Used Spinner Ttc 300 for sale (93)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: AZ0238, turning length: 400 mm, turning diameter: 250 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,400 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, SPINNER TC 300 52 SMCY CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 35 A - Maximum swing diameter: 300 mm - Y-axis travel: +45/-30 mm Bwsdpoyh Iryofx Agzei Spindle 1: - Maximum speed: 5,000 rpm - Spindle power: 15 kW - Torque: 95 Nm Spindle 2: - Maximum speed: 7,000 rpm - Spindle power: 6/7.8 kW - Turret number of tools: 12 - Tool holder: VDI 25 - Including live tools: 12 - Maximum speed: 6,000 rpm - Including chip conveyor Note: The item must be collected on a binding appointment between 01 and 02 April 2026 to be coordinated. FCA D-79115 Freiburg – loaded on truck

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW Bodox Hpyyopfx Agzowi face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock.

Condition: used, Year of construction: 2006, Lot consists of: (1) CNC Lathe Bsdpfx Asym Rlcjgzjwi Technical Details: Lot includes 1 x Spinner CNC lathe, an assortment of tools, and 1 x tool cabinet with contents (contents may vary). Tech. specs of the lathe: Max. turning diameter: 430 mm; distance between centers: 730 mm; Turret capacity: up to 12 driven tools; Control type: Fauc 21 i. The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 16,981 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2013. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1800 x 810 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Table size: 1800 × 810 mm • Maximum workpiece weight: 2000 kg • Spindle torque: 109–1052 Nm • Tool magazine capacity: 24 tools • Tool changer condition: defective • Supply voltage: 400 V • Power supply: 3 / PE • Frequency: 50 / 60 Hz • Rated current (IB): 58 A • Nominal current (IN): 63 A • Hours: 16,981 h Additional equipment Bwedpjypcfmjfx Agzji • Optional 4th axis for 10.000€ Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2020, Technical details: x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Bwjdeyqyfgjpfx Agzoi Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. *

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,520 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 630, number of axes: 5, This 5-axis SPINNER U-1520 was manufactured in 2012. It features a Heidenhain iTNC630 control, a 3D measuring probe, and both internal and air cooling systems. The machine includes an 89-position tool changer with travels of X=1520mm, Y=700mm, and Z=600mm. If you are looking to get high-quality milling capabilities, consider the SPINNER U-1520 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • 58-position tool changer • 3d measuring probe • Internal cooling • Air cooling Bodpfxjx D Hlxs Agzowi Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 35,000 W, controller manufacturer: SIEMENS, controller model: 840D, This 4-axis SPINNER TC 110 was manufactured in 2007. A horizontal turning machine, it offers robust performance for precision tasks. Ideal for those seeking reliable turning capabilities. Contact us for more information. The TC110 has a Profi Bus error caused by a defective itional equipment • Number of Driven Tools: 12 Machine Benefits Bwsdpox D H Aksfx Agzei Technical Machine Benefits • Maximum turning length: 1000 mm • Max turning diameter: 300 mm

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 5,000 rpm, spindle motor power: 24,000 W, total height: 1,990 mm, overall weight: 7,500 kg, controller manufacturer: SIEMENS, controller model: 840D-SL, number of axes: 7, This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Additional equipment Bwjdpfx Agox D Itkszsi • Coolant Tank Volume: Approximately 200 liters • Hydraulic Tank Volume: Approximately 120 liters • Central Lubrication Unit Volume: Approximately 2 liters • Operating Current (IB): 76 A • Rated Current of Protection Device (IN): 80 A Machine Benefits Technical Machine Benefits • Acceleration: 0. 5 g • Spindle nose: a6 type • Chuck diameter: 210 mm • Maximum torque: 151 nm / 115 nm (s3 40% / s1) • Coolant tank volume: approximately 200 liters Extra Information Travel Paths: X1, X3: 180 mm X2: 180 mm Y1, Y3: ±45 mm Z1, Z3: 704 mm Z2: 620 mm E2: 720 mm // Accessories: -4x Tool holders, straight, left-right square mount, external coolant -4x Machine Interface:BT45A Tool Holder:Ø 32 mm Coolant Supply:IK 80 bar Functional Length (LF): 85 mm Overhang Length (LPR): 110 mm Functional Width (WF): 59/21 mm -1x Milling Head: 90° / BMT 45 / Spinner No. 125548 / ER 25 Description: Angled milling head / BMT45 / ESX-25, dual-spindle (right and left) Spinner flat coupling ER25, max. speed: 6000 rpm, i=1:1 Enhanced version with center height of 85 mm -1x Parting Tool Holder Universal rotation direction External coolant supply Dimensions Machine Depth 2880 mm

Condition: good (used), Year of construction: 2015, operating hours: 6,600 h, 1 used machining centre Manufacturer: Spinner Model: VC 750 Year of manufacture: 2015 Control: Heidenhain iTNC 530 Approx. 6,600 spindle hours Travel: X 760 mm Y 460 mm Z 460 mm Clamping table: 900 x 410 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 24 positions Workpiece weight: 350 kg Equipped with: Bwodpfx Aeyngc Togzei Robot automation Heidenhain iTNC 530

Condition: excellent (used), Year of construction: 2019, CNC universal lathe Spinner TC 800L 110MCY Control: Siemens Sinumeric 840D E Year of manufacture: 2019 X-axis travel: 360 mm Y-axis travel: 120 mm Z-axis travel: 1,580 mm Turning diameter: 500 mm Turning length: 1,580 mm Bar capacity: 85 – 175 mm Spindle bore: 110 mm Tool turret: 12 positions Tool holder: BMT65 Accessories: - Tailstock - Heidenhain measuring system - Multifunctional handwheel Bedeyk Txmjpfx Agzswi - Chuck SMW KNCS 325 - SMW hydraulic steady rest - Chip conveyor - High-pressure pump 15 bar - Touch probe - Extraction unit - Tool package

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 12,000 rpm, CNC control Sinumerik 840D NC-swivel-rotary table (B-axis and C-axis) automatic tool changer for 30 tools coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 1520 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 420 mm B-Achse Schwenktisch / B-axis swivel table -90 - +110 ° C-Achse Rundtisch / C-axis rotary table 360 ° Bwsdpfx Aox S Htzogzji NC-Schwenk-Rundtischdurchmesser / NC swivel-rotary table diameter 500 mm Starrtischaufspannfläche / fixed table clamping area 920 x 540 mm Spindelaufnahme / spindle taper SK40 Drehzahl Spindel / spindle speed 12000 Upm /rpm Eilgang / rapid feed 32 m/min Antriebsleistung Spindel / drive capacity spindle 25 kW Gewicht der Maschine ca. / weight 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 15,000 rpm, Fanuc Oi-MD CNC control electronical handwheel 24-fold tool changer coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 450 mm Y-Weg / Y-travel 400 mm Z-Weg / Z-travel 400 mm Spindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 15000 UpM /rpm Eilgang / rapid feed 36 m/min Tischaufspannfläche / table clamping area 770x410 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 16 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Bwedpex Slbwsfx Agzei

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Bwjdpfx Aeym Ncmsgzoi Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Bwodpfx Agjym Ncgszoi Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm Bwjdpjym Ai Hsfx Agzsi E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos are included) External reference: Dürr

Condition: used, Year of construction: 2005, CNC Lathe Manufacturer: Spinner Model: TS66L SMC Year of manufacture: 2005 Control: GE Fanuc 18iTB Travel paths: X/Z: 240 x 640 mm Main spindle up to 4,000 rpm / 66 mm Spindle nose: DIN 55026/A6 Clamping cylinder bore: 66 mm Counter spindle up to 5,000 rpm Spindle nose: DIN 55026/A5 C-axis: On both spindles, including software options "Transmit" for face machining and "Cylindrical interpolation" for peripheral machining C-axis S1 With disc brake for spindle clamping during milling operations Turret: 12 stations Toolholder in accordance with DIN69880/30 mm, radial arrangement 12 driven tools in the turret For milling and drilling operations Hydraulic hollow clamping cylinder on both spindles With continuously adjustable clamping force Electrical interface for bar feeder connection According to SPINNER-UNIMAG standard Spindle flushing on counter spindle TS For coolant flushing through the counter spindle Chip conveyor Full splash guard enclosure Coolant system Work area lighting Pneumatic equipment Leveling elements Bodpfx Aoylk Rcegzjwi 10.4" flat color display / operator panel 1 Documentation available 25226

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. Bsdjykt T Dopfx Agzjwi • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2013, operating hours: 21,000 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D sl, total height: 2,400 mm, total length: 3,400 mm, total width: 2,000 mm, table width: 500 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (min.): 10,000 rpm, spindle speed (max.): 12,000 rpm, tool weight: 7 g, Equipment: chip conveyor, manual digital 3D probe; chip conveyor: yes IKZ: no / preparation available Tool holder: SK 40 DIN 69871 Tool changer: 32 positions Control: Equipped with ShopMill Machine weight: approx. 9,200 kg Dimensions (L x W x H): approx. 3,400 x 2,300 x 2,800 mm (base machine) Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and proper installation – all from a single source. Billing according to individual terms and runtime. Contact us for your personal quote. Bwjdpoyml Ilsfx Agzsi

