Used Scrap Winder for sale (716)

Condition: used, Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg Hsdezm Iy Nepfx Aicjfk

Condition: ready for operation (used), Year of construction: 1998, Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible. Hfjdpfsvf Iz Ujx Aicsk

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Hfsdstphubepfx Aicok

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Hsdpfx Aetywukeicefk Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Installation and set-up of the unit at your machine is also possible.

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm Hsdpfeu Drugox Aicjfk -Weight: 57 kg

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each Hjdpfxob Sc Sts Aicefk -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg Hsdpfjgylq Sjx Aicjfk

Condition: good (used), Punching tool, punch, scraper, hold-down device Hodpfxequx Nze Aicsfk -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Hfsdozp Nycspfx Aicok Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: excellent (used), Available: Immediately Hedpfspr Uu Uex Aicofk

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Hjdohwt H Aopfx Aicefk Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: excellent (used), Surface straight edge Stock number (28691a) Length 1500 mm Width 157 mm Hsdpfx Aieywihfjcefk Weight 60 kg

Condition: excellent (used), Tuschier Straightedge (28691) 90° Prisms Length: 1000 mm Leg length: 85/120 mm Hedpfx Aieymmflecofk Weight: 29 kg

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Hfjdpfxed Eygps Aicek Length: 410 mm Handle length: 210 mm Width 125 mm

Condition: new, Product: Scraper in PE - LD Hjdpfxjd Eykzo Aicefk Color: white, extra soft and very flexible Other: For process engineering in the field of filter presses. to remove the filter cake Length: 410 mm Handle length: 210 mm Width: 125 mm

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Hfsdpfx Aiod Ey Rwocek Width 125 mm

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. For process engineering in the field of filter presses. to remove the filter cake. Hfjdpod Eyfpefx Aicsk Length: 410 mm Handle length: 210 mm Width 125 mm

Condition: new, Product: Scraper in PE - MD Hodped Eyiksfx Aicefk Color: orange - semi-hard and flexible Other: For process engineering in the field of filter presses. to remove the filter cake Length: 410 mm Handle length: 210 mm Width: 125 mm

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Hfjdjd Ey R Nopfx Aicjk Width 125 mm

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Hfsdpfx Ajphvl Tjicek Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: new, Scraping blades are used as tools for various purposes, including fine removal of chips, removal of old paint layers, and cleaning of soiled surfaces. When purchased, scraping blades are usually not immediately usable; they are simply a piece of steel sheet. To make them functional, a fine edge must first be ground. Hfsdpfoftm Slsx Aicjk We offer fully functional, new scraping blades made of Swedish steel in thicknesses of 0.4 mm and 0.5 mm. If required, we will gladly grind your "used" or "new" scraping blades and restore them to a functional state. Contact us. We will be happy to provide you with a quote for new scraping blades, either ground or unground, and/or a grinding service. We would be pleased to provide you with further information regarding scraping blades.

Condition: used, GEWINDEROLLMASCHINEN VEB WMW Hjdjig Txmopfx Aicjfk GWR 80GR WITH A LOT OF TOOLS

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. Hsdpfx Aiov Tb A Iocsfk For further information, see the rating plate.

Year of construction: 2025, condition: new, functionality: fully functional, UMG-110.56 Scraper conveyor is designed for transporting wood waste after processing. The conveyor works at an angle. The conveyor is anchored to the base during installation. The speed of the chain and scrapers can be set with a speed regulator, the design speed is 15m/min at 50Hz. The length and height can be adjusted according to your needs. Hfedswdgfuopfx Aicok

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Hfsdpsztykgefx Aicok Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile