Used Slitting Line for sale (9,375)

Condition: used, Year of construction: 1990, Manufacturer: SALICO S.P.A. Year: 1990 Thicknesses: 3-13.5mm Coil capacity: 25t Coil width:320-1250mm Direction: Left-Right Sizes of line: 17x13m Iajdpfjurlakox Afnsn Maximum external diameter: 2000mm Minimum external diameter: 700mm Minimum internal hole of coil:500mm Maximum internal hole of coils: 600mm Knife diameters: Max 460, Min 410mm Absolute number of cuts 15 Number of cuts with maximum thcikness 13.5mm: 3 cuts for hard material, 5 cuts for mild material.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Iajdpfxjtiy Ntj Afnsn Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support Iajdpfx Aforn Sqhonsn 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: good (used), Slitting line by manufacturer Schmitz. Maximum strip width up to 800 mm. Equipped with a trimming shear. A large number of tools are included. The line has already been dismantled and packed for transport. Technical documentation, electrical diagrams, etc. are available. Iaodpeyiuutsfx Afnon

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- Iaedpfow Dd Igjx Afnsn 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Isdpfxexwc E Is Afnean The system layout PDF is shown as a mirror image!

Condition: ready for operation (used), Year of construction: 2004, For sale is a packaging line, currently still in production and available for inspection under power. The system consists of the following main components: Iaodpfx Aex Sqlusfnon - Bundle loader and tipper by Eich - Integration unit by TITAN - Oiling station by Eich - Steidle - Wrapping station by Böhl - Centering table with gripper by Eich - Stacking area feed by Eich - Shipping preparation by STU - Electrical control system by wpe GmbH - Safety device by Hengstebeck & Eich Technical data: - Max. bundle diameter: 1,500 mm - Max. bundle weight: 6,000 kg - Max. single ring width: 600 mm - Band thickness: 0.1 – 4.0 mm - Stack package weight: 6,000 kg - Stack package height: 1,400 mm including pallet The strapping system is sold including complete documentation and software. Dismantling and transport can be organized by us.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm coil weight: max. 7 t Ioderazyqepfx Afnsan mandrel Ø: 508 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Iasdpfoyi U Ugsx Afnen Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: used, functionality: fully functional, Year of construction: 2015, Cutting and rewinding material: - Galvanized, painted steel and aluminium with thickness from 0.3 to 3.0 mm - Max. input sheet width is 1,550 mm - Strip widths from 32 to 1,550 mm - Line speed up to 50 m/min - Decoiler load capacity: 12,000 kg Maximum coil width: 1,550 mm Coil inner diameter: from 480 mm to 620 mm Mandrel expansion: hydraulic Iaodpfx Afeygrv Ajnen Cut-to-length: up to 3,000 mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 77731, Band Slicing Machine Kronen GS 10 This band slicer with an extended infeed belt from Kronen is ideal for slicing vegetables and fruit. Thanks to the wide range of blades, the machine can cut slices, strips, and cubes. It is also possible to “slice” pulled meat using the specially designed pulled-meat knife. This slicer is highly suitable for salad, (leafy) vegetables, fruit, herbs, meat, fish, sausage, bread, cheese, nuts, and much more. It is ideal for use in large kitchens, catering, fresh-produce specialty shops, and industrial applications. Various cutting accessories are available for a wide range of applications. The easily adjustable control panel allows for quick product changes. Isdpfxjx A Sg Ej Afnsan The belt speed and blade speed are infinitely adjustable (frequency-controlled), enabling even delicate products to be cut effortlessly. This industrial slicing machine is made entirely of stainless steel. Specifications: • Production capacity: 1500 kg/h (depending on product and cut size) • Working width: 125 mm • Cut size: 1 mm – 45 mm • Cutting types: slices, strips, cubes, grating, pulled meat • Included blade: slicing blade 4 mm • Infeed height: 890 mm • Outfeed height: 610 mm • Voltage: 230V (3+N, 50Hz) • Power: 1.8 kW • Weight: 260 kg • Machine dimensions (W x D x H): 2530 × 650 × 1390 mm

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Iajdpfxstn Dij Afnen 20 - 300 x 0,4 - 3,5 mm

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Iodpjgnyglefx Afnjan

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm Iaodpfsgrug Rox Afnjn speed: approx. 60 m/min

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t Iaodpfx Afonfu Icjnsn mandrel Ø: 508 mm No. of slits: max. 9

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm Iaedpolilgcsfx Afnsn No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm Isdpfx Ajlilfbofnsan strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Iaodox R Sk Njpfx Afnsn Year: 2010 Working width: 1250 mm Thickness: up to 1.0 mm Slitting knives: 5 pairs Shearing: circular shears Controller: Siemens SIMATIC panel If you have any further questions, we will be happy to answer.