Condition: ready for operation (used), Year of construction: 1996, Make: SPINNER Type of machine: TC 65 Bsdpfsxg Td Hox Agzewi Year of manufacture: 1996 Control system: Siemens 820 T Machine's weight: 4,5 t Tool holder: VDI 20 x-travel: 200mm z-travel: 500mm Speed range: 4000 1/min Overall dimensions: 1,7 x 2,2 x 1,7 m Tool turret - slots: 16 Pl. C-axis: 0,001 Grad Spindle opening: 65 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Bwedeyifm Djpfx Agzji Taper Size SK 40

Condition: new, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: UT1809, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Machining Center U-1530 Advanced Travel distances: X = 1530 mm, Y = 530 mm, Z = 465 mm Linear guides on all three axes High-precision MILLING SPINDLE up to 12,000 rpm / 22 kW / 120 Nm (10% duty cycle) In-line spindle with direct drive, beltless / SK40 Automatic SPINDLE AIR SEAL SHUTOFF TOOL MAGAZINE with 54 tool stations 2-axis ROTARY-TILT TABLE D=650 mm in PRECISION DESIGN "T" with counter bearing at the front of the table console (supported on both sides). Table rotary diameter: 650 mm -> High table load capacity: 500 kg -> Swivel range: B = -90° (-50°)/+110° DIRECT MEASURING SYSTEM on B and C axes HYDRAULIC BRAKE for tilt axis B and rotary axis C FIXED TABLE left in the work area U-1530, can be saddled at two levels DIRECT MEASURING SYSTEMS on X/Y/Z axes Bwjdpfxjrtpmhj Agzei SIEMENS 840D Control with the following standard features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for optimal ergonomics - Incl. engraving cycles - 24" LCD color flat-screen with multi-touch functionality - 2 GB user memory - 15 zero point shifts - 1 free USB interface - Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on the control panel -> All major setup operating functions integrated into one multifunctional handwheel SHOPMILL step programming, 3D SIMULATION, REST MATERIAL DETECTION, DXF reader, LIVE PLOTTING of machining process Energy-saving function including automatic machine shut-down Multi-axis interpolation > 4 axes - "TRAORI" 5-axis transformation with tool orientation - 5-axis tool length compensation - Tool retraction on interruption - RTCP swivel axis manual operation Cycle 996 for KINEMATICS MEASUREMENT "ADVANCED SURFACE" for surface quality optimization "SPLINE INTERPOLATION" for reduced machining times (depending on raw data) 2 GB additional user memory PROBE FUNCTIONS for integration of a measuring probe UNIVERSAL CHIP CONVEYOR SPINDLE PREPARATION FOR HIGH PRESSURE HIGH PRESSURE TANK 70 bar with paper band filter Blow air at spindle head Central compressed air via milling spindle Cleaning gun in machining area PREPARATION for SPINNER STANDARD MEASURING PROBE with receiver unit STANDARD DOCUMENTATION in digital form on the control unit LIFTING EYES for crane unloading STANDARD PAINT two-tone, light grey RAL7035 and blue-grey RAL5008 PACKAGING Notes: The price includes warranty services only within Germany. For new and demo machines, the photos shown are not necessarily of the individual machine but of comparable models. Accessories such as clamping devices or tool holders are included only as listed in the technical description. Please request a detailed ex-works offer. Visit our plant near Munich or one of our showrooms. We may have additional offers for similar machines. Interim sale is expressly reserved.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,013 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, table length: 1,100 mm, table width: 560 mm, controller model: 840d SL ShopMill Operate, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Bjdpot Sftwefx Agzswi Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 35,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis SPINNER TC 77 was manufactured in 2007. A robust horizontal turning machine, it offers precision and reliability for various turning applications. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 77 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Turning length: 1500 mm • Max. Turning diameter: 300 mm • Jaw chuck diameter: 250 mm Bjdpex D H Rzjfx Agzswi • Spindle passage: 77 mm • Number of driven tools: max. 12 Extra Information Machine still under power

Year of construction: 2004, condition: ready for operation (used), Technical data: working area: turning diameter max.: 300mm, travel X/Y: max. 200mm/350mm, chuck diameter: 125mm, distance between centers: approx. 300mm, speed range: 40-5000rpm, spindle nose: A2-4, tool holder: VDI16, CNC control: FANUC Series 18i-TB, installation dimensions X/Y/Z: approx. 1800mm/1300mm/1700mm, machine weight: approx. 2200kg. Inspection is possible by arrangement. Bjdpfeylbufsx Agzewi

Year of construction: 2005, condition: ready for operation (used), Technical data: travel X/Y: 350mm/200mm, turning diameter max.: 300mm, swing diameter max.: approx. 400mm, clamping system: type E185, speed range: 40-6000rpm, tool holder: VDI30, 8-station turret, installation dimensions X/Y/Z: approx. 2200mm/1600mm/1750mm, machine weight: approx. 3500kg. Inspection possible by arrangement. Bsdpfoylbuljx Agzswi