Used Sls for sale (604)

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply Crjdpfozpzblox Aqvji - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: used, mileage: 23,700 km, power: 100 kW (135.96 HP), first registration: 03/2023, fuel type: electric, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, 103.3% State of Health (SoH) of the battery Technical data and performance: Engine: 100 kW (136 hp) / 260 Nm torque * Battery: 50 kWh (gross) / approx. 46 kWh (net) * Range: approx. 249 to 344 km (WLTP, depending on equipment) * Consumption: approx. 18.4 – 22.4 kWh/100 km (WLTP) * Top speed: 135 km/h Crsdpfxozmlmas Aqvsi Charging times: Direct current (DC): Up to 100 kW charging power. Charging from 20% to 80% takes approx. 30 minutes. * Alternating current (AC): With the standard 11 kW on-board charger, a full charge takes approx. 5 hours. [1, 2] Dimensions and weights (XL version): Vehicle length: 4,753 mm * Wheelbase: 2,975 mm * Max. cargo volume: Up to 4.4 m³ Battery certificate can be provided upon request Optional equipment: Airbags, driver and passenger side, as well as side airbags All-weather tires Anti-slip mat set Bott interior fittings Rear wing doors, asymmetrically split, glazed, 180° opening angle (Rear window wiper - rear window heating) Steering wheel: Leather steering wheel, flattened at the bottom, with steering wheel remote control (Safety equipment - Front collision warning with automatic emergency braking and pedestrian detection - Lane keeping assistant - Instruments, 3.5" color driver information display, with chrome trim - Traffic sign recognition - Driver fatigue detection Visibility features: - Rain sensor - High beam assist - Instruments, 3.5" color driver information display - 2 folding ignition keys) Rear view camera Window tinting with film, cargo area Keyless entry and start system "Keyless Open & Start" (for driver and passenger door, as well as rear wing doors or tailgate - driver and passenger airbags) Automatic climate control: Two-zone automatic climate control, front (with particulate and odor filter - manual recirculation mode - automatic air distribution - sun sensor - activated carbon filter - glove compartment, split - visibility features) Package: Grip & Go (IntelliGrip (Adaptive traction system with 5 selectable modes): - ESP off - ESP standard - Snow mode - Mud mode - Sand mode - Hill descent assist - Underride protection under the engine, metal - All-terrain tires 215/65 R 16 SL 98H - Raised suspension) Radio: Multimedia Navi Pro with 8" touchscreen color display and voice control for audio, telephone and navigation (automatic music recognition on audio devices with USB connection - Bluetooth audio streaming - Hands-free system via Bluetooth - Display of telephone directory and call lists - Up to 10 mobile phones can be paired - Display of images via USB interface - Navigation with integrated memory - Europe map - TMC - Tour planning - GPS module - Smartphone integration Apple../Android. - USB interface - Dual tuner - Graphic equalizer - 4 speakers - Steering wheel remote control) Standard equipment: Storage compartments (Edition) (Storage compartment in the instrument panel, driver side, closed - Storage compartment in the center console, front - Storage shelf above the windshield, open - Storage compartment in the front doors, suitable for 1.5-liter beverage bottles - Glove compartment, closed - Storage compartment on dashboard, passenger side, closed) Hill start assist On-board computer Brake light, third Deletion: Interior rearview mirror Driver information display, 3.5" Speed limiter and cruise control Paint: Solid paint Parking brake, electric Parking assist, rear Radio BT (Audio: - Bluetooth audio streaming, Telephone: - Hands-free system via Bluetooth interface - Display of telephone directory and c

Condition: used, Year of construction: 2001, functionality: fully functional, CENTAURO SL 3000 longitudinal cutting saw Cutting length: 3400 mm Cutting width (max.): 600 mm Cutting height (max.): 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min Machine dimensions: 5285 x 1532 x 2150 cm (H) Crodpfx Aqjzmf Idevsi Weight: 1500 kg Year of manufacture: 2001

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 80 t, stroke length: 300 mm, table width: 800 mm, table length: 600 mm, throat depth: 330 mm, EXNER hydraulic single-column press, NEW, EEX SL 80 series Pressing force: 800 kN Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 450 mm Cjdpfx Ajzcwrneqvori Stroke: 300 mm Table dimensions: 800 x 600 mm

Condition: used, mileage: 593,605 km, power: 405 kW (550.65 HP), first registration: 05/2009, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: beige, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MB Truck CD Radio * PARROT hands-free system * CB radio * On-board computer with multi-function steering wheel * Air conditioning * Auxiliary air conditioning (for when parked) * Auxiliary heater (for when parked) * Cooler box ----* Voith Retarder * Differential lock, rear axle * Hill start assist * TipTronic transmission with pedal ----* Alloy wheels * Sun visor * Rotating beacon lights * Auxiliary headlights * Air horns ----* JOST E1 00 1245 fifth wheel coupling * JSK SL Slider pneumatic sliding mechanism * Rockinger 4040/G150 drawbar coupling * Spare wheel ----* Tire size, front axle: 385/65R22.5 * Tire size, rear axle: 285/80R22.5 * Fuel tank: 380 liters * AdBlue tank: 55 liters * Technical gross vehicle weight: 20500 kg * Unladen weight: 8450 kg * Permissible total weight (vehicle and trailer): 87000 kg Crsdpfjzhh A Hjx Aqvji * Overall length: 6650 mm * Next inspection due: 09.2026 ----Vehicle number: 12235----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services----YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal Codpfx Aqszz N Uqevsri - Projection laser SL LASER Pro Director 6 - Slotted table/magnetic table

Condition: new, Year of construction: 2024, functionality: fully functional, PRO RICHYOUNG cycle-controlled lathe Model: RIC-TC1840N Serial No.: T0123100074 Year of Manufacture: 03/2024 in the following configuration: - CNC control system SIEMENS 828D-SL SHOP TURN - 10.4" LCD color display - Control panel, swiveling 45° - PRAGATI 8-position tool turret VDI30 - Enclosed work area (CE) with electric locking, full enclosure with viewing windows - Chip tray on rollers, extendable to the front - Automatic central lubrication of the slides - Ball screw in X and Z axes - 3-color status indicator light - Work area lighting - Coolant system - Heat exchanger for the control cabinet - Set of operating tools - Technical documentation - CE version - Colors: * RAL 9016 – Traffic white * RAL 9023 – Pearl dark gray Technical data: Center height: 230 mm Distance between centers: 900 mm Swinging diameter over bed: 460 mm Swinging diameter over cross slide: 230 mm Z-axis travel with 8-position turret: 875 mm Bed width: 300 mm Headstock: Main spindle bore: 58 mm Spindle mounting: ISO / No. / DIN: 702-1 / 6 / 55026 A1-6 Spindle speed: 0 – 4,500 rpm Recommended chuck diameter: 200 mm Feeds: Feed rate X-axis: 0 – 5,000 mm/min Feed rate Z-axis: 0 – 7,000 mm/min Rapid traverse Z-axis: 5 m/min Rapid traverse X-axis: 7 m/min Positional accuracy (X/Z): +/- 0.005 mm Repeat accuracy (X/Z): +/- 0.005 mm Diameter of ball screw X-axis: 25 mm Diameter of ball screw Z-axis: 40 mm Travel: X-axis: 250 mm Z-axis: 875 mm Tailstock: Quill diameter: 58 mm Quill travel: 150 mm Morse taper in quill: MK 4 Max. workpiece weight: Chuck and tailstock: 175 kg Chuck, steady rest, and tailstock: 261 kg Drives: Power of spindle motor S1 – 100%: 11 kW Power of spindle motor S6 – 40%: 17.5 kW Cooling system: Capacity: 47 liters Pressure of coolant pump: 5 bar Crsdezzcygepfx Aqvoi Flow rate at 5 bar: 33 liters/min Power of coolant pump: 1.0 kW Dimensions: Length: 2,680 mm Depth: 1,480 mm Height: 1,880 mm Weight approx.: 2,400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 5,000 W Current laser power: 5,335 W (as of 27/04/2023) MACHINE DETAILS Control system: SINUMERIK 840 D SL Power supply: TruDisk via the machine Solid-state laser: TruDisk 3001 with 1 fiber optic output Operating hours Operating hours: 67,508 h Laser on-time: 41,657 h EQUIPMENT Excitation via pump diodes Laser power control Automatic shut-off Torque drive in combination with linear direct drives Enclosed beam guide with fiber optic cable (LLK) Machine chiller unit (water-air) Integrated control cabinet lighting Codpfx Aqjyhmvtsveri Automatic longitudinal pallet changer 17" touch color display Wide longitudinal conveyor belt Workspace lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass against lens contamination Protective glass monitoring ControlLine: height control and sheet edge detection Simple workshop programming Advanced workshop programming Fast re-run Integrated technology data Programmable cutting gas/pressure selection FastLine FlyLine AdjustLine Teleservice via internet Data transmission via USB interface RJ-45 network connection Safety with CE marking Light barriers Multi-chamber extraction system Compact extraction unit Machine enclosure with certified viewing window Right-hand door and electric roll-up roof

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] - Travel : 390 / 600 [mm] TURNING-MILLING SPINDLE - X stroke : 350 [mm] - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 80 - Tool exchange time : 4.5 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 68 [kW] WEIGHT & DIMENSIONS - Machine height : 2500 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Spindle hours : 19781 [h] - Number of turning-milling spindle hours : 9713 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank Crjdpfxjv Ig Avo Aqvji * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Parts catcher

Condition: used, fuel type: diesel, weight max. in kg:5000 kg Load Arm:600 mm arm length:2000 mm stroke:3200 mm :12000 kg :4500 kg height over floor:2460 mm weight of the machine ca.:8,2 t dimensions of the machine ca.:4,15 x 1,45 x 2,46 m :3,05 x 1,45 x 2,46 m Crodpfxjcxxzho Aqvoi Diesel boom-fork lift with particle filter, hydraulic swivelling 2-fold telescope boom with 2 hooks, up to max. 2000 mm extension 5000 kg at 600 mm SL; 3700 kg at 1000 mm SL; 3050 kg at 1400 mm SL. Solid-rubber tyres. Engine temperature indicator, front lights, brake lights, indicators front and rear, reversing lights, adjustable driving seat. UVV until 02/2008.

Condition: used, Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -stepper motor control Cedpfx Ajda Nyzoqvjri -Manufacturer: Phytron -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Screen keyboard -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/410/H132 mm -Weight: 17 kg

Condition: used, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, loading space volume: 45 m³, suspension: air, tire size: 385/65 r22,5, color: light grey, NEW TECNOKAR DELFINO SL 9000 ALUMINUM DUMP TRAILER, AVAILABLE FOR IMMEDIATE DELIVERY; CARGO SPACE DIMENSIONS: L 9000 MM X W 2500 MM X H 2000 MM; Cjdpfx Aqehk Uzcsvori WHEELBASE: 4650 MM; TIRES: 385/65 R22.5; DISC BRAKES; AIR SUSPENSION; FIRST AXLE LIFTABLE; THIRD AXLE STEERABLE; TANK CAPACITY: 45.5 CUBIC METERS; EBS; ELECTRIC TARPAULIN SYSTEM; JOST LANDING GEAR; HALDEX HYDRAULIC SYSTEM.

Condition: used, Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Boge, intake filter from compressor type SL 270 -Type: 569.0007.11 -Intake filter cartridge: 569.0007.31 Crjdpfxeppdhgo Aqvsi -Maintenance indicator: 569000503 -Dimensions: 530/440/H850 mm -Weight: 28 kg

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan Codpfx Aqoppdhvevjri -Manufacturer: Boge, fan from compressor type SL 270 -Fan: Ø 420 mm -Engine: Type FC80/2 -Power: 1.1 kW / 2815 rpm -Hole circle: Ø 295 x 22 mm -Total dimensions: Ø 495 x 315 mm -Weight: 13 kg

Condition: new, Trovalizing and lapping machine Manufacturer: ASSFALG Model: TV 95-SL Condition: New machine Speed: 1,500 - 3,000 rpm (stepless) Internal dimensions of the trough: 498 x 384 x 410 mm Filling volume: 70 l Csdpfxodwq Hgs Aqveri Standard equipment: - Timer - Water tank - Water pump - Operating manual

Condition: used, Stick electrodes 4.0 x 350 -Type: SL 19 G -AWS: A5.5-96: E8018-B2-H4 -Price: per package -Number: 10 packages available Cjdpfx Aqed Emhdevjri -Weight per package: 1.6 kg

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Credjvlnvrjpfx Aqvoi

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor Cjdpfouddcgjx Aqvori of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, mileage: 120,000 km, first registration: 10/1984, fuel type: gasoline, color: grey, gearing type: automatic, number of seats: 2, Equipment: ABS, air conditioning, central locking, Mercedes Benz 380 SL/Cabrio EX USA vehicle Newly restored New fenders/trunk lid etc.. Alloy wheels Air condition Crodpfx Aqjudgm Iovoi Hardtop etc.....

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm Crsdpfott Da Iox Aqvei BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: used, Year of construction: 2015, turning diameter max. 315 mm swing diameter 315 mm turning height 175 mm Control SIEMENS 840 D SL x-travel 660 mm z-travel 300 mm turning speeds 7500 U/min tool change unit 12 fach VDI 40 total power requirement 36 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,4 x 2,2 x 2,7 m Codjvxwrcspfx Aqvsri Renishaw LP2H Chip conveyor No chuck available No tool holders available No live tooling

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm Cedpfomduh Eox Aqveri bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Year of construction: 2003, condition: ready for operation (used), Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. rapid traverse speed: 20m/min, control: Siemens 840D SL, connected load: 135kW, length: 7800mm, width: 3000mm, height: 3250mm, weight: 42t, with machine documentation, installation plan, foundation plan, transport plan, Knoll coolant system, Knoll chip conveyor, ILT extraction system and Promot loading and unloading gantry. Regularly serviced by the manufacturer, the machine was completely overhauled by the manufacturer in 2016. An on-site inspection is possible. Crodpfx Asztdtlsqvoi

Year of construction: 2018, condition: ready for operation (used), A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible. Crsdpfx Aqozp Rgkovji

Year of construction: 2019, condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Crodpfx Aqeuk I Eysvei