Used Splitting Wedge for sale (973)

Condition: good (used), Steel holder, clamping plate with T-slot, wedge holder Nsdpewcxfqofx Aa Eowr -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Nwsdpfjtrmg Hjx Aa Eor

Condition: used, 3-jaw wedge bar chuck, presumably RÖHM or SCHUNK Equivalent to Forkardt F315 or SMW Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper DIN 55022 size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws 2 sets of chuck jaws consisting of base jaws for mounting top jaws Weight: 100 kg Good condition Njdpfx Aaew Dvv Nj Eswr

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1250 SC L 112, cutting speed: 30,000 mm/min, number of straightening rollers: 3, - 5 pairs of slitting knives – fully automatic positioning - Cross-cutting by means of a guillotine shear - Sheet width: 250 – 1250 mm - Sheet thickness, steel: 0.4 – 1.25 mm (400N/mm²) Nwedpfx Aaoxl U Uwo Eor - Sheet thickness, stainless steel: 0.4 – 0.9 mm (550N/mm²) - Sheet thickness, aluminium: 0.5 – 1.50 mm (AlMg3) - Min. strip width: 60 mm / 15 mm from sheet edge - Straightening unit: 3-roll, progressive, 180° swivel - Power supply: 3PH 400–488 V AC/N/PE - Compressed air supply: 25 l/min at 6 bar (short-term) Total run time: Length: 19,415 m Cuts: 6,852 -> Values may slightly change as the machine is still in use.

Condition: used, load capacity 7,700 kg can be screwed-on with insulation plate B4 Njdpfxofii Dpo Aa Eewr construction height 63 mm in middle position adjustment range +4 / -6 mm dimensions 200 x 200 mm internal thread M20 weight 9.5 kg - new - unused - 6 units on stock price per unit  

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Nodpev Dvhysfx Aa Eowr Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers Nwjdpfxjvvafye Aa Esr -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Condition: reconditioned (used), Fortuna UAF470 Surface Splitting Machine – Leather Splitting Machine Main Features: - Working width: 470 mm - Material feed by upper and lower roller Nodpfx Aasxuzr Ij Eowr - Automatic knife positioning - Three feed speeds - Automatic and manual material return - Integrated dust extraction and waste collection bin The machine is in excellent technical condition, fully overhauled.

Condition: used, 3-jaw wedge bar lathe chuck FORKARDT TYPE F+160 Nwjdpfxof Axprs Aa Ejr No. 1659 181 Identical to Forkardt, SMW or Röhm Diameter: 160 mm Inner diameter: 45 mm Chuck flange: Short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and hard top step jaws for turning 1 set of chuck jaws consisting of base jaws and soft top step jaws for turning - Central adjustment Weight: 11 kg good condition

Condition: used, Year of construction: 2003, machine/vehicle number: 20520, Trennsäge - Splitting Saw Metris MT 817Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nwedpfxoh Axn Dj Aa Ejr On Stock Emskirchen / Nürnberg - Can be test

Condition: used, load capacity 25,000 kg freestanding insulation plate and anti-slip plate on the underside anti-slip plate on the upper side construction height 88 mm in middle position adjustment range 13 mm dimensions 370 x 230 mm Nwedpfxsfii Dmj Aa Ejr weight 31.8 kg - new - unused - 21 units on stock  price per unit    

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. Njdsv Dvfropfx Aa Ejwr The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 65 mm -Insertion depth: 40 mm -Dimensions: 565/154/H105 mm Nsdpfx Aevvagkja Eewr -Weight: 20.1 kg

Condition: used, Splitter wedge for frame saw Rollers electrically driven Available mid-October Nsdpfx Aaexd Ub Ue Eowr Location: Austria, near Leoben

