Used Short Bar Feeder for sale (19,297)

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Ppedpoh R Tvtsfx Alteu chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Year of construction: 2005, condition: excellent (used), diameter: 1700 mm Stainless steel Ppodefd E R Ajpfx Alteu

Condition: ready for operation (used), Stainless steel tub Psdpfx Aex Hyp Esltopu Dimensions: 1900 x 890 x 200 mm

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Podpfx Aljy Avl Istspu Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Ppodpfom Sg Hcsx Altou

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Ppjdpfjunm S Hex Altsu

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Psdpfx Ajq Hu H Roltopu Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: used, mileage: 472,079 km, power: 235 kW (319.51 HP), first registration: 04/2016, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 7,690 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, Year of construction: 2016, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Tyre size: 315/70R22.5 Suspension: air suspension Rear axle: Double wheels Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: Renault Psdpjzhll Sefx Altepu Tail lift: BAR CARGOLIFT, slider lift = Additional options and accessories = - Roof spoiler

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm Podpfezdy Dbox Altjpu

Condition: used, Feed unit MAKA -used- infinitely variable feed speed ----- Technical data ----- Rollers: 3 pieces Psdpju R S R Ujfx Altepu

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm Ppsdpewfhg Njfx Altou - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. Pjdpezcqniofx Altspu 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Condition: new, Bar-type light (yellow series) Psdpfx Aozhnz Asltjpu IVSL-YLW300-WHI-W COGNEX “Partially unpacked for photography – unused item from inventory clearance.”

Condition: excellent (used), Year of construction: 2007, 1 used container steam boiler ----- - installed in a 20” sea container - Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Podpfjzguypsx Altopu Operating pressure: 16.0 bar Increased test pressure: 29.6 bar Water content at nominal water level approx.: 993 l Water content when full approx.: 1,365 l Year of manufacture: 2007 CE marking: 0036 Equipped with a Weishaupt WMGL combination gas/oil burner, gas control system, control panel, feedwater pump, and the existing coarse and fine fittings.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L -Quantity: 5x hand pump available -Price per piece Podpfx Alohmgz Tetjpu -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, filter and valves -Type: NHY-40-12.2-160-4/400/230V -Hydraulic pump: Pressure up to 200 bar -Flow rate: 12 l/min -Motor: -Hydraulic reservoir: with level indicator Ppjdpozg Emyjfx Altsu -Individual components: see photos -Dimensions: 515/415/H680 mm -Weight: 79 kg

Condition: used, Year of construction: 2005, Technical details: spindle passage: 36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Ppsdpfszg Aw Nex Altsu Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, -Baking sheet, 800 x 1200 mm, made of reinforced corrugated aluminum. -130 sheets in stock. -10 cavities. Psdszfzizopfx Altspu -Equipped with reinforcing bars for improved rigidity during use. -Professional format, suitable for bakery and pastry ovens. -Corrugated structure designed to support products during baking. -Durable and practical accessory for regular use in the laboratory.

Year of construction: 1998, condition: used, machine/vehicle number: 71257/1, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa Ppjdpfxjzgt A Ns Alteu - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

Condition: used, Year of construction: 2022, empty load weight: 52 kg, fuel type: gasoline, Several well-maintained, two-wheeled tractors with mowing bars for sale: Briggs & Stratton engine 4.5 HP 87 cm mowing bar Ppsdpfxszhmraj Altou Self-propelled, forward and reverse In very good condition! Price: €900, excluding VAT Several units in stock!

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves Ppjdpjzfgrhofx Alteu -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos -Dimensions: 380/220/H450 mm -Weight: 28.7 kg

Condition: good (used), Hydraulic pump, high-pressure pump Pjdpfx Alob A Ibdotopu -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge display up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Condition: new, Year of construction: 2015, Feed unit Pjdpfx Alsm Rmf Setopu Exhibition machine Year of manufacture: 2015 3-roller feed Roller diameter: 120 mm Roller width: 60 mm Roller spring travel: 20 mm Speed Forward and reverse operation: 4-8-11-22 m/min Motor 0.75 kW / 400 V Weight: 28.5 kg Availability: in stock Location: Flörsheim

Condition: new, Feeder Year of manufacture 2022 max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Ppodpfx Alsnvkhzjtsu Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Year of manufacture 2021 Ppedpfx Ajnvkh Ejlteu max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim