Used Spraying Technique for sale (2,055)

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Blodszil T Ejpfx Afmjp Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: unexamined, machine/vehicle number: nicht mehr vorhanden, overall weight: 200 kg, This is a laboratory spray tower with a water evaporation rate of 3 to 5 kg/h, using a two-component nozzle. It will be sold to the highest bidder. Blsdpfxozupius Afmep

Condition: used, Ceever Spraymaster Turning Spray Washing System The Spraymaster series of industrial washing systems offers advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table, which enables uniform wetting of the components with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Blodpfxex Ex Nzs Afmop Manufacturer: Ceever Type: Spray Master Turning Machine No.: Z 429 Load: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Blodpjx Dbkcefx Afmsp Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar. ✅ Power - 4.8 kW. ✅ Weight - 800 kg. ✅ Dimensions - 1300 x 1100 x 2100 mm (L x W x H). ✅ Bottle formats - 750ml glass bottles: clear (Ø74 mm x 302 mm high) and green Burgundy (Ø83 mm x 297 mm high). ✅ Intended use - still (non-sparkling) liquids. Supplied for wine. EU Declaration of Conformity (Machinery Directive 2006/42/EC) and operating manual available.

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Bsdjzh D Rmspfx Afmelp Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2008, functionality: fully functional, compressed air connection: 5 bar, inner dimension height: 3,000 mm, inner dimension length: 17,700 mm, inner dimension width: 5,260 mm, Equipment: documentation/manual, Due to the restructuring of our workshop, we are offering our professional GARMAT spray booth installation for sale. The installation is currently in use and can be inspected while operational. Dismantling is possible from mid-December. This is a complete installation consisting of a spray booth, drying chamber, paint preparation area, burner, and ventilation and extraction systems. Dimensions: Laboratory / preparation area: 2.26 m wide x 5.26 m long x 3.03 m high Spray area: 6.00 m wide x 5.26 m long x 3.03 m high Floor extraction with a pit 5.00 m wide x 3.16 m long Wall extraction across the full width of 5.00 m and 2.00 m high Ceiling extraction available Drying chamber: 9.40 m long x 5.26 m wide x 3.03 m high Can be closed with two sliding doors Usable sliding door opening: 2.40 m Equipped with heating, extraction, and burner Technical data: Brand: GARMAT Bjdpfj Agw A Tjx Afmslp Installation type: MASTER 15.5/5.26/3 Burner capacity: 300 kW Frequency controller included Includes control panel GMD 105 Separate paint preparation area with its own extraction system Technical specifications and detailed photos are available and are part of the sales information. Important: The installation is currently operational. Available for dismantling from mid-December. Dismantling, loading, and transport are the full responsibility of the buyer. Sale is in the condition the installation is currently in. Price: to be agreed / offers invited.

Year of construction: 2010, condition: like new (used), We are selling: TOTAL WALTHER spray deluge system / sprinkler container with 13 extinguishing groups, year of manufacture 2010, used for a short period only, in new condition. The system is still completely installed (including piping). The spray deluge system automatically monitors its operational readiness. Monitoring center, manufacturer: TOTAL WALTHER; type: MZ382100; approval number: G4860030. Number of monitoring contacts: 41 Fully functional On-site inspection possible at any time Offered price in 2010: €161,422.00 Bodpfognguvox Afmolp Additional documents (technical data sheets, operating instructions, etc.) can be requested if needed.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Bjdpfxozinzlo Afmolp Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: used, Year of construction: 2011, Technical data: - VEN SPRAY PERFECT automatic spraying machine - Year of manufacture: 2011 Bljdpfx Aezv Tczsfmep - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1 pcs. - Number of installed spray devices 4 pcs. - Number of material pumps 1 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm - Total connection 22 KW - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Köhler Type: HKT 500 WTG Köhler salt spray chamber, corrosion chamber Köhler salt spray chamber HKT 500 Operation via touchscreen Blodpfx Afszd Ux Temop Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber, room temperature to 50°C Power supply: 230V 1P/N/50Hz 3000W Weight: 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, 2 rows of paper volume filters approximately 650 x 1,800 mm, internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, Bjdpfx Afspvil Tjmelp motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, subject to prior sale.

