Used Speedmaster 72 for sale (6,749)

Condition: used, Year of construction: 1992, functionality: fully functional, BOBST Domino 72 Folder Gluer for sale! Year 1992 Cold glue system ERO with 2 glue guns Rjdpfxjxlki Rj Aa Eol Max width 720mm Min width 126mm Max speed 400m/min Compact cardboard up to 600g/m². Automatic bottom system Counter ejector

Condition: good (used), machine/vehicle number: 1152, power: 37 kW (50.31 HP), fuel type: electric, overall weight: 1,015 kg, total length: 1,530 mm, total width: 1,005 mm, total height: 1,700 mm, Year of construction: 2005, operating pressure: 8 bar, noise level: 70 dB, pressure (max.): 8 bar, space requirement height: 1,700 mm, space requirement length: 1,530 mm, space requirement width: 1,005 mm, volume flow: 432 m³/h, type of cooling: air, motor manufacturer: KAESER KOMPRESSOREN, Key features: Airflow capacity: approx. 7.2 m³/min Operating pressure: up to 8 bar Drive motor: Electric motor with approx. 37 kW power Noise level: around 70 dB(A), enabling quieter operation Additional information: Energy efficiency: Equipped with a control system that optimizes energy consumption Cooling: Uses air cooling to maintain optimal operating temperature Dimensions: (L) 1530 x (W) 1005 x (H) 1700 mm Weight: 1015 kg Rsdpfxswtmxyo Aa Eol

Condition: good (used), Year of construction: 2004, functionality: fully functional, Coating Unit Optional Printing Thickness: 0,5mm Extended Delivery (X1) CP 2000: Touch Screen Console Straight Machine Alcolor Dampening Grafix Alphatronic 200: Powder Sprayer Ink unit Temperature Control Technotrans (Aircooled) Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Semi Automatic Plate Change High Pile Delivery IR Dryer Heidelberg Rsdowr T Rtjpfx Aa Esl Impression Account: 98 Mio.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Available immediately in Warsaw, Poland; Redpfsrrwh Rjx Aa Esl Good technical condition, checked and cleaned;

Condition: good (used), USED DEVLIEG 43H-72 SPIRAMATIC JIG MILL Equipped With: Spindle Diameter - 4" Spindle Nose Taper - No. 50 NMTB Spindle Travel - 20" Table Size - 35" x 72" Horizontal Travel - 72" Retraction of Table - 16" Vertical Travel of Head - 52" Spindle Speeds (16) - 21 to 1000 RPM Spindle Feeds (8) - .002" to .024" Milling Feedrates X & Y (16) - 0.5 to 36 IPM Rapid traverse in all directions Approx Floor Space - 205" x 146" x 126" Weight, Approx – 14.515 kg Dimensions: FB X RL - 11'8" X 16' with sliding gaurds X Height: 10'10" all the tools/microbores from the pictures will be delivered together with the machine and are included in the final price. Price Euro 14.700 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Rsdpfxeimd H Nj Aa Eel Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Rjdsvtgaxepfx Aa Eel

Condition: new, IVECO 72C18, New, Euro 6, wheelbase 3450, manual gearbox, differential lock, reinforced leaf springs with auxiliary springs, air conditioning, stabilizer bar, torsion bar, DAB radio, air-suspended driver's seat, electric windows and mirrors, fog lights, central locking with remote control, acoustic alarm Redpswwr Ubjfx Aa Eel

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,720 mm Number of bays / row of shelves: 01 pcs. 1,800 mm each Number of levels plus floor level: 03 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 30 pcs. Total pallet spaces: 30 pcs. Rodpfx Aeucp Uloa Ejl issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Profile dimensions: 120 x 100 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,050 mm deep 20x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 80 x 42 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 40x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm Rodpex Rc R Hsfx Aa Esl - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, DUROPLAST granulate injection unit, core pull, blow-out device, 4-cavity mould heating Rjdpfxex Ngmce Aa Eel

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Rsdpfox N D Ttsx Aa Eol Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: new, BENZ 727.130E6200 This is a holder from the BENZ Solidfix® series – a quick-change tool system for CNC machines, especially popular in woodworking, metalworking, and plastics machining. Features: Redpfx Aaew Rdwgs Eel • Clamping system: most likely ER collet (visible at the end of the body). • Intended use: For CNC machine spindles and BENZ angle heads. • Applications: Milling, drilling, boring – depending on the mounted tool.

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Redpfx Aaexv Exbs Ejl

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Rjdpfx Aemzbdwja Eol

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition Rjdpsim Sffefx Aa Eel – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: used, functionality: fully functional, load capacity per storage section: 10,000 kg, total width: 1,100 mm, load per truss pair (max.): 2,100 kg, frame height: 12,000 mm, clear span: 2,700 mm, product height (max.): 2 mm, Large Lot of Nedcon NR Pallet Racking, 12,000mm High (USED) Redpfxowhi Rze Aa Ejl · 1610x Frame Nedcon NR, Type 1006720, height options from 2,000 to 12,000mm, depths available in the following sizes: 900/1067/1080/1100x100mm, blue (section load max approx. 15,000kg, depending on beam heights). Frames are supplied in separate components. Both height and depth are variable! · 1400x Beam Nedcon NR, Type CC1004015, 2650x100x40mm, orange (2,150kg) · 16,960x Beam Nedcon NR, Type CC1004015, 2700x100x40mm, orange (2,100kg) · 390x Beam Nedcon NR, Type CC1104015, 2700x110x40mm, orange (2,350kg) Heights up to 12 meters and any depth are available. Pricing on request, depending on frame depth and required quantities. We also have a wide range of new and used Nedcon materials and accessories in stock! All prices exclude VAT. Payment: Due upon delivery. Ex warehouse Zutphen. Transport can be arranged if required. Used materials available while stocks last. Bastell Magazijninrichting BV Gerritsenweg 6 7202 BP Zutphen The Netherlands

Condition: good (used), ErgoPack 726X X-Pert Pallet Strapping Machine with Gate Rsdpfx Aex Nct Eoa Ejl A device for strapping loads with PP and PET straps. Manufactured in 2022. Very good condition. The 726X model features a heat sealer and a „tail” that passes through the pallet and feeds the strap to the operator without bending. Additionally, the machine is equipped with a module for tall pallets, known as a gate. Manufacturer’s description: The ErgoPack 726X is used to strap almost any type of load using PP (polypropylene) or PET (polyester) strap. The device is fully automatic (tensioning, sealing, and cutting the strap). It is characterized by high efficiency and ease of use, ensuring excellent results with minimal physical effort. The device is controlled from a control panel.

Condition: like new (used), functionality: fully functional, machine/vehicle number: SCANIA DC13 072A 0213, Year of construction: 2023, operating hours: 20 h, Design: Diesel generator is placed in a specially made noise-proof container Frequency: 50 Hz Voltage: 3 x 400/230 V Rated power (Prime): 450 kVA Non-overloadable power (Stand-by): 495 kVA The engine and alternator are flexibly mounted on a common steel frame. The fuel tank is built into the frame. container Rjdpfjxwzqpox Aa Ejl

Condition: excellent (used), Year of construction: 2020, Equipment: Integrated dosing pump/dosing module for rinse aid Integrated dosing pump/dosing module for liquid detergents Rinsing chamber made of high-quality stainless steel Spray arm control of all arms Manual hood opening Automatic program start after closing the hood Adjustable rinse temperature Turbidity sensor Adjustable rinse temperature Adjustable rinse time Heat recovery from waste water and exhaust air Vapour extraction Temperature display for tank and boiler Hygienic tank washing chamber Innovative spray arms Pump protection sieve Grease filter Extensive accessories (option)Miele pass-through dishwasher with exhaust air and waste water heat recovery - integrated dosing & water softener, PTD901 SST WES DOS ECO [6.4 kW] , 11917950 Always the right program Dishware-specific solutions Dishware-specific programs No matter what the dishes are and what the soiling: For There is an effective program for every requirement. Simple and flexible operation Full-touch display Full-touch display All important information is quickly and easily accessible via the convenient full-touch display. Design and execution Design pass-through dishwasher Line Dishwashing system Number of wash levels 1 Front stainless steel Tank volume in l 35.0 Application: Suitable for senior citizens' and nursing homes Suitable for hospitals Suitable for restaurants/bars Suitable for hotels Suitable for guest houses Suitable for communal catering Suitable for kindergartens Suitable for universities and schools Suitable for quick-service restaurants Rjdjgh Hu Hepfx Aa Eel Suitable for sports clubs Equipment: Integrated dosing pump/dosing module for rinse aid Integrated dosing pump/dosing module for liquid detergents Dishwashing chamber made of high-quality stainless steel Spray arm control of all arms Manual hood opening Automatic program start after closing the hood Adjustable rinse temperature Turbidity sensor Adjustable rinse temperature Adjustable rinse time Heat recovery from waste water and Exhaust air Vapour extraction Temperature display for tank and boiler Hygienic tank rinsing area Innovative spray arms Pump protection sieve Grease filter Extensive accessories (option) Mile hood dishwasher with rinse aid dispenser Descaling system Washbasin as side table left and right as a pass-through Washing baskets for glasses, plates and pots Connection 16 Ah

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min Rsdsvu Hvpopfx Aa Esl number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table Redsq Nm Htjpfx Aa Esl - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: used, Perfectly working grinding machine "станка 3Л722" Basic parameters Accuracy class A Maximum workpiece dimensions (length x width x height) 1250 x 400 x 400 Maximum dimensions on electromagnet 1250 x 400 x 280 Minimum dimensions on electromagnet 50 x 40 x 3 Distance from the spindle axis to the table mirror mm 210..625 Maximum product weight kg 600 Maximum weight on electromagnet 400 Machine work table Dimensions of table work surface (length x width) 1000 x 400 Table feed speed 3..35 Grinding head Dimensions of grinding wheel ПП450х80х203 Grinding wheel speed/min 1460 Maximum grinding speed m/s 34.4 Maximum diametrical feed, mm 430 Accelerated transverse disc feed m/min 1,2 Automatic cross feed for each table feed mm/rev 1..60 Maximum vertical disc feed, mm 415 ?? 0,002 ?? 0,2 Automatic vertical disc advance, mm 0,002..0,128 Vertical accelerated advance speed, m/min 0,2 Electrical equipment Number of motors 13 Disc spindle motor power, kW 11 Hydrostatic pump motor power 4 Hydrostation air heat exchanger motor power 0,09 Redpoqwzt Nsfx Aa Esl Lubrication system pump power 0,25 If you have any further questions, we will be happy to answer them.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. Redpfx Aaox Hqmze Ejl This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm Redjryv Nyepfx Aa Eel - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) bottom horizontal 230 mm 7.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) top horizontal 230 mm 7.5 kW 6) upper horizontal 230 mm 7.5 kW 7) lower horizontal 230 mm 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the required dimension (ATS) - Motor: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with a brake Top feed: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double Bottom feed: - Feed-in roller, toothed, driven, pivoting - 3 feed-out rollers, driven, metal, smooth - Rollers pneumatically loaded - Infeed table length: 2480 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed by Cardan shafts - Extraction nozzle diameter: 7 x 125 mm - Dimensions (L/W/H): 5520 x 1930 x 1900 mm - Weight approx. 4000 kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry timber – With ATS – Original DTR + CE documentation – Unrepainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary due to exchange rate fluctuations)

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine Redpfxsx A Sddj Aa Ejl The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.