Condition: excellent (used), CAMOGA COMPACT 300MM SPLITTING MACHINE Model: Compact Infeed table height: 0.95 m Installed power: 1.0 kW Net weight: 173 kg Machine dimensions (m): 0.98 x 0.62 x 1.05 Technical data: Working width: 300 mm Maximum thickness: 5 mm Minimum thickness: 0.2/0.8 mm Knife dimensions: 0.5 x 40 x 2065 mm Features: - Automatic knife positioning - Independent extraction for abrasive dust and work residues - Wheel runs on precision roller guides - Optical viewer for phase verification - Analog thickness readout - Low noise level - Lubricated mechanical components - Full access to all components for easy and fast servicing - Features first introduced by Camoga Nodpoxk Thmofx Aa Ejwr Machine in perfect technical condition after complete technical overhaul

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Nodpfsxa D Hrsx Aa Eowr

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Nwodpfx Aaov Dvkze Eor Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm Nwodpob A R Tnsfx Aa Ejr -Weight: 12 kg

Condition: reconditioned (used), Working area: 400mm It has automatic knife approach Two material feed speeds Material feed: roller - roller Digital display of divided thickness Equipped with the possibility of automatic material retraction Equipped with dust extraction and waste basket Machine in PERFECT technical condition after a major service Working area: 400mm It has automatic knife approach Two material feed speeds Nwodpfxjwr Nnhj Aa Eer Material feed: roller - roller Digital display of divided thickness Equipped with the possibility of automatic material retraction Equipped with dust extraction and waste basket Machine in PERFECT technical condition after a major service Work area: 400 mm Automatic Messereinstellung Two Material feed speeds Material feed: roller - roller Digital display of divided thickness Equipped with the possibility of automatic material retraction Equipped with dust extraction and waste basket Machine in PERFECT technical condition after a major service Work area: 400 mm Automatic Messereinstellung Two Material feed speeds Material feed: Walze – Walze Digitale Anzeige der geteilten Materialstärke Automatischer Materialrückzug möglich Staubabsaugung und Abfallkorb vorhanden Maschine nach umfassender Wartung in einwandfreiem technischen Zustand

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 216 mm -Recess recording: mm Nwsdpodqck Hjfx Aa Ejr -Pitch circle: mm -Through hole: 50 mm -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Year of construction: 2014, condition: excellent (used), Fortuna AN400 CE surface splitting machine - leather splitting machine Main features: - 400mm working area - automatic knife positioning - smooth adjustment of material feed speed - dust absorber and waste basket Nwsdewpxwajpfx Aa Ejr - full manufacturer's documentation Machine in perfect technical condition Possibility of assistance in organizing transport Fortuna AN400 CE surface splitting machine - leather splitting machine Main features: - 400mm working area - automatic knife positioning - smooth adjustment of material feed speed - dust absorber and waste basket - full manufacturer's documentation Machine in perfect technical condition Possibility of assistance in organizing transport Fortuna AN400 CE Flächenspaltmaschine - Lederspaltmaschine Main features: - 400mm work area - automatic knife positioning - smooth adjustment of material feed speed - dust absorber and waste basket - full manufacturer's documentation Machine in perfect technical condition Possibility of assistance in organizing transport Fortuna AN400 CE Flächenspaltmaschine - Lederspaltmaschine Main features: - 400mm work area - automatic Messerpositionierung - stufenlose Regelung der Materialvorschubgeschwindigkeit - Staubsammler und Abfallbehälter - vollständige Herstellerdokumentation Die Maschine ist in einem einwandfreien technischen Zustand Möglichkeit der Unterstützung bei der Organization des Transports

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 290 mm -recess recess: Ø 268 mm -Hole circle: Ø 168 mm -Through hole: Ø 70 mm Nwodpfx Aeb E N Txoa Eer -Weight: 43.5 kg

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm Nwjdodnaz Nopfx Aa Eor -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg

Condition: used, Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Nwsdpfx Aajx Niv To Esr

Year of construction: 2018, condition: good (used), Foodcons F3000 Wedging and slicing machine 2018, Stainless, multicut slice wedging cutter wedger and slicer, previously used for slicing tomatoes and wedging potatoes and comes with both sets of tooling, great for sliced tomatoes, onions, citrus, potatoes etc, with stainless outfeed conveyor, mobile, 3Ph Nwodpfsx Ebkrsx Aa Ejr