Used Screw Feeder for sale (7,473)

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Gsdpfohn S Efex Ai Nsiu Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm One side at wheels

Condition: excellent (used), Year of construction: 2013, operating hours: 20,453 h, functionality: fully functional, Atlas Copco GA11VSD+ screw compressor Inverter integrated 11 kW 13 bar 1.95 m3/min Gjdpfx Aey Uiycsi Noiu Year of manufacture: 2013 Operating hours: 20,453

Condition: ready for operation (used), VOEST DA 360 / Heidenhain digital display -Center height above bed: 400mm Gedsza Dh Ropfx Ai Njiu -Turning diameter above bed: 800mm -Turning diameter above cross slide: 500mm -Turning length: 1000mm -Bar capacity: approx. 87mm -Spindle speed range: 14 - 1000 rpm / 18 spindle speeds -Automatic longitudinal / facing feeds -Automatic rapid traverse on Z-axis -Tailstock MK 5 -Collet chuck 250mm -Multifix base with inserts -Work light -Machine feet -Documentation Dimensions: L x W x H: 3 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Giodpfx Aeybbczei Nsu Good condition Price ex location Transport available at extra cost!

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Gedpfxev Im Swo Ai Neiu Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Year of construction: 2020, condition: new, functionality: fully functional, Single Screw Extruder Gedpfx Aiofw Rigj Njiu Screw diameter: 25mm / 25 LD Motor 2,2 kW Die Head available Feeding system available waterbath and pelletizer available Visit and Trial possible.

Condition: good (used), Year of construction: 2001, bar diameter (min.): 3 mm, bar diameter (max.): 32 mm, - Guide channel (oil-damped) - max. bar length 3,200 mm - included guide channel: D 21 mm Gisdoy N Tiqepfx Ai Neu - material pusher length L - centering device - synchronization unit - last mounted on a sliding head automatic lathe - weight approx. 800 kg - dimensions LxWxH 4,000x700x1,200 mm

Condition: excellent (used), functionality: fully functional, Arc feed unit BV Material passage 120/100 Gisdpfjrbk E Hjx Ai Nsu Feed speed 2-13 m/min Three-phase motor Feed rollers 90 mm The feed rollers have been replaced Transport available at extra cost! Due to the age of the used machine, warranty is excluded for business customers upon sale.

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Gijdpfxexqgf Ee Ai Nsu

Condition: used, Year of construction: 2008, Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5 Giodsy I Nt Nopfx Ai Nou

Condition: excellent (used), C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm Giodpfxor R Abhj Ai Neu -Clamping depth: approx. 120 mm -Number: 2x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Condition: good (used), Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm Gedpegv Nqxsfx Ai Nsiu -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm -Weight: 284 kg

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg Gsdpfezb Idrsx Ai Neiu EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 18.5 kW (25.15 HP), pressure (max.): 10 bar, Flow rate 2530 l/min Weight approx. 440 kg MARK MDX 3000 refrigeration dryer, built in 2007, 13 bar, capacity 3000 l/min. ÖWATEC 130 oil-water separator Giodpfx Aev U Ncxei Nju 750 l vertical compressor tank, built in 2021

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 300 mm, saw blade bore: 30 mm, Double saw with OMGA feeder Gjdpfxjzcv Iuj Ai Njiu

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Height: approx. 280 mm Screw diameter: approx. 180 mm Gedew Rpygopfx Ai Njiu Motor: 1.1 kW

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,250 mm, Vertical bandsaw SCHULTE Type VB12 Gjdpfeyivhnjx Ai Neiu The machine is fully operational and functional – with new electrical installation and control system. The set includes feeders, conveyors, and operator cabin – all visible in the photos. Max. cutting height: 1250 mm Max. diameter of processed log: 1450 mm Length of hydraulic carriage: 5700 mm Main motor power: 55 kW Exact dimensions are shown in the drawing attached in the photos.

Condition: excellent (used), Aerzen VM 9 R Delta Screw Compressor Gjdpjgg Sgaefx Ai Neiu with sound insulation hood Suction pressure: 1 bar Suction volume: 600m³/h Motor power: 55 kW Very good condition, directly from production!!!

Condition: like new (used), Year of construction: 2017, operating hours: 5,425 h, functionality: fully functional, Screw compressor, Atlas Copco GA30FF Dryer integrated. 30 kW 9.75 bar 4.79 m3/min Year of manufacture: 2017 Operating hours: 5,425 Godpey Tvd Sjfx Ai Nsiu

Condition: used, Year of construction: 1994, volume capacity 5,63 m³/min suction 1 bar pressure 8 bar turning speeds 3000 U/min engine output 37 kW Gijdotqql Rjpfx Ai Neu weight of the machine ca. 660 kg dimensions of machine L x W x H 1,35 x 1,05 x 1,43 m

Condition: used, Year of construction: 1996, output 30 kW suction power 4.200 l/min Gjdpsxu Ntajfx Ai Njiu turning speeds 5.092 U/min overpressure 10 bar dimensions of machine L x W x H 1,72 x 0,90 x 1,60 m

Condition: used, Year of construction: 2021, machine/vehicle number: ITJ514296, AIR ENERGIE CONTROL 3+ controller, maximum pressure 13 bar Giodpfsy Sqiyjx Ai Nju

Condition: used, Year of construction: 2021, machine/vehicle number: ITJ719403, AIR ENERGIE CONTROL 3+ controller, maximum pressure 13 bar Gedpfxoy Sqkde Ai Neiu

Year of construction: 2005, condition: used, machine/vehicle number: 15-230068, With digital display Godpfey Sqkqex Ai Neiu

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer. Godpeza Eausfx Ai Njiu