Combined spray paint and drying booth

NAVERA / VERTA MAXI RANGE 15-NOVA VERTA

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Pjdsxp Ecyopfx Adwsrb Motor power: 2 x 15 kW

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm Psdpfxofyadbe Adwerb - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional. Podpfx Adszd Uf Tsworb

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Prsdpfx Adeygu Smewob Width:6000mm Height:6000mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Pedpfx Aeznz Uiedwerb Cutting depth: 4300 mm 7.5 kW main blade unit Scoring blade unit 1 fixed front table with air cushion 3 mobile front tables with air cushion Pushing carriage with approx. 7 clamps WinCut software Foot pedal for cycle start and stop Safety guards Weight approx. 3277 kg. Available starting September 2026.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Predpfx Ajy E Huxodweb

Condition: not inspected (used), Year of construction: 2004, functionality: fully functional, operating hours: 3,450 h, input voltage: 400 V, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, total length: 3,500 mm, total width: 2,100 mm, total height: 1,800 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. Since someone is not always on-site, please call or send a message in advance. ━━━━━ SCM SI 450 Vanguard Psdjztduvjpfx Adwjrb A very nice panel saw with top-notch features! The machine is located in 92353 Postbauer-Heng. - Approximately 3,500 operating hours - Parallelogram support table - All axes CNC controlled - Scoring unit - Parallel fence adjustable with ball screw drive (high-end solution; it is usually adjusted with a steel bar) - On/off switch on the sliding table - Year of manufacture: 2004 - Including operating manual ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes are reserved by the manufacturers. Price changes, sales subject to prior sale, and printing errors are reserved. Prices apply for collection. Shipping is possible for an extra charge and by arrangement. A forklift is available for loading.

Condition: used, Checkweigher Mettler Toledo IND560 Scale manufacturer: Mettler Toledo IND560 Podpfx Aeyyynbjdworb Equipped with sensor and stop system for checkweighing purposes Machine has been tested for functionality

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Prjdpsy R U Abefx Adwob Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500