GEHRING 630-1 LR

GEHRING 630-1 LR

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm Hedpfeu Nc Riex Ap Ejfn space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Hedpfsr A Hcbsx Ap Eefn Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 Hedeyalpcspfx Ap Eofn • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Hjdpfeyyniaox Ap Eefn

Condition: ready for operation (used), Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible. Hfjdpfx Aewynvtop Eon

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty Hfedpfx Aownn S Rsp Esn New paint RAL 7035/7031

Condition: used, Year of construction: 1998, grinding length 2000 mm Hfsdpsv S Ip Ejfx Ap Ejn grinding width 600 mm total power requirement 17 kW weight of the machine ca. 10 t

Condition: ready for operation (used), Hello, we offer used Erowa Powerchuck with pallets. Hodpfx Apeiq Iy Io Ejfn They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Hedpoxy Ikbofx Ap Esfn

Condition: used, Grinding wheel dimensions (od x id x width) Ø 650 x Ø 304.8 x 500mm Min/max diameter to be ground 3 / 200 mm Width of regulating wheel 500 mm Number of regulating wheel speeds Infinite Min/max speed of regulating wheel (r.p.m.) 10 / 255 r.p.m. Diamond dressing (auto/manual) Automatic longitudinal, manual penetration for both wheels Diamond dressing speed 255 r.p.m. Number of CNC axes 1 Regulating wheel dimensions (od x id x width) Ø 350 x Ø 203.2 x 500mm Width of grinding wheel 500 mm Maximum length to be ground in plunge grinding 500 mm Power of grinding wheel head motor 55 Kw Power of hydraulic motor 3 Kw Hjdpsix N Enefx Ap Esfn Total power 60 Kw Voltage 220/380V Length 2,300 mm Width 2,800 mm Height 2,100 mm Weight 15,000 Kg