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Bsdpfx Afe Ahkfnjmslp Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 8,000 mm, total width: 5,000 mm, total height: 3,130 mm, inner dimension length: 7,800 mm, inner dimension width: 2,500 mm, inner dimension height: 2,700 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, temperature: 65 °C, Equipment: documentation/manual, overall dimensions of the device: 8000 [mm]: * device length - 5000 [mm]: device width 3130 [mm]; (from item 0 device height - - working clearance of the device: 2530 [mm]: height of the technological opening - . * width of the technological opening - 400 [mm]. - electrical power: 400/230V:N+PE: 50 Hz 36.0 [kW]; * supply voltage, installed power - - - water supply parameters - 2.0 [bar] (0.2 MPa) - running water, d=32 [mm] - gas parameters for burner supply * natural gas GZ 50 • 3/4" connection • minimum gas pressure at the burner -13.8 mbar • minimum gas flow washing machine working chamber - 7800x1500x2700 mm - working chamber dimensions - washing machine working chamber made of - black steel structure, PP plate - chemical-resistant roof fan 2.2 Washing bath tank. material: • supporting structure - black steel structure, - grade 316. * inner lining - 50 mm thick * insulation - mineral wool - PP plate outer lining - 4000 number of baths - natural gas heating medium - 120 kW - automatically adjustable heater power bath temperature - 40 to 65 °C temperature range - PT100 sensor - rod-type bag filter sensor temperature sensor - Blodpfx Aez Dtgaofmep bath level sensor - filtration of the bath from particles using an external bath circuit (the filter has its own circulating pump) 2.3 Rinsing tank 1. - PP - 3000 L material, number of baths, level sensors - - 2.4 DEMI rinsing tank. - PP material - 3000 L number of baths - level sensors - 2.5 Bath circuit circulating pumps washing - max 222 m³/h - 18.5 kW rinsing - max 198 m³/h - 11 kW DEMI rinsing - max 198 m³/h - 11 kW suction pump - max 222 m³/h - 18.5 kW circulating pump DEMI - 4 m³/h - 0.37 kW diaphragm pump 75 /

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Bljdpfjwty H Dex Afmjp Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Bljdpfxjzzzpgj Afmsp Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG MORI DMU 95 monoBLOCK was manufactured in 2022. It features a working range of 950 mm x 850 mm x 650 mm, 40 bar IKZ and a motor spindle with a speed of 20,000 rpm. The machine includes a double gripper chain magazine with 60 stations and an NC swivel rotary table with a diameter of 850 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 monoBLOCK vertical machining centre. Contact us for further details. - Motor Spindle: speedMASTER 20,000 rpm- Spindle Drive Power: 35 kW (40% DC / ED) / 25 kW (100% DC / ED)- Tool Interface / Taper: HSK-A 63 according to DIN 69893 (adapted working spindle and magazine)- Tool Changer: Double gripper chain magazine with 60 tool stations- Rotary Table: NC swivel rotary table, C-axis table surface: dia. 850 mm x 750 mm, integrated into rigid table 1,000 mm x 750 mm- Internal High-Pressure Coolant (IKZ): 40 bar / 23 l/min through spindle centre (AD), frequency-controlled- Coolant Tank / Filtration: Bürener Maschinenfabrik 600-litre coolant unit with paper band filter- Chip Disposal: Scraper flight chip conveyor (discharge height: 950 mm, width: 970 mm) - External Coolant Supply: 4 bar / 40 l/min- Washdown & Flushing: Ring coolant nozzle for vertical headstock (16 water / 7 air nozzles), work area door chip wash, manual spray gun- Spindle Air Blast: Air blast through spindle centre selectable via M-function- Mist Collector: Oil and emulsion mist extraction unit with mechanical filter (throughput volume: 1,100 m³/h)- In-Process Probing: Renishaw PP60 optical (OMP 60) infrared touch probe- Tool Measurement: Blum Laser DIGILOG for vertical tool length and diameter measurement in workspace- Workspace Visibility: Rotating viewing window (Rotoclear) in machine door- Spindle hours: 1.031 h, Machine-On: 2.190 h Technical Specification Blodpj Ahpm Ajfx Afmop Taper Size HSK 63

Condition: excellent (used), Year of construction: 2015, I sell the spraying automat Superfici Magnum. Configuration: 2 arms - 2 heads x 2 guns (4 guns total) Manufacturer: SCM Superfici Bedpfx Afowg Tunsmolp Model: Magnum. Working width: 1350mm Year 2015. Available immediately. Fully working.

Condition: like new (used), Year of construction: 2021, operating hours: 1,150 h, functionality: fully functional, machine/vehicle number: nvt, total length: 22,130 mm, total height: 3,620 mm, workpiece height (max.): 750 mm, workpiece length (max.): 600 mm, sheet thickness steel (max.): 8 mm, Are you looking for a direct expansion of your production capacity, or do you want to elevate your finishing quality to the highest possible level? Due to unforeseen circumstances, we are offering our powder coating system for sale. The line has been operational since December 2021 and is in absolute new condition, both visually and technically. No long lead times or start-up problems: the entire line is currently fully assembled and can be inspected in working order at our location in Hoogeveen. You will see exactly what you are buying! Design and production principles: The system is specifically designed for high-quality and continuous processing of smaller series products: Blsdpfx Afo Af Tv Esmsp - Target machine: Optimally configured for smaller parts and series products - Option for Glasbeek to disassemble and reassemble the machine. Costs for this can be requested. Included in this complete line: - Spray tunnel (3-stage) with emergency floor (Glasbeek) - Demi-water system - Air knife - Combined continuous drying/curing oven (Glasbeek) - Continuous powder booth/extraction wall (Glasbeek) - Spray equipment (GEMA) - Powered chain conveyor with tensioner and automatic lubrication station (Railtechniek) - Control cabinet The prices mentioned are excluding VAT. All documents are available and can be requested. The line has been maintained by Glasbeek.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Bedpfx Ajy Iamtofmslp

Condition: used, Storage location: Nattheim Blodpfx Ae Adriyofmop

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We are offering this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Bledozhbd Rspfx Afmjp Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MClL-800?OSK+KK, input voltage: 400 V, type of input current: three-phase, type of cooling: air, total width: 2,330 mm, total length: 2,150 mm, total height: 2,800 mm, sheet thickness aluminum (max.): 2 mm, continuous operating pressure: 0.5 bar, table length: 1,150 mm, Equipment: hot water, type plate available, Industrial rotary spray washer with fume extractor and ion exchange station. Designed for washing steel, aluminum, non-ferrous metal elements with a maximum load of 250 kg and dimensions of 1000x800 mm. Technical documentation and completed swewis are available for the station. More information at the phone number. Bljdpfx Afownbh Esmjp

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour Bedpfx Afox Ig Tmomelp - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Bjdpfxsqzx Nks Afmelp Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: used, WEISS TECHNIK Salt Spray Test Chamber / Corrosion Test Chamber SC 1000 Professional salt spray test chamber for corrosion, salt spray, and condensation tests For sale is a used salt spray test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for professional corrosion tests, salt spray tests, and condensation tests in laboratories, the automotive industry, research, and quality assurance. Equipped with a color touch panel, Ethernet interface, and a test chamber volume of approximately 950 liters. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of manufacture: 2015 Test chamber volume: approx. 950 liters Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Compressed air: 4–10 bar (max. 10 bar) Deionized water: 3–5 bar Control: Programmable color touch control Ethernet network interface RS232 interface Dimensions: External dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test chamber dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test chamber volume: approx. 950 liters Weight: Tare weight (without brine): approx. 220 kg Equipment: 950-liter test chamber Color touch panel Ethernet interface RS232 interface Programmable control Salt spray testing Condensation testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Application areas: Corrosion testing Salt spray tests Condensation tests Material testing Coating testing Paint testing Automotive industry Quality assurance Testing laboratory Research and development Scope of supply: Blodpfjzlgyrex Afmjp Weiss Technik SC 1000 Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.