox Ac Tohb * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Chedpouyl Npsfx Ac Tsb

Condition: good (used), Year of construction: 2014, Various staircases – used: Chodpfxezqz Saj Ac Tob Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Condition: good Available: approximately Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, working width: 450 mm, warranty duration: 12 months, total height: 220 mm, total width: 460 mm, total length: 880 mm, water tank capacity: 10 l, We offer for sale a BR 45/10 Esc Staircase Scrubber Condition – Very good Year of manufacture – 2014 The machine is in very good condition – both visually and technically. It has undergone a complete, thorough overhaul, making it fully functional and ready for operation. Each device we offer is presented in authentic photos – you are buying exactly the machine shown in the pictures. All machines purchased from us come with a 12-month WARRANTY. Technical Data: Brush working width (mm): 450 Working/suction width (mm): 450 Tank capacity (l): 10 Brush rotation speed (rpm): 290 Brush motor power (W): 190 Chsdpfxjw Igrzj Ac Tsb Vacuum motor power (W): 1500 Voltage (V): 220 / 240 Frequency (Hz): 50 Weight (kg): 44 Dimensions (L x W x H) (mm): 880 x 460 x 220

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. Cedpfx Ajv H D Tvoc Tehb You can adjust the step length, step thickness, riser thickness, tread height and step nose. The machine has been completely overhauled and is technically in mint condition. Newly painted.

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,500.00 (net), dismantled, packaged, and loaded at the location! Item No. 12 Manufacturer: Stow Type: unknown Codpfx Acezqz Smo Tohb Year of manufacture: 2014 From ground floor to landing: approx. 10 steps (with the 1st step at the level of the landing) From landing to upper floor: 12 steps (with the 12th step at the level of the upper floor) Distance between steps, presumably approx. 18.5 cm (to be confirmed) Width: to be confirmed With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, large staircase with 2 intermediate levels – used: Price: €4,000 (net), disassembled, packaged, and loaded at the location! Chodjzqz I Uopfx Ac Teb Item No. 14 Manufacturer: Stow Type: unknown Year of construction: 2014 Distance between steps will be provided later. Width of the staircase will be provided later. Dimensions of the landings will be provided later. Ground floor to landing 1: Number of steps will be provided later. Landing 1 to landing 2: approx. 14 steps Landing 2 to upper floor 2: With 2 intermediate levels Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. end of Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2004, functionality: fully functional, DOUBLE-ENTRY STORAGE PLATFORM, without access stairs. Dimensions: 4.30 x 19.60 = 84 m2 or 120 m2. PRICE IS FOR THE PLATFORM IN ITS CURRENT STATE. DISASSEMBLY IS POSSIBLE within one month. Cedpsx Rdrlefx Ac Tshb The sale corresponds to 70% or 100% of the current platform. Inspection before disassembly is mandatory.

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Chsdozqz Syjpfx Ac Tob Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Approximately 10 steps from the ground floor to the landing Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Dimensions and price depending on dimensions for one each Codomn Ipuopfx Ac Tjhb stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro 275 mm high 22 Euro 320 mm high 25 Euro

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Chedpeig T Epofx Ac Teb Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Condition: used, Year of construction: 2024, Manufacturer : WAM MAP Model : WBHC Year : 2024 Type: Ploughshare mixer Material: stainless steel Condition: new Volume : 300 L Number of ploughshares: 6 Motor power: 9.2 kW Dimensions: 210 x 90 x 77 cm Control electrical cabinet with variable speed drive. Cedpfezv Uzlox Ac Tohb Optional: chopper; original plugin connector available. Optional extras: original platform + stairs. Photos available on request.

Year of construction: 2018, condition: good (used), Loading ramps, Butt, BKV 614, 6 tons, non-movable – used: Price at location: now only €7,500 instead of €9,500 (net) Manufacturer: Butt Type: BKV 614 Year of manufacture: 2018 Load capacity: 6,000 kg Driveway with grating Chedpfjzikbzjx Ac Tob Length: approx. 14.41 m Width: approx. 2.88 m Width with stairs: approx. 3.73 m Width of the driveway: approx. 2.77 m Height of the ramp: 1.28 m (where the plates rest on the truck loading ramp of the building) The ramp is not mobile – or rather, not movable! Condition: very good Available: immediately or August 2026 Location: Euskirchen

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Approximately 10 steps from the ground floor to the landing Chjdpfezqz Nlsx Ac Tob Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Chsdpey Enwhsfx Ac Tjb Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands.

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation Chedpforu Evgjx Ac Tsb - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE