Sigma Profile Steel Beam CS

Profillänge: 1.400 mm / CS-Sigma.: 200 x 65 x 18 mm / sendzimir verzinkt

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Dusdpeb Nulhjfx Akkew Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Dsdpfx Asitcu Eokkeuw Accessories: Base frame Condition: Used

Year of construction: 2016, condition: as good as new (ex-display), Round industrial tent, brand SUIHE, new, model: XL-308515R, year of manufacture 2016 Dimensions: width 9.15 m x length 26 m x height 4.57 m Dusdpfei Hc Drsx Akksw Structure: galvanized steel structure, Φ60*1.8mm and Φ40*1.5mm, made of Q215 steel tubes, according to GB/T700-2006 standard. Tarpaulins: PVC material thickness 300g PE, double fabric covered with PVC, factory colors: green or white. Access door type: simple mechanical door Door dimensions: 3.5 m x 3.5 m Snow resistance: 2.28 kpa (Compressive stress at a deformation) Wind resistance: 80km/h Standard duration of use: more than 15 years. Uses: industry, agriculture, material storage, car storage, hangar, Increased resistance, easy to assemble and disassemble, large capacity, excellent stability. The tent material is green with white. Model dimensions in meters: XL-308515R 9.15*26*4.59 (W*L*H (m)) 300g PE Metal box packaging Transport metal box dimensions 2.95m*0.75m*1.18m Tent weight: 1300kg Use of SUIHE industrial tents: 1. Agriculture: shelter for animals and storage space for hay. 2. Aviation: hangar for planes 3. Space for storing machines, industrial equipment, temporary hall 4. Navy: ship storage, containers 5. Garage for vehicles etc. PRICE 8.500 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Duodpfx Aey T E Itskkew Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Refrigerant system Copeland with original condenser Type: D6DT5-320X-AWM/D (x4) Volume: 126.9 m3/h (x4) Cooling capacity: 220 kW at -10°C/40°C, 56.2 kW at -35°C/40°C Refrigerant: R404A With original condenser Guntner GVH 067B/2x3N Pieces in stock: 1 Condition: Used Dedpfsg N Hu Sex Akksuw We have many other refrigeration machines. Chillers, compressors, coolers, condensers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is available on machineseeker.

Condition: like new (used), Intact vacuum skin packer Model: RM571 Dedpfefg Agqex Akkjuw Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW - 4 aggregate hoppers of 25 m³ - Capacity: 50 m³/h - mixer size: 1.0 m³ / 1500 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included Dusdjhd I S Aepfx Akksw - 2-year guarantee This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. more machines and mixing plants on our website Further information: Intended use: construction, usable material: concrete.

Condition: new, Year of construction: 2019, Storage tanks, e.g. for bitumen for asphalt mixing plant(s), etc. (vertical design) 7 x 70 m³ 1 x 68 m³ with agitator New, unused, from project cancellation, thermal oil heated and electric heating possible, complete, immediately available, for sale (individually or as a complete package). Dsdpfx Aksw Nwtljkouw

Condition: used, 🧰 Product features • Manufacturer: Palflex • Condition: used • Color: orange Dedpsvfnqvofx Akkouw • Height: 400 cm • Depth: 110 cm • Bay load: 24,000 kg • Beam length: 410 cm • Beam load capacity: 3,000 kg per level Scope of delivery: • 11 pre-assembled frames, depth 110 cm, height 4 m • 40 beams, length 4.1 m, 3,000 kg load capacity per section • 80 safety clips • 44 concrete anchors • 1 load capacity sign per racking row Used frame protectors available immediately, extra charge per piece €15 net! Further accessories can be found in the accessories catalog. 💰 Price €2,790 net excl. VAT • Bulk discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times (Specifications and details are subject to change and errors, as well as prior sale. Please see our terms and conditions. All prices excl. VAT, ex stock.)

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system – Negotiable!! • Electrical data: 100-240V 50-60Hz • Powder feed rate up to: 200g / min • Air consumption up to: 250L / min at 6 bar • Air quality / moisture: less than 1.3 g / nm3 • Air quality / oil: less than 0.1 mg / nm3 Data for the powder coating gun • Output voltage: 100 kV • Max. output current: 100 µA • Hose length: 6 m - antistatic hose • Polarity: Negative • Conformity: ATEX 2mJ Description • Applicator for quick color changes, ready to use out of the box • Intuitive 7" touch display • Automatic cleaning function – gun flushing • Up to 20 user-defined programs Duedpfxog U I Ugj Akkew • 3 automatic programs • Remote control of paint quantity and program change from the handle Equipment • Controller of the PSS series • ProfiJector RI-1 blunt powder injector • ProfiGun powder gun with quick coupling and remote control • Set of hoses • Stand with vibrator and extraction unit with fluidization PSS driver • 7-inch touch panel, operable with gloves • 3 automatic programs (overcoating, hard-to-reach areas, flat surfaces) • Graduation in 0.1kV and 0.1uA steps • Advanced pneumatic valves for air flow control (romer - patent pending) • Actual air flow measurement responds to errors such as pressure drops or system blockages • Extended diagnostic tools • Possibility to name programs • Possibility to control external master controllers with ModBus protocol (A series) ProfiGun PM-1 gun • A lightweight ergonomic gun, perfectly balanced with a contoured handle • The ceramic cascade with a voltage of up to 100,000V efficiently charges all types of powders • The new nozzle generation ensures perfect powder penetration into complex shapes • The profiled nut provides a good grip • The conductive handle with a high carbon content offers excellent grounding for the painter • The spray gun is made of special materials with increased impact resistance • Fully disassemblable design with a replaceable powder path tube • The spray gun is patented in the USA and the EU • Cascade polarity - negative ProfiJector powder coating pump Description • Design of a new efficient injector • The most effective feed angle, proven by research • Saves paint and air compared to injectors with a right angle • Compared to other pumps, it is characterized by relatively low operating costs • The injector is covered by a European patent