Used Boiler Tube for sale (3,052)

Condition: used, Year of construction: 1951, Functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Manufacturer & Type: Manufacturer: Vitkovice a.s., Ostrava Boiler Type: Water-tube vacuum steam boiler Classification: Gas-fired Ielhjwwtxuecdwvsid Fuel System: Primary Fuels: High-Processing Gas (VPP) Coking Gas (KP) Natural Gas (ZP) Ignition Fuels: Coke oven gas Natural gas Performance Parameters: Nominal Steam Output: 80 t/h Minimum Stable Output: 48 t/h Operating Range: 60-100% of nominal capacity Steam Conditions: Outlet Temperature: 525°C Outlet Pressure: 9.6 MPa Feedwater Temperature: 150°C Combustion System: Number of Burners: 6 Key Features: Vacuum-type water-tube design Multi-fuel capability Wide operating range (60-100%)

Condition: good (used), Year of construction: 2008, INSMAN FIELD CVA-IF-3 Steam Boiler water-tube type Maximun continuous production 3000 Kg/h Power 2132 Kw / 1,825,000 kCal/h Maximum operating pressure: 29 bar Test pressure 37.7 bar Heating surface 133.56 m2 Total volume 4,381 m3 Max. temperature service 232.8 ºC DUNPHY Brand modulating type burner. Model TG 37 ZM LC PV. Natural gas power 500-2200 Kw Ijlhcjwryazjdwvsid Available documentation

Condition: used, Year of construction: 1993, Functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Boiler Type: Stirred tube boiler with granulation chamber Serial Number: 3069 Year of Commissioning: 1993 Manufacturer: SCG Performance Characteristics: Nominal Output Capacity: 100 t/h Economic Load: 85 t/h Minimum Stable Load: 60 t/h Efficiency: 89.1% Steam Parameters: Superheated Steam Pressure: 9.6 MPa Superheated Steam Temperature: 525°C Feedwater Temperature: 150°C Auxiliary Systems: Emission Control System: Type: Electrostatic precipitators Separation Efficiency: 99.9% Thermal Output: Iiolhcdswwtvtjwvsd Rated Thermal Capacity: 77 MW

Condition: used, Year of construction: 1999, Functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Type: Stirred tube boiler with granulation chamber Serial number/Year of commissioning: 3121/1999 Producer: Vitkovice a.s. Ostrava Boiler greening contractors (year): PROVYKO, s.r.o. (2018) ČKD PRAHA DIZ (2016) Nominal output: 200 t/h Economic performance: 170 t/h Minimum stable load: 120 t/h Iielhcdwjwwtqdsvjd Superheated steam parameters: Pressure: 9.6 MPa Temperature: 525 °C Feed water temperature: 150 °C Efficiency range: 91.2% to 92.6% Dedusting system: Type: Electrostatic filters Separation efficiency: 99.9% Rated thermal output: 154 MW

Condition: used, Year of construction: 1999, Functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Type Stirred tube boiler with granulation chamber Serial Number / Year of Commissioning 3121 / 1999 Producer Vitkovice a.s. Ostrava Contractor of Boiler Greening (Year of Commissioning) PROVYKO, s.r.o. (2018) ČKD PRAHA DIZ (2016) Iiolhcdjwwr Iuowvsd Nominal Boiler Output 200 t/h Economic Performance 170 t/h Minimum Performance Without Stabilization 120 t/h Superheated Steam Pressure 9.6 MPa Superheated Steam Temperature 525 °C Feed Water Temperature 150 °C Boiler Efficiency 91.2 – 92.6 % Dedust Removal / Permanent Operational Separability of Filters Electrostatic filters / 99.9% Rated Thermal Output 154 MW

Condition: new, Year of construction: 2025, travel distance X-axis: 1,520 mm, travel distance Y-axis: 3,030 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 10,600 kg, total length: 10,100 mm, total width: 2,500 mm, total height: 4,500 mm, Max. Processing Size: 3000×1500 mm Max. Cutting Thickness： Iolhcdwev Awlqsvsid Can hold external diameter φ10-220mm (Recommended: round tube φ40-200, square tube: □40-200), weight 20Kg/m Pipe Cutting Type: 6 meters Automatic Chuck Max.m Synthesis Speed: 150m/min Acceleration: 2.5 G

Condition: excellent (used), Year of construction: 2018, 1 x Karpovicz 600L Boiler (KK/600A) (Late 2018). Located Wiltshire. Iiolhewglbtscdwvsd

Condition: excellent (used), Year of construction: 2006, High pressure gas used tube semi trailer for helium, hydrogen, oxygen, nitrogen, argon, methan, CNG Semi trailer SCHMITZ Iislhcdev N Ex Sowvjd year 2006 Tare 7900 kg Bottles: Volume 17400 liters Working pressure 200 bar Tare 16750 kg We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Ielheq Ul Rvscdwvsid Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system Iijlhcdwjwfpwpevsd -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Main parameters and guarantee value are calculated according to fuel parameters: -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% - bark – 100%

Condition: new, Year of construction: 2025, pipe diameter: 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Iiolhcdwjv D Uhfoved Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill Islhsv Hcwtjcdwvoid

Condition: used, Year of construction: 1997, Functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system Iolhev D Uz Ejcdwvsid - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: new, Functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Machine weight: 29t Iolsww Upzohcdwvsid Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: new, Functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Iiolhcdswwz Dlewvod Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, Functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 20,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS12056FG Ielhsww Umascdwvsid Maximum length of pipe:

Condition: new, Functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Iielhcdwswu Rm Rovjd Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: good (used), Enclosed Complete Hargassner Industrial Boiler System in a 40 foot container. Hargassner Industrial Boiler WTH 150-200 - with Lambda - Hatronic RA 150-500 - 199kW Wood Chip / Pellet Boiler. SMS fault finding system included and all mounted in a Portable Container. NCV (Net Calorific Value) efficiency at nominal output 94.7%, NCV efficiency at 30% nominal output 94.7%, GCV (Gross Calorific Value) efficiency at nominal output 86.9%, GCV at 30 % nominal output 89.4% Seasonal energy efficiency ETA's 86%, Boiler temperature range 75-78°C,. Including 10 ton wood pallet hopper Iiolhcdwewylxrsvod Features & Benefits* Energy-saving & cost-cutting, Highest efficiency, Heat exchanger cleaning in 1st & 2nd pass, Unique step grate system, Fully refractory-lined combustion chamber for temperatures, Lambda sensor with fuel quality detection, Energy-saving ignition: 2 x 300 W, Flue gas recirculation as standard, Ember bed monitoring, contactless by means of sensors, Flame temperature monitoring, Dual metering double rotary valve, Pellets suction during operation, Automatic ash discharge (optional with 300 litre ash bin), Modern touch display control, Induced draught (EC motor) with vacuum monitoring. * information is a guide only and can not be guaranteed correct.

Condition: good (used), IFT Shell and tube heat exchanger Islhcowwqacedwveid 2017, Stainless, two in stock, shell and tube heat exchanger, Shell length 2700mm x 150mm diameter, see plate for more spec

Year of construction: 2007, Condition: ready for operation (used), Additional Equipment Iislhcdwsw Aiigovod 3D cutting head 4 chucks This TTM FL 600 3D Tube Cutting Machine was manufactured in 2007, featuring a powerful 4000-watt CO2 laser source and a versatile 3D cutting head. It accommodates round tubes from 100mm to 610mm and square tubes from 100x100mm to 400x400mm. With four chucks and loading lengths up to 14,000mm, it's ideal for large-scale cutting tasks. Consider the opportunity to buy this efficient Tube Cutting Machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Iislhowrt Tzjcdwvjd Weight: 1600 kg

Year of construction: 2010, Condition: ready for operation (used), Control Unit Brand SIEMENS Main Drive Number of axis 5 Max Material Thickness Steel 25 mm Stainless steel 20 mm Additional Equipment Automatic (un)loading with 8 loading locations This 5-axis TTM FL 600 3D tube cutting machine was manufactured in 2010. It features a Trumpf Truflow 5000 resonator with 5kW power and a 3D cutting head capable of 45-degree cuts. It handles tubes up to Ø610mm, with a maximum wall thickness of 25mm for steel. The machine includes an automatic loading system with 8 locations. If you are looking to get high-quality cutting capabilities, consider the TTM FL 600 3D machine we have for sale. Contact us for more information. Application Types Ijlhjwzznrocdwvsid Cutting

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg Islhcewrt Tuodwvsid

Condition: ready for operation (used), machine for expanding and reducing tubes Islhcdjwrt Tnjwvjid 2 heads

Condition: ready for operation (used), Tubebender equipped with 2 different tools for bending profiles for guide wheels of sectional doors. Iiolhowxzzyscdwvjd CBM rollforming line for making sandwhich panels for sectional doors click here Manni / Cannon PU press click here Rollforming line for making different profiles for installation sectional doors click here Bonnamy tubebender click here