Used Spherical Reamer for sale (165)

Condition: used, mileage: 722,540 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle equipment and technical details: General information: * Chassis type: S 500 A4x2EB * VIN code: YS2S4X20005553872 * Maximum permissible gross vehicle weight: 18 tons ---- Technical data: * Product class: Truck * Wheel configuration: 4x2 * Wheelbase: 3600 mm * Chassis width: 2600 mm * Chassis height: extra low * Front axle load, technical: 7500 kg * Rear axle load, technical: 11500 kg * GVW, legal: 18,000 kg * GVW, technical: 44,000 kg * Maximum permissible gross vehicle weight, technical: 19,000 kg * Emission level: Euro 6 * Engine: DC13 155/500 hp, 368 kW (500 hp), displacement: 13 liters * Transmission: GRS905R, Opticruise, TMS2 * Retarder: Scania R3500 * Front axle tire size: 355/50 R22.5 * Rear axle tire size: 295/60 R22.5 Bsdpjyv Uh Isfx Aa Iodh * Rim material: Aluminum * Front axle rim type: 22.5x11.75 Aluminum Alcoa DuraBright * Rear axle rim type: 22.5x9.00 Aluminum Alcoa DuraBright * Braking system: EBS7, electronic, ABS/EBS: 4S/4M * Hill hold: available * Air tank capacity: front 70 dm³, rear 30 dm³ * Suspension system: Air suspension front and rear, extra low air suspension height front * Leveling system: fast, truck and trailer * Steering gear: ZF 8098, ratio: 17-20:1, adjustable steering wheel (tilt + slide) * Speed limiter: 89 km/h (legal 90 km/h) ---- Cab: * Type: CS, length: 20 dm, roof height: high * Color: Ebony Black * Windshield: tinted, with rain sensor * Air conditioning: automatic, with auxiliary heater (WTA cab heater 3 kW) * Sunroof: electric * Cab mounting: Air Comfort * Driver and passenger seat: Premium, leather black, driver's seat with adjustable backrest and seat ventilation * Lower bunk: extendable from 800 to 1,000 mm, mattress: pocket spring * Upper bunk: width 700 mm, with safety net * Bluetooth: available * Navigation: with topographical map data for Europe * Audio system: AUS4 * USB ports: dashboard, passenger side, driver and passenger side, rear wall * Headlights: LED, fog lights: LED (3 diodes), daytime running lights: LED * Rearview mirrors: electrically adjustable and heated, spherical, driver/passenger side * Storage compartments: driver/passenger side, refrigerator box rear lower on driver's side, drawer rear lower passenger side ---- Additional equipment: * Fifth wheel coupling: +GF+ SK-S36.20 2/128, position: -510 mm * Mounting plate: 22 mm, D-value max 152 kN * Rear splash guard: plastic, length 96 mm * Spray suppression device according to EU 109/2011: included * Front mirror: electrically adjustable and heated * Horn: compressed air 118 dBA * Trailer brake coupling: ISO type, 1x15-pin connector ---- Certificates: * Advanced Emergency Braking: E4 - 131R - 010008 EXT.05 * Lane Departure Warning System (LDWS): E4 - 130R - 000010 EXT.04 * Speed Limiter: E4 - 89R - 000069 EXT.13 ---- * Front axle tire dimension: 355/50R22.5 * Rear axle tire dimension: 295/60R22.5 * Fuel tank: 450 + 450 liters * AdBlue tank: 96 liters * Technical total weight: 19000 kg * Tare weight: 8227 kg * Permissible trailer load: 26470 kg * Total length: 5810 mm * Wheelbase: 3600 mm * Next inspection due: 07.2027 * Engine operating hours: 12513 hours ---- Vehicle number: 11934 ---- Errors and prior sale excepted ---- Advertisements and various lettering have been digitally removed. ---- We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you, for an additional fee...

Condition: used, Rolling bearings, ball bearings, SKF bearings, SKF, spherical bearings, roller bearings -Type: 24056 CC/ W33 -Lubricating groove -Bore: Ø 280 mm -Outer diameter: 420 mm Bsdpfxsd Nw H Ae Aa Ijdh -Width: 140 mm -Weight: 74 kg

Year of construction: 2006, condition: ready for operation (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,100 mm, overall weight: 80,000 kg, spindle motor power: 40,000 W, spindle speed (max.): 3,000 rpm, table load: 30,000 kg, number of axes: 5, This 5-axis Zayer FP-10000 Bed Type Milling Machine was manufactured in 2006. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 4,200 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 10,000 × 3,000 mm and a maximum table load of 30,000 kg. If you are looking to get high-quality milling capabilities, consider the Zayer FP-10000 machine we have for sale. Contact us for further details. • Table size: 10,000 × 3,000 mm • Distance between columns: 3,500 mm • Table-to-direct-output-head nose distance: 2,000 mm • Table-to-45° head nose distance: 1,298 mm • Rapid traverse X/Y/Z: 10,000 mm/min • Working feed X/Y/Z: 6,000 mm/min • Universal 45° head speed: 3,000 rpm • Direct-output head speed: 3,000 rpm • Automatic TWIST head speed: 3,000 rpm • Speed ranges: 2 • Number of heads: 3 • Hydraulic tool clamping: Included • Manual head change: Included • Portable handwheel: HR-410 • Motors: Siemens • Machine condition: Excellent Additional equipment • Universal 45° head, 3,000 rpm • Automatic spherical head • Continuous rotation in both bodies • Manual retractable support on the right side Bedpfx Asz D Az Tja Isdh Technical Specification Taper Size ISO 50

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) Bdjdpfxevi Enao Aa Ieh KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Bedpfx Aezq E Hbja Ijdh Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Kinshofer Pallet Clamp / Block Stacking Clamp / KM 332 V – 1100 / NEW Price: €8,790.00 net / €10,460.10 gross Insertion depth (mm): 1,100 – 1,650 Load capacity at min./max. insertion depth (kg): 1,900 / 1,350 Opening width A min./max. (mm): 400 – 1,400 Height (without motor) (mm): 1,315 – 1,865 Weight (without clamping rails) (kg): 340 Operating pressure at flow rate: 20 – 26 MPa (200 – 260 bar) at max. 75 l/min and 20 – 37 MPa (200 – 370 bar) at max. 40 l/min The technically advanced KM 332 block stacking clamp offers versatile usage for both palletized and non-palletized building materials. - Fixed or adjustable insertion depth with hydraulically operated parallel opening and closing grab arms. - Versatile application thanks to opening widths from 400 mm to 1,400 mm, ideal for loading single concrete elements such as kerbstones as well as complete brick packs. - Adjustable insertion depths – perfect for loads with varying heights. - Synchronisation of the grab arms by two hydraulic cylinders, interconnected via a differential system. - Safety ensured by an overpressure valve in the hydraulic system to protect against overload. A check valve prevents release of the clamped package, even in the event of pressure loss in the carrier. - Durability thanks to generously sized bearings, integrated lubrication reservoir, automatic main bearing wear compensation, and spherical central cylinder mounting. We have a large selection of various attachments immediately available from stock! Bodpfx Aaoyfm Ecs Iedh Mr. Herden (Tel.) will be happy to assist you. On request, we are pleased to provide you with a tailored financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Subject to prior sale and errors excepted! = Further Information = New: Yes Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, overall weight: 8,000 kg, JUNKERS FLUTEMAT: a CNC machine for highly flexible groove grinding. The FLUTEMAT is the perfect machine for creating grooves in various tool types. For example: • Application: Grinding 3 or 4 chip and flute grooves in HSS taps, milling cutters, and reamers. • Workpiece diameter: Diameter from 2 to 16 mm. Bdodpfjzya Hhox Aa Ieh • Clamping system: The thread tool is precisely fixed in a square clamping device and the tailstock center. • In-process dressing: A CNC-controlled dressing unit is located directly behind the grinding spindle. • Enormous speed: a cycle time of approx. 75 seconds for an M12 HSS tap. • Design: The machine features a vibration-damping machine bed made of mineral cast. • Control: Modern control technology via the company's own Erwin Junker Operator Panel (EJ-OP). • Grinding media: Extremely durable CBN or diamond grinding wheels are used. • Manufacturer: Erwin Junker Maschinenfabrik GmbH • Model: FLUTEMAT • Year of manufacture: e.g. 2006 • Control: CNC Junker Operator Panel, e.g. Siemens Sinumerik • Workpiece diameter range: approx. 2 – 16 mm • Total workpiece length: Max. e.g. 150 mm • Number of grooves: 3- or 4-groove tools (straight and helical grooves) • Grinding spindle drive: e.g. 7.5 kW / 11 kW • Grinding media: Designed for CBN and diamond grinding wheels • Dressing unit: Integrated, CNC-controlled in-process dressing unit • Machine bed: Vibration-damping mineral cast • Included accessories: Oil mist extraction, • Coolant system • Robot cell with various clamping tables, • Various grinding wheel flanges, • Documentation/manuals. For more information? For example, a VIDEO is available upon request by email.

Condition: good (used), Year of construction: 1986, SOE reamer grinding machine with projection measuring device. Accessories: collets, various grinding wheels. In good, operational condition. Bdjdpfxjy Tuhvj Aa Ish

Condition: good (used), Roller bearings, ball bearings, spherical bearings, bearings, rolling bearings, spherical bearings, spherical roller bearings, cylindrical roller bearings -Spherical roller bearings: Roller bearings with lubrication groove -Type: 22322 -Bore: Ø 110 mm -Outer diameter: 240 mm -Width: 80 mm Bdjdpfxog A U Nrs Aa Ijh -Weight: 17 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 17 h, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 Bsdpfoyap Uiox Aa Isdh • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos Bedpfxjb A Razo Aa Isdh -Sale: only complete set -Weight: 40 kg

Condition: good (used), Year of construction: 1975, overall weight: 6,000 kg, total width: 1,800 mm, total length: 5,000 mm, total height: 2,900 mm, sheet thickness (max.): 12 mm, Flanging and dishing machine Schleiffstein - KbOL 3012 Tank Head Manufacturing  Dishing and Flanging machine up to 12 mm in 260 Nm/mm2 Forming roll optional for sale Radius 50 / 70 / 100 / 150 / 200 / 250 / 300 Fully hydraulic machine Bodpfx Aajzz Ipge Iodh Field off aplication heads, bottoms for vessel, tanks, beverage manufacturing tanks, beer tanks Torispherical heads Ellipsoidal heads Spherical bottoms Dished bottem tank construction Flat bottems Sperical dished bottoms Cones     Max. workpiece: 6500Ø Maximum sheet thickness: 12mm Max. dishing radius: 300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 50mm Max height on dishing side:350mm Working speed: 0 - 5000mm/min. Power: 20kW Length: 5000mm Width: 1800mm Height: 2900mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Version: cc/w33 -d= Inside: 220 -D = Outside: 340 -B = Width: 90 Bodpfx Ajb A Imwoa Isdh -Weight: 30 kg

Condition: good (used), Here we offer you a Stäubli robot. Stäubli robot with control unit and operating panel. The Stäubli RX130 is a fast and precise medium payload robot (max. 12 kg) with a maximum arm reach of 1360 mm. It is suitable for machine tending, painting, cleanroom, life sciences, and pharmaceutical applications. The RX130 robot is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom for maximum flexibility. The spherical working envelope of the robot enables optimized use of the robot cell. It can be mounted on the floor or ceiling. The 6-axis RX130 offers high-resolution servos with absolute calibration and a fully enclosed structure, ideal for applications in harsh environments. Bedezdittspfx Aa Ijdh 3x400V-50/60Hz-5500VA Weight 260kg Type: Stäubli CS7 RX130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed via email or fax.

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). Bdsdpfxezxhggj Aa Ijh For sharpening milling cutters, drills, reamers, and tools. 380V Three-phase – In good condition. Video available upon request.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (est. 1932) - Model: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of manufacture: 1990 - Electrical diagram no.: UWIA-0-161A CONDITION Very good, well-maintained overall condition. Fully functional, tested and ready for operation. Shows normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID no. 229 328 01 - Made in West Germany GRINDING SPINDLE DRIVE DATA - Motor type KK 5 S (3~) - 0.37 kW, 2800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2100 / 3000 / 4200 / 6000 rpm (4-step) WORKPIECE SPINDLE DRIVE DATA - Georgii-Kobold motor KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1400 / 2800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (GENERAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current of the machine: 2.8 A - Circuit protection rated current: 10 A Bodpfx Aey Er Ahea Iedh EQUIPMENT & FEATURES - Swiveling worktable ±90° - Tailstock - Workpiece spindle with separate drive - Grinding spindle head with 4 speeds - Heidenhain VRZ 710 digital display (2 axes) - Tool cabinet including approx. 15 CBN grinding wheels - Machine is mobile on 4 castors APPLICATION Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools, as well as round and flat profiles. Ideal for grinding shops, tool making, and maintenance. LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Collection in person or freight shipping by arrangement. Transport costs on request (depending on delivery address). All information without guarantee. Subject to errors and misprints.

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler Bedpfxozv Sbie Aa Ijdh - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Bdjdpfx Aoyx U N Dsa Ieh Please contact us for further information. Price on request!

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Bdedezrux Aopfx Aa Ioh Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available.

Condition: used, Year of construction: 1998, functionality: fully functional, R-500 reamer, complete with: Bjdpfez D Ayijx Aa Iodh 3 – 1/4 – 3/8 – 7/16 inch reaming heads Hook attachment device

Condition: good (used), Machine reamers, reamer, reaming tool, fitting knife cutting set -Machine reamer: Shell reamer with holder -Diameter: Ø 26 mm -Shaft diameter: Ø 16 mm Bedpfx Aasucahve Ijdh -Total dimensions: Ø 25 x 120 mm -Weight: 0.3 kg

Year of construction: 2020, condition: used, Six identical Rodenstock DNEye Scanner 2+ units are available, five of them available from January 2027, printer: black-and-white printer, screen type: TFT LCD touchscreen, screen size: 10in, WSVGA, 1024x600pixels, spherical measurement range: -20dpt to +20dpt at 12mm vertex distance, cylinder range: 0-8dpt, axis: 0-180°, pupil measurement range: 2-7mm, 3 zones, number of measurement points: 1,400points at 7mm pupil, measurement method: Shack-Hartmann, number of rings: 24, number of measurement points: 6,144, number of analyzed points: 100,000, diopter range: 37.5-56dpt, reproducibility: 0.03mm, method: Placido disc/keratoscope, measurement wavelength: 455nm, no UV light, measurement range: 150-1300µm, precision: under 5µm, method: static Scheimpflug camera, measurement wavelength: 850nm, method: retroillumination, calibrated range: 7-50mmHg, precision: ±2mmHg, length: 530mm, width: 312mm, height: 570mm, weight: 25kg, with documentation. An on-site inspection is possible. Bdjdpfxjz Eudcs Aa Ieh

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Bedpfx Aajuy Ribo Isdh Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Bearing type: Spherical roller bearing -Bore: Ø 160 mm -Outer diameter: 340 mm -Width: 114 mm -Weight: 50 kg -No sales by weight Bdsdpfx Aeb A Ip Dsa Ish

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Bdodpfxjyy Hgqj Aa Ieh Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence