5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gear type: SK01-R1000-/1/L/4
-Motor power: 0.37 kW
-Speed range: 33-165 rpm
-Motor: adjustable
-height of the shaft axis: 100 mm
-Construction: B3
-Drive shaft: Ø 20 mm
Ukun7zxzz
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 505/320/H195 mm
-Weight: 23 kg
3
Load capacity: 60.000 kg; Gripper: 2005 - 4500 mm
F90feg2
15
3
diameter 4-29 mm
length 50-300 mm
tool adaptor MK
- different manufacturer, sizes and types available.
Btttqjg7ih
price: 1 Euro per mm diameter.
8 H7-->8 Euro/piece
12 H7 -->12 Euro/piece
.
29 H9 -->29 Euro/piece
2
HM adjustable groove cutter LEITZ 20627 4-7,5mm
very good condition, as good as new
diameter 150mm
the cutter is infinitely variable from 4mm - 7,5mm
for 30mm spindle or holder
can mill approx. 25mm deep
for speeds up to 9000 rpm
for manual feed, with BG-test
with the milling cutter you can mill grooves from 4mm to 7,5mm up to 25mm deep
the cutting edges are OK and sharpened, without gaps or breakouts
Fyup8xkr
with large resharpening zone, the cutter can be resharpened several times
was used onl...
3
adjustable microscope for ESKOMATIC D6
Bzo9ypfc3k
5
adjustable gear motor, variable speed gear motor, electric motor
Lxbsb
-Manufacturer variable speed gear unit SEW type: D14DT80K-6TF
-Motor power: 0.37 kW
-Speed range: 235-1157 rpm
-Motor: adjustable
-height of the shaft axis: 130 mm
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 19 mm
-Dimensions: 480/273/H240 mm
-Weight: 25 kg
2
No. 449
second hand
Make Stehle
Dimensions 150 mm x 4-14 mm x 30 mm
Pquw7
HM
BG test
Circle diameter approx. 150 mm
Hole about 30 mm
Groove width adjustable approx. 4-14 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
6
4 pieces adjustable clamping jaws for faceplate
lathe chuck, mechanical clamping device, clamping block
Chuck jaws
jaw width 100 mm
Pprnh
Jaw length 300 mm
jaw height 142 mm
- Step jaws for turning as turning and drilling jaws
- Jaw adjustment via trapezoidal thread spindle
- Jaw carrier with 6 bores Ø 33 mm and 36 mm guide groove
- Jaw carrier bore spacing 140 / 140 x 220 mm
Dimension L x W x H 450 x 300 x 280 mm
Weight per jaw 100 kg
weight all 4 jaws 400 kg
good condition
15
4
Transnorm inclined roller conveyor 3130-840-1180
RA1865
Make: Transnorm
Roller width (RB): 840 mm
Nominal/outer width (NB): 1180 mm
Length: 3130mm
Diameter rollers: 50 mm
Distance between rollers: 55 mm
Roller conveyor motor: SEW drive motor
Bx9qeat3ji
frame height: 210
410 mm side guide with 200mm belt conveyor included
Conveyor speed: freely adjustable with frequency converter
Optionally available:
Supports: 70,00 Euro p. piece plus VAT.
frequency converter for the two SEW motors:500 E...
15
Welding rotary table Air Liquide 2,5 tons
hydraulically height adjustable
with hand and foot remote control
speed infinitely variable with digital display
Cjtx899us
like new
Weight 1750 Kg
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer gearbox Lenze type: 11.112.02.10
-Manufacturer Motor Lenze type: 4AP71-8
-Motor power: 0.12 kW
-Speed range: 1.5-9 rpm
Klnhem0b
-Motor: adjustable
-Construction: B3
-height of the shaft axis: 100 mm
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 25 mm
-Dimensions: 660/200/H210 mm
-Weight: 18 kg
1
No. 450
second hand
Make Stehle
HM
permanently equipped
BG test
Flight circle diameter approx. 150 mm
Hole approx. 30 mm
Pqk27
Groove width adjustable approx. 4 - 7.5 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
3
- Load capacity rotating stand: 1.000 kg
- Machine body: Sheet metal construction made of quality steel,
- length/width 1.000mm x 1.180mm
Htkphkj9c
- height 2.220mm
- Stroke face plate (vertical): 700-1.400mm
- diameter of face plate: 600 mm
- Chuck: M-WPS500
- Machine weight (DSH): 1,400 kg
- Face plate speed: 0.1- 2 rpm
Operation
on the control cabinet: Selector switch: Turn foot switch or
Button on the control cabinet
Turn: LEFT/RIGHT
Lift: UP/DOWN)
Potentiometer for infin...
1
Adjustable 2 - locker Balasubramanian cutterhead Fabr. VICTORY hole and SCHNIEDER type V1302
22594 Fabr.# year 1994
Technical data:
Drilling capacity ST 50 13 mm
KL. 34 mm
Speed 1:1
Erl Spindle Center distance 130 mm
with
-Clamping tongs recording
-Mounting flange
Bzt3fab
used, in very good condition
6
Transnorm adjustable inclined roller conveyor 3500-950-900
RA1864
Make: Transnorm
Roller width (RB): 900 mm
Nominal/outer width (NB): 950 mm
Length: 3500mm
Diameter rollers: 50 mm
Distance between rollers: 54 mm
Roller conveyor motor: SEW drive motor with frequency converter
frame height: 145
410 mm side guides included
The roller angle is easily and quickly adjustable between 6° and 10° with an adjusting screw
Conveyor speed: freely adjustable with frequency converter
Optionally availab...
10
600 Kg load capacity 1000 Kg load capacity
Welding rotary table adjustable in height
with through hole 100 - 200mm
plate diameter 700mm 900mm
Height horizontal min. 0,65m, max. 1,25m
height tilted min. 0,45m, max. 0,95m
speed from 0,01 - 1,1 rpm
Ppjaf
Tilt up to 135
hand and foot remote control with speed indicator
very robust
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer gearbox Lenze type: 11.431.10.08.1
-Manufacturer motor EMOD type: EEDF71L/6
-Motor power: 0.25 kW
Ukuq7fqcd
-Speed range: 8.1-43 rpm
-Motor: adjustable
-height of the shaft axis: 80 mm
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 20 mm
-Dimensions: 380/330/H140 mm
-Weight: 16 kg
2
No. 480
screwed to the socket including intermediate rings
second hand
Dimensions 150 mm x 7.0-13.0 mm x 40 mm
mechanical feed
Pv3jxu
Circle diameter 150 mm
Hole approx. 40 mm
Blade width approx. 6.5 mm x 2 mm
Groove width adjustable approx. 7 - 13 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
11
Capper / lid press for pressing lids (snap caps) on sealed cans. Stacks put manually on feeder of machine. When the rim of the container engages the lid, it enters a power overhead belt compression section within the lid press machine. The lid is gently pressed and sealed into place, as long as it is perfectly aligned with the grooves.
Byp8hljpws
Height-adjustable work bench with parallel blocks, make "Factory floor" with various interchangeable JAWS
Rotatable, table size: 650 x 650 mm
Height: 750-1200 mm
Bcwdngpjqz
Vise
Jaw width: 130 mm
Wingspan: 150 mm
5
Pressure capacity 50 t
table size L x W 650 x 515 mm
Drgvbgn2
drop-through hole Ø 230 mm
throat 250 mm
stroke adjustable 8 - 120 mm
Stroke rate 100 / min
ram adjustability 70 mm
Drive power 2,2 kW
dimensions L x W x H 1100 x 1400 x 2220 mm
Weight approx. 3000 kg
Accessories / special features:
- Adjustable table
- Foot release
This eccentric press is only approved for safe tools or fixed shielding.
Siegfried Volz Machine Tools
Rüschebrinkstr. 151 - 153
D - 44143 Dortmund - Wambel
15
Welding rotary table height adjustable 6 tons load capacity
Dmly7ht
Complete set with hand and foot remote control
Welding current transmission 600 Ampere
Speed 0.01 to approx. 1.1 rpm
Height tilted min. 1000 mm
Height tilted max. 1950 mm
Height horizontal min. 1025 mm
Height horizontal max. 2015 mm
Length 3000 mm
Width 1950 mm
1A condition
several turntables of the same type are available:
- 2 x TC 2
- 1 x TC 3
- 2 x TC 4
5
adjustable gear motor, variable speed gear motor, electric motor
U0lpb82vw
-Motor power: 0.25 kW
-Speed range: 7.5-36 rpm
-Motor: adjustable
-Construction: B3
-Drive shaft: Ø 25 mm
-Protection class: IP 54
-Dimensions: 650/195/H275 mm
-Weight: 33 kg
2
Make Guhdo
used, great condition
HM
permanently equipped
Dimensions 250 mm x 10.2 - 20 mm x 30 mm
Brgiupohd8
Number of cutting edges 4/8 pieces
Pre-cutter 4/8 pieces
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
6
Hydraulic notching machine make BOSCHERT type K 30-180/ CNC
year of construction 1989
for notching all angles from 30° to 180
technical data:
cutting capacity steel ST 40 4 mm
Cutting capacity stainless steel 3 mm
Blade length 200 mm
Cutting length 200 x 200 mm
Cutting angle adjustable 30 - 180
table height 900 mm
electrical connected load 8 KVA
hydraulic oil filling 30 litres
outer dimensions L x W x H 1500 x 1000 x 1930 mm
weight 1950 kg
without stop
with
- control PC 2000 for setting the cutt...
3
2 T - grooves in the table 30° - 140°
2 side stops with scale and groove for attachable back stop
Cutting depth adjustable
Knife for stainless steel built in
Foot switch
Selector switch for single step or step by step operation
2 mechanical hold-downs
Bu2a0froqp
Cutting gap adjustment automatic
Knife length (mm) 220
Cutting capacity R = 42Kg/mm2 6,5
Cutting capacity: R = 60Kg/mm2 5
Strokes/minute: at max. length 50
Strokes/minute: at 50 mm cut 80
Working height (mm) 900
Oil tank capacity 35
Engi...
3
Positioner ABB IRBP 2000L
Handling capacity 2000kg
Two head units ( motor/gearbox/plate/stand) available
One ( 1pcs) adjustable tailstock available.
By8vfzl8c0
Adjustable L= 2800mm
15
Welding turntable hydraulic height adjustable, 10 tons load capacity
Condition as new, little used
rotation speed 0 - 0,6 U/min
Gwu7dg
tilt angle 0 - 135 °
height adjustment min. 1100mm - max. 2300mm
table diameter 2000mm
motor drive 3 KW
Welding ground connection 1000 Ampere
Self-locking gear, no running forward or backward with eccentric load
Speed control with frequency converter
Heavy compact construction, high stability
CE certified
External hydraulic unit and control cabinet,
can be instal...
5
adjustable gear motor, variable speed gear motor, electric motor
-Motor power: 0.55 kW
-Speed range: 8-72 rpm
-Motor: adjustable
Lw9w9
-Drive shaft: Ø 22 mm
-Protection class: IP 44
-Price: per piece
-Number: 1x available
-Dimensions: 650/203/H220 mm
-Weight: 30 kg
6
Adjustable log house cutter from Krüsi 230mm /41-80mm/30 -2 pcs .
Cxszcw8qs
Aluminium .
9
Assembly table with adjustable support bars COMALL JOB 15/2000, new
Technical specifications:
- Contact surfaces in semi-rigid gray PVC
- Loading: 180 Kg
- Four length wise sliding supporting bars, clamping system through handle
- Pneumatic system with two pneumatic connections
- Hardware boxes, 6 pcs.
- Extensible support, equipped with two longitudinal sliding bars
Crubibt3
10
Length: 1400mm
Width: 80mm
U0ejh9wf
Adjustable distance between the strips: 0 - 140 mm
Manual height adjustment. max: 1500mm
0.55kW, 2.68A
Stainless steel design.
Purchase and purchase of industrial equipment and machines.
Large selection of used machines, industrial equipment.
7
This is an underframe for the ivario 2-xs of the premium manufacturer Rational.
The underframe is new, unused, no longer in its original packaging.
This electrically height-adjustable base (up to 200mm) allows an ergonomic working height. Easy to operate via the device display.
Integrated pull-outs for placing containers, for easy crucible emptying.
The RRP. is: 2.540 € net
The indicated price is net, plus 19% VAT.
Service:
We are happy to arrange a certified Rational customer service from a mas...
10
Protec KT 3000 HV, Hydraulically height adjustable
Load 3000 KG
Manual remote control with digital display
Double foot remote control
Height approx. min. 700mm horizontal, height max. 1400mm
Diameter face plate 1400mm
Angle of inclination min. 135
Speed 0,05 to 0,6 U/min.
Motor power 3 KW
Vvlhq0w
5
adjustable gear motor, variable speed gear motor, electric motor
U0lroiiv8
-Motor manufacturer SEW type: RF53V D 80 N-6 RK
-Gearbox manufacturer SEW type: RF53 RK1
-Motor power: 0.55 kW
-Speed range adjustable: 4.4-26 rpm
-Construction: B5
-Drive shaft: Ø 30 mm
-Protection class: IP 44
-Dimensions: 580/400/H210 mm
-Weight: 41 kg
1
all stainless steel turn table
diameter 1.250 mm
adjustable height 820 – 910 mm
safety guard (height 10 mm)
adjustable speed (2-7 rpm)
0,12 kW
Bftuhixsxa
15
S&S Machines GmbH
Sale - Renting - Spare parts service
We offer:
3fm29mq
Mini excavator Bobcat E20
weight approx. 2019 kg
year of construction 2015
Operating hours approx.2764
Hydraulic quick coupler
clearing bucket
Backhoe bucket
Fast gear
Auxiliary hydraulics DW on joystick
Adjustable undercarriage
UVV against surcharge New
Immediately ready for use machine
Additional accessories such as hydraulic hammer, sorting grab, Powertilt etc. available at extra cost
Trade-in of your old machine possib...
3
Liftsmart Spreading beams, lifting beam with adjustable hoisting keys Capacity 5000 kg length 3 meters Directly available or detachable. Features: including certificate and manual CE marking. Clear capacity indication. Length 3 meters in adjustable standard color signal yellow. Adjustable by means of adjustable hooks. extra stop points possible at extra cost. 1 ton 550,00 2 ton 600,00 3 ton 695,00 5 ton 850,00 For more information or customization please contact our sales department:
Dmou...
1
Adjustable portal crane, 1-ton exclusive chain hoist and trolley Max lifting capacity 1 Ton Height Min: +/- 240 Cm Height Max: +/- 360 Cm Width outside: +/- 250 Cm Weight: +/- 117 Kg Packing size 229 x 52 x 21 Cm 567.49 including VAT (almost always in stock) chain hoist and trolley also deliverable (normally also in stock) Monday to Friday available from 9:00 to 23:00 Saturday from 9:00 to 18:00 outside these times only by e-mail Handelsonderneming Dekkers Wijk en Aalburg (nb) tel. bgg.
Otl2h
14
Welding rotary table height adjustable 4,5 tons load capacity
Complete set with hand remote control
Welding current transmission 600 Ampere
Height tilted min. 870 mm
Height tilted max. 1690 mm
Height horizontal min. 1095 mm
Height horizontal max. 1915 mm
1A condition
attention clamping plate surcharge 1500.-€
there are several turntables of the same type available:
B98b8hg
Prices depend on age and condition, please ask.
- 2 x TC 2
- 3 x TC 3
- 2 x TC 4
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4
-Manufacturer Motor Dietz type: DR80/b/4n
-Motor power: 0.75 kW
-Speed range: 12-67 rpm
-Motor: adjustable
-height of the shaft axis: 120 mm
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 25 mm
-Dimensions: 415/200/H400 mm
-Weight: 35 kg
Pehzdpc2
5
for sale 1 piece:
adjustable gear motor, 0,37 kW 0,9 – 4,7 r/min, Getriebebau-Nord 32/12-R100U
brand: Getriebebau Nord
type: 32/12-R100U-71 L/4
new with traces of storage, checked, ready to use
2 units at stock
characteristics:
motor rotary current: 400 V
performance: 0,37 KW
speed: 0,9 - 4,7 r/min adjustable
shaft diameter: information asap
weight: information asap
3nnavivw0
shipping:
Shipping worldwide. Please contact us for further shipping details for your desired location...