Used Shell And Tube Heat Exchanger for sale (22,854)

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Isdpfx Aepcibmja Ijic

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. Iiodjx Ik Dcepfx Aa Isc 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Low and Duff Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph Iodpomqm Dzjfx Aa Ieic

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Iiodpfx Aszc Hkyoa Ijc

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Iedox Eg Upepfx Aa Isic Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Iedpfx Aaszdgl Hs Ijic Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Automation Programmable automatic bonding sequences

Condition: used, mileage: 858,100 km, power: 260 kW (353.50 HP), first registration: 11/2008, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro LE intercity bus with partial leather seats and seatbelts (Vehicle 305) First registration: November 20, 2008 858,100 km Engine: 11,967 ccm 260 kW / 354 hp Iisdpfx Aszfdk Ioa Isc Euro 5 EEV Technical inspection and emissions test due Permissible total weight: 19,000 kg Unladen weight: 13,020 kg Payload: 5,980 kg Axle load front: 7,245 kg, rear: 11,500 kg Overall length: 13,057 mm, overall width: 2,550 mm, overall height: 3,400 mm 50+20 seats and standing places + wheelchair/stroller or 50+15+1 Seatbelts, armrests, leather headrests Ramp at the double door Single door at the front, double door at the rear Windshield with stone chips Air conditioning, auxiliary heating, ventilation Radio/CD LAWO Without cash register Emergency exit Electric mirrors + mirror heating Fire suppression system out of order; fire extinguisher needs to be reprogrammed; battery was disconnected Engine slightly oily Full air suspension Fully automatic transmission Tires 275/70R22.5, approximately 30% tread remaining in the front, approximately 30% in the rear Price: €6,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Iedelkc U Eopfx Aa Ieic

Condition: used, Gainsborough bagger and All-Fill powder depositor. Isdpfxovvpphj Aa Isic

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs Iodpfx Aaoh U Nvkj Ieic RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Iiodpfxeu Dahnj Aa Isc Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: new, empty load weight: 410 kg, maximum load weight: 890 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,320 mm, loading space height: 1,527 mm, total length: 3,821 mm, total width: 1,806 mm, total height: 2,125 mm, Year of construction: 2026, Humbaur box trailer HK 132513-15P FlexZurr with a ramp instead of a door at the rear, white. Maximum load: 300 kg, with a ramp for easy loading. Our price: €4,100 including 19% VAT, 6.4% delivery surcharge, and vehicle documents! Description: Our single-axle trailer is designed for maximum stability: hot-dip galvanized steel chassis, plastic seals on the doors, and robust reinforcements in the roof and front panel – this trailer has a long service life. The integrated lashing system secures the load inside. A light provides sufficient illumination. This ensures your goods arrive reliably and undamaged. Technical data: Trailer type: Single-axle Construction type: Plywood Weight: 410 kg Gross vehicle weight: 1300 kg Payload: 890 kg Internal length: 2515 mm Overall length: 3821 mm Internal width: 1320 mm Overall width: 1806 mm Internal height: 1527 mm Overall height: 2125 mm Loading height: 535 mm Ramp angle approx. 21° Tire size: 14 inches Equipment: V-shaped drawbar, hot-dip galvanized 13-pin connector Floor panel, 15 mm thick Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating (GFK top layer for 5290.002 & 5291.002) Isdpfxezbl Izo Aa Ioic Interior light, mounted Rotating rod latch and hinges, galvanized 6 lashing rings in the frame profile, flexibly adjustable, tensile force 400 kg per lashing ring, Dekra tested Support wheel

Condition: new, empty load weight: 615 kg, maximum load weight: 1,885 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, total length: 4,525 mm, total width: 2,026 mm, total height: 2,460 mm, trailer brake: trailer braked, Year of construction: 2026, Humbaur box trailer HK 253015-18P FlexZurr with a ramp instead of a rear door, maximum load 300 kg, with a tapered front. Price: €5750 including 19% VAT, 6.4% delivery surcharge, and vehicle documents! Description: Our tandem-axle trailer is designed for maximum stability: hot-dip galvanized steel chassis, plastic seals on the doors, massive reinforcements in the roof area and front panel – this trailer has a long service life. The integrated lashing system secures the load inside. A light provides sufficient illumination. This ensures that your goods arrive reliably and undamaged. Technical data: Trailer type: Tandem-axle Construction: Plywood Door opening dimensions: 1400 x 1750 mm Weight: 615 kg Gross vehicle weight: 2500 kg Payload: 1885 kg Internal length: 3040 mm Overall length: 4525 mm Internal width: 1510 mm Overall width: 2026 mm Internal height: 1800 mm Overall height: 2460 mm Loading height: 565 mm Tires: 15 inches Equipment: V-shaped drawbar, hot-dip galvanized Iiedpjzbk Exefx Aa Ioc 13-pin plug Floor panel, 15 mm thick Side walls and roof made of multi-layer wood, 15 mm thick with UV-resistant plastic coating Interior light installed Lashing rings in the frame profile, tensile force 400 kg per lashing ring (Dekra tested) Support wheel, fully automatic Humbaur multi-function lighting with reversing light

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam Iiodpfjw A H T Aex Aa Ioc

Condition: good (used), D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph Iiedpjrwz I Aefx Aa Ijc

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h Iiodpfetxinaox Aa Iec The price refers to one line (exstruder+press)

Condition: used, SPENCER AND HALSTEAD AUTO SHOT BLASTER SAND BLASTER Belt type Automatic shotblaster. Ijdpfx Aoydic Ioa Ioic

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer Iodpjtqmwgefx Aa Ioic

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Iiodpfx Aonxi Uuea Ioc Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Iiedpsnxi R Usfx Aa Iec Coolant System Dust extraction Lighting

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Isdolhqdmspfx Aa Isic

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Iiodpfx Aastqmvrs Ijc

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Iedswnriaepfx Aa Ieic Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Iedpfx Aok Eakvsa Ioic Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V Iiedpslatz Dsfx Aa Iec - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm