Plate heat exchanger

FISCHER Maschinen- u. Apparatebau GmbH

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Fedpfx Agezty Hno Ispl Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Fpjdpfjyaiafjx Ag Ijl Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: good (used), Nowicki KN1-125 Bowl cutter Fedpfonp Nc Iex Ag Ispl Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph

Condition: like new (used), Year of construction: 2012, Pump Stand Screw Vacuum Pump & Roots Vacuum Pump Manufacturer: Busch Type: Cobra NC 0630 B + WV 2000 C Status: As New, Refurbished Fodpfx Agsv I Ak Ns Ispl Warranty: 6 Months

Condition: excellent (used), Year of construction: 2009, Type: A510 Serial number: 10597961 Year of construction: 2009 Belt width: 300 mm Speed: max 250 slices/min Fpjdpfxoyhm T Eo Ag Iol Slice thickness: 0.5 - 30 mm Infeed length: max 600 mm Product diameter: max 210 x 180 mm Stacking height: max 60 mm Blade diameter: 420 mm Power: 3 x 400V, 50Hz, 2.3kW DImensions: 2350 x 800 x 1850 mm Weight: 420 kg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing Fpjdpfjrtq I Eox Ag Iel including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Fpodpfxsxtndnj Ag Iol Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right Fpodpfx Agecht Nyo Iel - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request. Fodpfsyidvdjx Ag Iopl

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Fedpfx Aoki Tlqjg Ijpl Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm.