Used External Staircase for sale (5,727)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes Fgsdpfx Asz En Axoa Ieh End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Fgsdpfx Aaez Ebb Us Ioh Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Tools included

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 Fgsdpjz En Afofx Aa Ish EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump WINDOWS control Fgedpfx Aaoz Ekcno Ish The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Fgedpoz Ekfvefx Aa Ish Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine Fjdpfx Aeyy Rtzea Iegh In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Fsdpez Eklvsfx Aa Ijgh Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Motor power, scoring saw: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Clamping system, clamping jaws: 10 EQUIPMENT Lift table Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 353 h, machine/vehicle number: A3000082409, load capacity: 230 kg, fuel type: electric, drive type: Elektro, working height: 8,000 mm, No minimum price – guaranteed sale to the highest bidder! Fgsdpfoz I Iqnex Aa Ijh TECHNICAL DETAILS Load capacity: 230 kg Working height: 8,000 mm MACHINE DETAILS Drive type: Electric Operating hours: 353 h External reference: SL16561

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Fgodpfx Asz Ekh Dsa Ioh Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393Z00745, Year of construction: 2009, operating hours: 32,592 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,874 mm, fuel type: gas, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,900 mm Free lift: 1,874 mm Overall height: 2,641 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,925 kg Operating hours: 32,592 h Fjdpfx Aaoz I I I Hj Iogh EQUIPMENT 3rd valve 4th valve Heater Full cabin External reference: SL16126SLO

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Fjdpfx Asz Ekczoa Isgh Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394A01233, Year of construction: 2010, operating hours: 9,499 h, load capacity: 4,500 kg, lifting height: 4,400 mm, fuel type: gas, mast type: simplex, construction height: 3,121 mm, drive type: Treibgas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fjdpfx Aez I R Agea Isgh Load capacity: 4,500 kg Lifting height: 4,400 mm Overall height: 3,121 mm MACHINE DETAILS Mast type: Standard Vehicle type: Internal combustion forklift Operating hours: 9,499 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cab External reference: SL12694SP

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, load capacity: 200 kg, fuel type: electric, working height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 200 kg Fjdsz I I Iaspfx Aa Iogh Working height: 10,000 mm MACHINE DETAILS Drive type: Electric Weight: 2,735 kg Rated power: 1.2 kW Operating hours: 836 h External reference: SL16147SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394C01558, Year of construction: 2012, operating hours: 11,960 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,421 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,000 mm Overall height: 3,421 mm Load capacity: 5,000 kg Fgjdpfxoz I Rqwj Aa Ish MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 8,830 kg Operating hours: 11,960 h EQUIPMENT Half-cab Side shifter 3rd valve 4th valve Heater External reference: SL14107SP

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press Fjdpfewqr R Aox Aa Ijgh For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: black, overall weight: 4,000 kg, maximum load weight: 4,000 kg, loading space width: 4,800 mm, loading space length: 6,000 mm, loading space height: 5,000 mm, machine/vehicle number: Bürocontainer Modell MODULHAUS 57,6 m², Office containers | Living containers | Construction containers | Model MODULHAUS | 480 × 600 x 500 cm | High-quality & flexible solution Our containers, which are immediately available, can be inspected and collected directly from our warehouse. Our office and living containers offer an excellent solution for a variety of applications and impress with outstanding quality, high flexibility, and short delivery times. Technical data Dimensions: • Width: 480 cm • Length: 600 cm • Height: 500 cm • Floor area: 57.6 m² Construction & Insulation • Self-supporting steel frame construction • Frame made of galvanized steel profile, wall thickness 2 mm • Roof and wall panels: 50 mm PUR (polyurethane) • Optional: 100 mm insulation (PUR / PIR / mineral wool) • Floor construction:  – Supporting structure made of steel  – 16 mm fiber cement panel  – PVC flooring Ground floor (240 cm × 600 cm): • 1 spacious room • 1 fixed glazing (single-leaf) with electric roller shutter (internal control) • 1 three-part fixed glazing with electric roller shutters (internal control) • 1 double-leaf glass door with electric roller shutter (remote control) • 3 standard windows with manually operated roller shutters • External staircase with intermediate landing (steel construction) • 6 m long, 1 m deep sun protection/canopy structure along the entire front • Exterior color: RAL 7016 (anthracite gray) Upper floor (240 cm × 600 cm): • 1 spacious room • 1 glass door with electric roller shutter (remote control) • 4 standard windows with manually operated roller shutters • 1 m deep and 1 m wide sun protection/canopy structure • Exterior color: RAL 7016 (anthracite gray) Special features • Modular, stackable design (2 stories) • Quick assembly and flexible applications • Suitable as an office, living, or construction site container Fsdpfxjy A Ic Ej Aa Ijgh Warehouse & Delivery • In-stock item: Same-day shipping possible • Not in stock: Production time depending on the model, approx. 2-4 weeks • Worldwide shipping: Reliable and professional delivery to all countries • Custom sizes: Production according to customer-specific requirements possible 📍 Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to provide you with further information or tailor-made solutions!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394C04103, Year of construction: 2012, operating hours: 19,070 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,070 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fgodez I I Ruopfx Aa Ieh Lifting height: 4,100 mm Overall height: 3,070 mm Load capacity: 5,000 kg MACHINE DETAILS Mast type: Simplex Fuel type: Diesel Unladen weight: 7,600 kg Operating hours: 19,070 h External reference: SL15892SP

Condition: used, Year of construction: 2012, operating hours: 99,097 h, working height: 45 mm, power: 6.5 kW (8.84 HP), working length: 2,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working length: 2,600 mm Maximum working height: 45 mm MACHINE DETAILS Fgodpfsz Ekhdsx Aa Ioh Installed total power: 6.5 kW Operating hours (according to the meter): 99,097 h The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6063

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Fodpfjz Ekkxjx Aa Ijgh Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: good (used), functionality: fully functional, Used container system, dry, sealed, clean - Manufacturer: ALHO - Consisting of 16 + 2 x 20-foot containers = approx. 270 m² - Current use: temporary school - Available from July 31, 2026 Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.95 m Internal height: 2.50 m Insulation: Wall: 80 mm Floor: 100 mm Ceiling: 80 mm Equipment: Fgjdpfx Aszhgt Roa Ieh - Central staircase consisting of 2 x 20 ft containers - 4 classrooms, each consisting of 4 x 20 ft containers - 2 emergency staircases for the upper floor - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Electric heating - Sealing strips - Wall cladding - Ceiling cladding - Threshold plates - Container clamps - Acoustic elements Manufacturer's documentation is available. Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, and these must include: name, email address, and telephone number.

Condition: used, Core Weighing Performance • Maximum Capacity: 35,000 g (35 kg) • Readability / Scale Interval: 0.1 g • Tare Range (Subtractive): -35,000 g • Maximum Linearity: < ±0.2 g • External Calibration Weight: 10 kg (Class F2 or better recommended) Fjdpfoz Ic Stex Aa Ijgh Physical & Environmental Build • Weighing Pan Dimensions: 350 × 240 mm (Stainless steel flat pan) • Overall Dimensions (W × D × H): 350 × 240 × 132.5 mm • Net Weight: Approx. 11.4 kg

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Fodpfxjz Ekgge Aa Ijgh Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN556243, Year of construction: 2017, operating hours: 8,754 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,190 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,700 mm Fjdpfx Aez I R I Aja Iegh Free lift: 1,600 mm Overall height: 2,190 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex Vehicle type: Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Battery voltage: 12 V Battery year of manufacture: 2017 Unladen weight without battery: 3,537 kg Operating hours: 8,754 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve External reference: SL8945SP

Condition: good (used), Used container unit, dry, sealed, clean - Manufacturer: ALHO - Consisting of 16 room containers + 2 stairwell containers, each 20-foot container = approx. 270 m² - Current use: temporary school – available from 31.07.2026 Fedpfx Aaezq Eipj Iogh - Individual sale possible, in batches of 4 containers = 60 m² Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.95 m Internal height: 2.50 m Insulation: Wall: 80 mm Floor: 100 mm Ceiling: 80 mm Equipment: - Central stairwell consisting of 2 x 20 ft containers - 4 classrooms, each consisting of 4 x 20 ft containers - 2 escape staircases for the upper floor - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Electric heating - Sealing strips - Wall panelling - Ceiling panelling - Threshold plates - Container clamps - Acoustic elements Manufacturer's documentation is available. Loading and transport can be arranged. Only serious and credible inquiries will be answered, and must include the following information: name, email address, and telephone number.

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS Fsdpfx Aajz Ekbke Ijgh The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042