Used Scm R for sale (655)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Nljdpfxjz Rz Hve Akish

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Nlodezzx Iyepfx Akish Sale of professional woodworking machines

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 Nljdpfx Aezwf Ekskish documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion Nlodj Ad Hatepfx Akijh system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018801, functionality: fully functional, power: 9.5 kW (12.92 HP), workpiece length (max.): 3,086 mm, workpiece width (max.): 2,155 mm, overall weight: 3,841 kg, year of last overhaul: 2016, Equipment: CE marking, documentation/manual, We are offering this ready-to-use SCM Pratix S22 machining center, manufactured in 2016. The machine features a 9.5 kW spindle (max. 24,000 rpm) and an F12 2.2 kW drilling unit (12 independently operated). The machine can be viewed in operation in October and the first week of November 2026. Nlodpfx Akoz Sp N Uoioh If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Nledo Aflwyjpfx Akijh

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Nlodpfxo Aduqas Akijh Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Nljdpfx Ajzyghlekieh Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Njdpfx Aoxlnpnokijlh

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Nodpfx Aozz Syvjkielh Remote control Additional USB hardware key for the Maestro CNC program.

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Nljdo Aazbwjpfx Akish Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Incl. CE & all documents Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Nlodpfxoz Ippxo Akish Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters Njdpfx Akezvmygoiolh for straight edges for angled edges particularly suitable for edge banding of shaped parts READY FOR OPERATION

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Nodpfx Akszzdyuoijlh

Condition: used, Year of construction: 2001, Number of belts: 2 pcs. Max. working width: 1100 mm Min. working height: 4 mm Max. working height: 170 mm 1st belt: Calibrating roller Abrasive belt length, 1st unit: 1900 mm Abrasive belt width, 1st unit: 1115 mm 2nd belt: Combination unit Abrasive belt length, 2nd unit: 1900 mm Abrasive belt width, 2nd unit: 1115 mm Material thickness measuring device: Yes Fixed feed rate: 4.5/9 m/min Control: Hand-operated control panel Belt oscillation: Yes Infeed height: Variable (lower table moves) Table stroke: Electro-motorized Table display: Digital Operating pressure: 6 bar Approximate weight: 1207 kg Nljdpfxez R Duvs Akijh Motor power: 15 kW Dust extraction diameter: 2x160 mm Location:

Condition: like new (used), Year of construction: 2022, machine/vehicle number: AA 10005475, functionality: fully functional, operating hours: 2,540 h, number of axes: 5, overall weight: 5,725 kg, Work table and workpiece clamping: 8 TV FLEX rails, length 1,600 mm 8 lifting devices for 1,600-mm rails 24 fixed vacuum supports, 145 × 145 mm, H = 75 mm 8 rotatable vacuum supports, 180 × 65 mm, H = 75 mm Front stops, H = 75 mm Additional front stops, H = 75 mm Double, removable central reference stop with 6 stops, H = 75 mm Working area X: 5510 mm Working area Y: 1620 mm Workpiece passage Z: 250 mm Vector speed X-Y axes: 78 m/min (ProSpeed) Machining units: 5-axis machining unit DIRECT 5 JQX: 13.5 kW with liquid cooling 3-way positionable extraction hood Drilling unit F23 L RO AX: 13 independent vertical spindles 10 horizontal spindles (6 in X and 4 in Y direction) Integrated slot cutter in X direction Drilling unit OF0480: With pneumatic vertical positioning (single Z-axis) Drilling unit with additional frequency inverter Device for increasing the drilling pressure in the Z direction Preparation for Hiteco units with 1 pneumatic interface Tool length measuring system Linear tool changer magazine TRB14: Arranged on the side with 14 tool positions Suitable for milling cutters and, depending on the configuration, larger tools or angular heads Moving linear quick-change magazine FAST 14: With 14 tool positions, designed for short tool change times and high machining efficiency Vacuum pump: 250/300 m³/h; 50/60 Hz Control and software: SCM Maestro Connect Maestro Active, Human Machine Interface (HMI) Maestro CNC Hardware key for Maestro CNC Basic Additional key for Xilog Maestro (USB) Nljdpfx Ajz R Rgmekieh Operating system: Windows 10 Embedded 64 Bit Control panel with integrated EYE-M PRO PC Chip disposal: Chip extraction mat 5510 mm; mobile chip container at the end of the machine bed Electrical connection: 400 V - 50 Hz

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Nsdpjzwg H Asfx Akislh Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Nljdpfx Akoz S T Ubjijh Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Nodsz Suv Hjpfx Akielh Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions Nsdpfez Ebzhjx Akiolh INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Nodpfx Akjzhgz Isislh Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats Nedpfx Aozynkhjkielh complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Nlsdpfoz Iyvpox Akieh

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, input current: 59 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 170 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,380 mm, workpiece height (max.): 170 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 2,300 mm, total length: 6,000 mm, total width: 2,100 mm, overall weight: 3,840 kg, table length: 3,300 mm, table width: 1,400 mm, Equipment: CE marking, documentation/manual, AUTHOR M200 CNC MACHINING CENTRE GENERAL FEATURES Panel passage: 180 mm on H50 devices AXES SPEED: X = 90 m/min (with Pro-Speed safety device) X = 25 m/min (with Pro-Space safety device) Y = 90 m/min Z = 30 m/min MOTORIZED CHIP CONVEYOR PROGRAMMING SOFTWARE XILOG MAESTRO 3D – the new powerful software developed by SCM Group – is the software for programming MORBIDELLI’s machining centres. • Visualization in 3D graphic mode of the workpiece, geometries, machining operations, and worktable; • Available: shading mode with different shading levels, wireframe mode, rendering visualization, geometry visualization, and toolpath visualization (CAM); • Zoom function, general functions, and visual aid for the workpiece; • Sketching function for inputting geometries, thus creating drawings (CAD) with a preview. Serie 200 working area: 3050 X 1380, N. 1 LASER FOR EASY CUP POSITIONING, N. 1 GROUP 600 - PRISMA KT (11 KW - 18,000 RPM), N. 1 The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality, even with high material removal rates. Characterized by a specific configuration with axes rotating at 50°, the Prisma machining head offers several advantages over traditional 5-axis machining units, such as: • Full use of machining areas, both with 5 axes and with a vertical spindle. • Spindle overall dimensions are kept outside the working area. • Very streamlined spindle design in the case of horizontal machining. The machining head is equipped with an 11 KW “High Speed” electrospindle and has a centralized exhaust system with automatic activation/deactivation of airflow on the working units. Technical specifications: Routing unit with 5 interpolating axes Electro-spindle with HSK 63F quick-release tool holder Rotation speed: 600-18,000 rpm Right and left rotation Power: 11 KW at 16,000 rpm (on S1 duty) 15 KW inverter C-axis rotation = 640° B-axis rotation = 270° C-axis equipped with a TTS locking system (Total Torque System – patented by SCM) “For life” grease lubrication Liquid cooling with a heat exchanger PRESET FOR ANGULAR HEADS on PRISMA KT SPINDLE, N. 1 52.22.71 DRILLING UNIT F26L2 (14V-40X-40Y-L0/90), N. 1 Drilling unit equipped with vertical displacement on an independent Z axis. Technical features: • No. 14 independent VERTICAL spindles • No. 6 horizontal spindles in the X direction • No. 4 horizontal spindles in the Y direction • On/off pneumatic vertical stroke of any spindle: 60 mm • Bit attachment: 10 H7 Nedoz Eakbepfx Akislh • Max. bit length: 70 mm • Adjustable rotation speed from 2,000 to 8,000 rpm, controlled by an inverter • Motor power: 3 kW • Integrated blade with independent vertical displacement and 0-90° rotation • Blade diameter: 160 mm (max) Features: Number of tools on board: 16 (max) Max. tool diameter on board: 300 mm (3 axes) Max. tool diameter on board: 350 mm (5 axes) Centre-to-centre distance between positions: 85 mm Single tool weight on board: 8 kg (max) Total weight of tools installed: 48 kg (max) TOOL ROOM, 10 positions, on the right side, N. 1 52.21.97 250(108) M3/H 50(60) HZ - VACUUM PUMP, N. 1

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, working width: 230 mm, working height: 120 mm, Equipment: CE marking, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES 1. horizontal bottom 11 kw Nljdpfezcn A Rjx Akieh 2. vertical right 7.5 kw 3. vertical left 7.5 kw 4. horizontal top 11 kw 5. horizontal top 7.5 kw 6. horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012