Used Stair Thrower for sale (218)

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Nodpfxevw Egro Abyodc Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: used, 4m Length, 670 working height, 850 minimum stroke. 8 x Cramping bars at 500mm centres 3 x Hyrdaulic cylinders via motorised pump with starter Nodpfxoymm Sfe Abyjdc Suitable for open plan and wedged stairs

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Ndjdpfjyfta Tex Abyec Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily realized thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowelling on two levels without adjustment The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then carried out pneumatically from the front Cross adjustment approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Chassis Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is very rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (L x W x H), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps. Nedpfx Aoz H Rp Debyjdc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, working width: 450 mm, warranty duration: 12 months, total height: 220 mm, total width: 460 mm, total length: 880 mm, water tank capacity: 10 l, We offer for sale a BR 45/10 Esc Staircase Scrubber Condition – Very good Year of manufacture – 2014 The machine is in very good condition – both visually and technically. It has undergone a complete, thorough overhaul, making it fully functional and ready for operation. Each device we offer is presented in authentic photos – you are buying exactly the machine shown in the pictures. Nsdpfxsw Igrzs Abyjdc All machines purchased from us come with a 12-month WARRANTY. Technical Data: Brush working width (mm): 450 Working/suction width (mm): 450 Tank capacity (l): 10 Brush rotation speed (rpm): 290 Brush motor power (W): 190 Vacuum motor power (W): 1500 Voltage (V): 220 / 240 Frequency (Hz): 50 Weight (kg): 44 Dimensions (L x W x H) (mm): 880 x 460 x 220

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Nedpfjzwcfzex Abyedc Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: good (used), Year of construction: 2004, functionality: fully functional, DOUBLE-ENTRY STORAGE PLATFORM, without access stairs. Dimensions: 4.30 x 19.60 = 84 m2 or 120 m2. PRICE IS FOR THE PLATFORM IN ITS CURRENT STATE. DISASSEMBLY IS POSSIBLE within one month. Ndsdpfjx Rdrlox Abyec The sale corresponds to 70% or 100% of the current platform. Inspection before disassembly is mandatory.

Condition: like new (used), Year of construction: 2018, We offer You line Cabinplant with Multivac for snack packing. Production date of all machines year 2018. Line consisting af -Cabinplant 1 line elevator -Cabinplant 3 line elevator -Multihead weigher Cabinplant MHW 10 24 -Multihead weigher Cabinplant MHW 10 32 -KEN hygiene system EWD 50 -Platform with stairs -Cabinplant distribution tools 2 pcs -Multivac R245 Type ASE 500, gas, vacum, without a vacum pump The set worked only during device tests, working for approximately 100 hours. The line was dismantled by the manufacturer's services: Cabinplant and Multivac. Nsdpfx Aepxm Ugsbyodc

Condition: excellent (used), Used stairwell container, 16 ft, CONTAINEX, in good condition. - Extensions available and can be supplied. Dimensions: Nsdpez S Eckofx Abyedc Length: 4.89 m Width: 2.44 m Height: 2.80 m Loading and transport can be arranged. Only serious and legitimate inquiries including name, email address, and phone number will be answered.

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Ndodpfo Adr Hxjx Abyec Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. You can adjust the step length, step thickness, riser thickness, tread height and step nose. Ndedpfsv H D Tvex Abyec The machine has been completely overhauled and is technically in mint condition. Newly painted.

Condition: good (used), Year of construction: 2014, Stairs / Staircase with intermediate landing – used: Price: €2,500 (net), disassembled, packed, and loaded at the location! Item 1 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Ground floor to landing: approx. 14 steps (the 14th step is at the level of the landing) Landing to upper floor: 11 steps (the 11th step is at the level of the upper floor) Distance between steps: approx. 18.5 cm Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Nsdpszqz T Defx Abyjdc Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there Ndjdpfx Asz I Eggjbyec it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. Nodpfx Aozv Eaxsbyedc 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, functionality: fully functional, Hymer Aluminium Stairway Bridge. The stairway bridge from Hymer is practical and robust. It offers easy handling and ensures safe ascent and descent. The durable design guarantees longevity and reliability in every application. Nsdow Nhkbepfx Abyodc The stairway bridge is already packaged (see images) and ready for shipment. Packing dimensions: 250x100 cm Technical data: • Number of steps: 5 steps • Step width: 60 cm • Lower platform height: 116 cm • Platform length: 128 cm • Platform width: 65 cm • Max. load capacity: 150 kg per m³ • Material: aluminium • Total weight: approx. 95 kg • Packing dimensions: 250 x 100 cm

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Ndjdjzfx A Eopfx Abysc Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY Nedpfozxxqvox Abysdc WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Year of construction: 2014, Various staircases – used: Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Nsdpfx Abjzqz Sajysdc Condition: good Available: approximately Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Ndedpfsz Sk Aqox Abysc Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Condition: used, functionality: fully functional, Aluminium staircase bridge The staircase bridge stands out with its ease of operation and sturdy construction. It ensures straightforward use and safe access both up and down. The robust design guarantees durability and reliability with every application. Nodpfow Nhn Hox Abyjdc The staircase bridge is already packed (see pictures) and ready for shipment. Packing dimensions: 270 x 130 cm Technical specifications: • Number of steps: 5 • Material: Aluminium • Total weight: approx. 140 kg • Packing dimensions: 270 x 130 cm

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery Njdpfx Abjz E U Dieysdc - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro Ndjdpfsmn Ipuex Abyjc 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro 275 mm high 22 Euro 320 mm high 25 Euro

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Nodpfx Ajig T Epobyjdc Chain magazine with 24 positions.

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,500.00 (net), dismantled, packaged, and loaded at the location! Nedpezqz Smefx Abyjdc Item No. 12 Manufacturer: Stow Type: unknown Year of manufacture: 2014 From ground floor to landing: approx. 10 steps (with the 1st step at the level of the landing) From landing to upper floor: 12 steps (with the 12th step at the level of the upper floor) Distance between steps, presumably approx. 18.5 cm (to be confirmed) Width: to be confirmed With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 2132 5x, functionality: fully functional, operating hours: 150 h, number of slots in tool magazine: 12, total length: 3,200 mm, total width: 2,070 mm, overall weight: 10,000 kg, For sale: AES Ultra Raptor 2132 – 5-axis CNC machining center We are selling an AES Ultra Raptor 2132 CNC machining center, a top-of-the-line machine for processing wood, MDF, particleboard, compact panels, and other panel materials. Features: ✔ 5-axis machining ✔ Working area: 3000 x 2100 mm ✔ Automatic tool changer Ndedpszzzbcefx Abyjc ✔ Nesting table with vacuum clamping ✔ High precision and productivity ✔ Suitable for the production of furniture, stairs, doors, kitchens, and other custom-made products The machine is in excellent condition and ready for operation. Price: €75,000 + VAT For more information, photos, or to arrange a machine inspection, please contact us.