Condition: used, Year of construction: 2022, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, number of blades: 5, working width: 1,250 mm, FORSTNER SLIT CUT Longitudinal Cutting and Sheet Shearing Line, Year 2022 The machine is in excellent condition and fully operational. It has undergone comprehensive maintenance, and the longitudinal slitting knives have been sharpened. The line is designed for longitudinal slitting and cutting sheets to size. The machine is connected and can be demonstrated. Longitudinal slitting into 6 strips (5 pairs of knives), with the possibility to install up to 7 pairs. Equipped with a modern S1 control system with touchscreen, allowing for easy programming of different lengths and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and performs a perpendicular, clean cut. Integrated material-saving function: the machine stops, raises the cutting knives, and the sheet is automatically fed to the shears. Complete technical documentation included. Specification: Model: FORSTNER SLIT CUT 1250 Iasdex R Tt Sspfx Afnsn Made in: Austria Year: 2022 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Shearing: rotary shears Controller: S1 If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2023, gebraucht 2023 9676 prompt, Zwischenverkauf v Deutschland Iaedewiqrispfx Afnjn 13700 € 1 1250 mm 1.25 mm 1,25 mm bei 1 Messerpaar; 0.37 kW 36 m/min 70 mm 1900 mm 1600 mm 1000 mm 350 kg demo machine / mint condition - fixprice 3 pairs of blades Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN OPTIONS: Additional pair of blades Decoiler

Condition: new, Year of construction: 2026, New slitting and cut-to-length with compact size decoiler. Machine modules: ✔ Decoiler up to 6000kg ✔ Side guides ✔ 5 roller straightener ✔ 5 slitter knives ✔ Polyurethane feed rollers ✔ Mechanical guillotine ✔ 7" Touch panel Machine parameters: • Dimensions L/W/H. - 3.3/1.5/1.2 m, weight 1700 kg Iaodpfxslgy Uhj Afnon • Sheet thickness (cut-to-length) : 0.5-1.2 mm • Sheet thickness (slitting): 0.5-0.8 mm • Max. coil weight: 6000kg • Coil width : 500-1275 mm • Inner coil diameter: 460-520 mm • Steel, galvanized steel and coated steel up to 400N/mm2 • Accuracy : 1mm/2000mm • Power : 3.2 kW Optional: ◦ Additional decoiler ◦ additional slitter knives and guillotine knives ◦ Automaticaly adjustable straightener ◦ Automaticaly adjustable slitter

Condition: new, Year of construction: 2026, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, CUT-TO-LENGTH LINES Thickness: 0.20 mm – 25 mm Width: 300 mm – 2500 mm CRONOSSTECH Cut-to-Length Lines are engineered to deliver high accuracy and stable line performance over a wide range of thicknesses and widths. Each line is technically configured considering the type of material to be processed, thickness range, target production speed, and tolerance requirements. Suitable Materials • Hot-rolled steel Ijdpjykka Usfx Afnean • Cold-rolled steel • Galvanized steel • Aluminum alloys • Pickled materials The systems are designed for materials complying with TSE, DIN, ASTM, JIS, and BS standards. System Configuration Depending on the project, the line may include the following components: • Decoiler • Leveler • Servo measuring and feeding system • Precision cut-to-length unit • Automatic stacking system • Automation and line integration For Technical Evaluation To determine the appropriate capacity and line configuration, please share the following information: • Type of material • Maximum thickness and width • Target line speed • Tolerance expectations • Level of automation Our technical team will evaluate your request and offer the most suitable solution. CRONOSSTECH Engineering-Focused Industrial Systems

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm Iasdpfx Asgnc H Defnen

Condition: new, We can offer you customized sheet metal bending machines (long folding benches) with a working length from 3 m, 4 m, 5 m, 6 m and 8 m Iederdx Uyopfx Afnoan in the material thicknesses 1 mm / 1.5 mm / 2 mm / 3.5 mm and with a depth of 1m or 1.25m (sheet width) Bending angle 145 or 165° Delivery time of the machines - approx. 4 months depending on agreement Matching slitting lines with coil system can also be customized For questions please contact us Currently also few used machines available The offer as well as the example pictures here are for information only and do not include any counter value

Condition: new, Year of construction: 2025, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 4 mm, coil weight: 20,000 kg, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting speed: 90 mm/min, product height (max.): 4 mm, working width: 1,600 mm, type of input current: three-phase, total width: 6,000 mm, total length: 28,000 mm, total height: 2,600 mm, feed roller diameter: 126 mm, operating speed: 60 mm/s, inner diameter: 508 mm, input voltage: 380 V, product width (max.): 1,600 mm, number of feed rollers: 2, number of straightening rollers: 17, power: 145 kW (197.14 HP), RAEDY IN STOCK ---> COIL SLITTING LINES Coil Slitting Line is a machine specially manufactured for slitting master coil in to baby coils. Coil Slitting Lines consist of the following equipment and units; Coil Car / Loading Trolley Decoiler / Uncoiler / Coil Unwinder Strip Transfer Unit Straightener / Leveler Strand Extensioner Leveler Slitting Head witg Slitting Knives Spare Slitting Head and Knives for Quick Change Scrap Recoilers / Winders First Strip Transfer Unit Strip Tension Control Ijdpfx Afeh Dy Iyenjan Separator Units and Parts Coil Rewinder System Coil Extraction and Easy Handling System Exit Car Hydraulic and Pneumatic Systems Electronic Control Panels