Used Screw for sale (5,374)

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Phsdpfex Hyfyex Aa Esa Weight: 1800 kg Engine power: 11 kW

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Podpexur Sfjfx Aa Eeha

Condition: good (used), Screw Conveyor Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Pedshfdvijpfx Aa Eoha Screw dimensions: diam. 150 x 2700 mm

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-800 • Type: Double Helix Screw Washer • Capacity: 80 ton per hour • Dimension: 1750 x 8650x1900 mm • Screw Size: Ø 800x8000 mm • Motor: 2 x 15 kW Heavy duty Gamak • Water Consumption: 65-230 m3 • Including chassis, motor and safety guards. Pjdpfxjwclabe Aa Esha FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2009, operating hours: 100 h, functionality: unexamined, overall weight: 10,250 kg, total length: 5,000 mm, total width: 2,100 mm, total height: 2,400 mm, power: 530 kW (720.60 HP), fuel type: electric, operating pressure: 3 bar, Equipment: type plate available, Make Ingersoll Rand Model: CH6-C125MX1 Year of manufacturing: 2009 Serial no: V-7667 Working hours (on service meter): Low hours!! Capacity (Kw) 530 Voltage 400 Frequency (Hz) 50 Rpm 2980 Amps (A) 920 Dimensions LxWxH (mm) 5000 x 2100 x 2500 Pjdpfx Aasv A T Uhe Eeha Weight (kg) approx. 10250 Total quantity in stock 1 Capacity (m3) 7.66 Nm3/h Max. pressure (Bar) 2.8 Country of origin Italy Comments Almost Unused compressor

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 Pedpfod Sg Hcjx Aa Ejha 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Output: 200–450 kg/h Screw diameter: 2 x Ø 75.0 mm L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Phedpfjx Npbpex Aa Esa Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Year of construction: 2008, condition: good (used), Complete compressor and air station Manufacturer: KAESER Phjdpegw Diaefx Aa Eja Models: AS 36 / TC 31 Year : 2008 Working pressure 7,5 bar

Condition: used, Van Beek stainless steel dosing screw / screw conveyor Diameter: 150 mm Motor power: 0.75 kW, 111 rpm Phsdpfxjx Nzzhj Aa Eoa Entirely stainless steel See our other listings VMA Wekerom

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and Psdpfou R S A Dox Aa Eoha efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected Phsdpfohabk Djx Aa Esa -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Phsdpfx Aaeiyx Uzs Esa Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: like new (used), – Centre distance 1000 mm – Swing over bed 360 mm – Swing over gap 490 mm – Swing over cross slide 180 mm – Spindle bore 52 mm – 70–2000 rpm Psdpsx N A D Djfx Aa Ejha – Infinitely variable speed – Digital speed display – Longitudinal and cross feed – Digital readout on two axes – Brake – Coolant system – Lighting – Safety cover – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: used, Dosing unit, dosing screw, dosing hopper Equipped with movable bottom to prevent bridging Including control cabinet Psdpfx Aex Nzvfea Eoha Screw diameter approx. 30 mm See our other advertisements VMA Wekerom

Condition: good (used), Year of construction: 2008, Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg Phsdpfx Aasb A Igms Eoa

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Pedpfx Aajiyya Ao Ejha Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, Stainless steel dosing screw, feed screw conveyor, auger Equipped with additional feed hopper with aluminium lid Screw diameter: 200 mm Motor power: 3 kW, 36 rpm Total length: 1730 mm Pjdpfx Ajx Nzu Usa Esha See our other listings VMA Wekerom

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Phedoh Eyduspfx Aa Eea Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Condition: used, Stainless steel dosing screw, pipe screw, auger Diameter: 150 mm Motor power: 1.1 kW, 148 rpm Entirely stainless steel Phsdpfex Nykhex Aa Eja See our other listings VMA Wekerom

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Pedpfx Aeiyyndja Eoha More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. Phodpfx Ajiyynwja Eja We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2017, condition: used, screw size 30 mm Psdob Niqhjpfx Aa Ejha Capacity 1000 kg/h Drive 240 kW L/D

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board Psdpfxsc Rukwe Aa Ejha optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Phedji Dtbuspfx Aa Eea > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric Psdpfxji Dtbqo Aa Eoha > further accessories Visit us at our Wuppertal plant.