Used Sigma for sale (29)

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Dodpfxjd Nkpyj Af Iswd This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Condition: used, Year of construction: 1999, machine/vehicle number: M5164, Type Sigma Eccon from Italy X1250 Y650 Z685 Dwsdpfehbzmhex Af Isd Rapid traverse XY 24m, Z 15m / min Spindle 12000 rpm 21 tools magazine HR410 handwheel Heidenhain TNC426 Weight 7500kg

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm Dwjdpfx Ajidchcef Ied CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Dodpfexhfpdox Af Iewd Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: ready for operation (used), Sigma Zenit 3 machining center Manufacturer: Sigma Type: Zenit 3 Condition: good, ready for operation Power-on hours: 8600h Spindle hours: 1800h Spindle speed: 12,000 Spindle taper: SK40 X-travel: 1000mm Y-travel: 500mm Z-travel: 550mm Tool stations: 50 Chip conveyor Oil mist extraction Through spindle coolant (IKZ) With 4th axis Nikken Dodsxnpi Ijpfx Af Iewd

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand HEIDENHAIN Dodjxnd Rtopfx Af Ijwd This 3-axis Sigma Leader 6 vertical machining center was manufactured in 2007. It features extensive travel capabilities with X-axis at 1250 mm, Y-axis at 810 mm, and Z-axis at 630 mm. Rapid traverse rates reach up to 50 m/min, and it includes a high-capacity tool magazine with 40 positions. If you are looking to get high-quality milling capabilities, consider the Sigma Leader 6 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Dsdpfx Aod Nkp Asf Iewd This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 15 m/min, overall weight: 8,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 21, Equipment: CE marking, chip conveyor, documentation/manual, SIGMA VERTICAL MACHINING CENTER MODEL MISSION 5 X-AXIS STROKE 1250 Y-AXIS STROKE 600 Z-AXIS STROKE 685 TOOL CHANGE 21 PLACES Dwedpjwq Snzofx Af Ied ISO 40 SPINDLE SPINDLE ROTATION SPEED 12,000 RPM CHIP CONVEYOR HIGH PRESSURE THROUGH SPINDLE FANUC 18 M CNC FANUC MOTORS AND DRIVES COMPLETE WITH MANUALS

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the Dwodpjhvz D Hsfx Af Iod requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Dwodpfxexhffrs Af Isd Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Year of construction: 1999, condition: not inspected (used), Sigma plate heat exchanger for milk processing Dwodpfeh D Hkpsx Af Iod

Condition: ready for operation (used), Year of construction: 2002, Detailed information X-travel 850 mm Y-travel 480 mm Z-travel 580 mm Dsdpjvt Ak Tofx Af Iowd Rotary table (4th axis) No Control CNC Fanuc Series 18 Table length 1000 mm Table width 540 mm

Condition: new, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 48 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 40 kVA, rotational speed (max.): 15,000 rpm, overall weight: 7,200 kg, Equipment: documentation/manual, SIGMA Mission SMV-1050 Vertical Machining Center - Travels: X 1,050 mm | Y 560 mm | Z 510 mm - Table: 1,250 × 560 mm | Maximum table load 1,000 kg - Spindle: BT-40, power 11 kW (S1) / 15 kW (S6) - Spindle speed: up to 8,000 rpm - Working feed rates: 1 – 8,000 mm/min - Rapid traverse rates: 22 / 22 / 16 m/min - Automatic Tool Changer (ATC): 24 tools, swing arm - Machine weight: approximately 4,800 kg - Overall dimensions: 2,950 × 2,450 × 2,850 mm (approximate) - CNC control: (according to standard configuration or customer's request) Dsdpfx Afexgqdqe Ijwd ✅ Designed for workshops needing versatility, precision, and robustness in a compact footprint. ✅ Fully equipped: cooling systems, chip protection, automatic lubrication, and CE-compliant safety design.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR - Year of manufacture: 2004 - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle coolant: 30 bar - Extraction unit - Renishaw tool measurement prepared - Magazine with 50 slots Dodjxlg Ucspfx Af Ijwd Original purchase price in 2004: EUR 230,000.00 Defects: - Motor spindle electrical fault (probably winding burnt out) - Control supply unit UV 101B (repair cost approx. EUR 600.00) Net price without dismantling and unloaded, ex location Luckenwalde (Germany), without transport

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Djdpfx Afsidchgs Iswd Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: ready for operation (used), Condition Used Stock Number 9B 9B Djdpswk R E Sofx Af Ijwd This listing is for the Sigma Aldrich 2mag Mix1 Stirrer The unit is in full working condition and is ready for immediate use Sigma Aldrich 2mag Mix1 Stirrer Stirring Volume: Up to 10,000 mL Speed Range: 100–2,000 rpm (extremely wide range) Design: Ultra-flat, wear-free magnetic stirrer with 1 large stirring position Drive System: 100% maintenance-free and wear-free, based on inductive 2mag-Magnetic-Drive concept Stirring Characteristics: Jerk-free stirring, even at low speeds Suitable for viscous media 4-step power settings: High power for large/viscous volumes Reduced power for warming-free continuous operation Soft-Start setting: ensures reliable, jerk-free centering of stirring bar Display: Clear digital interface for speed and status

Condition: good (used), Year of construction: 2015, LIFT SIGMA - C-HOOK MACH-ID 7820 Manufacturer: LIFT SIGMA Djdpfx Afswrzn Hj Iswd Type: C-HOOK Year of construction: 2015 Length: 4200mm Width: 1900mm Height: 600mm Weight: 8200kg

Year of construction: 2009, condition: excellent (used), The centrifuge of the brand Sigma type 1-15 PK is ideal for separating solutions and suspensions of different densities in sample tubes. Technical specifications Voltage: 230 V, 50-60 Hz Power: 630 W Speed: 14000 rpm Dedpepa N R Tofx Af Ijwd External dimensions (W) x (D) x (H): 35 x 55 x 35 cm Rotor 24 x 1,5/2 ml

Condition: used, Year of construction: 1996, working width: 530 mm Dwodjiqg N Eopfx Af Ied working height: 250 mm cutter head: tersa number of blades: 4 height adjustment: electrically read out workpiece thickness: digital feed speed: 2 speeds infeed roller: steel outfeed roller: steel table roller: yes motor power: 5,5 kW suction connection: 140mm machine length: 1200 mm machine width: 1400 mm weight: ca. 900kg

Condition: used, Year of construction: 1997, SIGMA MISSION 1 Machining Center FANUC O – M CNC Fully functional and in excellent condition Connected and ready for operation Table size: 750 mm x 400 mm T-slots – number, width, pitch: 3 x 18 x 125 mm Travel: Dwjdexcgyyjpfx Af Ied X: 600 mm Y: 400 mm Z: 450 mm Spindle taper: ISO 40 Spindle speed: 6,000 rpm Tool magazine: 16 positions Supplied with various toolholders/tools Includes 2 machine vises Weight: 4,500 kg Year: 1997, complete with full documentation

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. Djdpfx Ajhwduxef Iewd General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Sigma, Vexta Stepping Motor Stepper motor -Type 20-3437D200-F075 -Shaft: Ø 10 x 30 mm -Dimension: 130/90/H90 mm Dodpfx Afjqvp Ngs Iowd -Weight: 2.4 kg

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Dwodehwdu Hspfx Af Ijd Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Transport pickups, crane pickups -Spare part: from a machining center manufactured by Sigma type Mission 5 Dwedpfocnf E Ujx Af Ijd -Take: Ø 140 mm -Rezes recording: mm -Pitch circle: mm -Number: 4 pieces available -Price: complete -Dimensions: -Weight: 23 kg

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Dwsdpfx Asidcg Aof Iod Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm