Used Scm Minimax Me 35 for sale (571)

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Height and tilt electrically adjustable Spindle fi30 7 kW motor Ijdpewt A Iqjfx Ad Ustp 4 spindle speeds Very good condition

Condition: used, machine/vehicle number: 008115, X axis working area: 5200 mm Itedpfx Adew Idd Ue Uep Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 19 Total number of tool changer positions: 26

Condition: good (used), SCM IFB02 Bootwash Iedpfx Adeqqhvpo Ujtp Stainless, single station, rotary boot wash

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) Isdpfsxxkt Aox Ad Uetp • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: AH00004861, temperature: 15 °C, operating pressure: 6 bar, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension Itjdpfxottakhe Ad Ujp - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: excellent (used), For sale is a nice jointer-thickness planer from SCM. The machine works flawlessly and can be inspected and tested on site. About the machine: - 410 mm planing width Itsdpfx Aoxqg Uaod Uep - 3-knife Tersa cutterhead - Motor brake - Tiltable fence - 240 mm planing height

Condition: excellent (used), Four-sided planer scm sintex nte Planing width max 180 mm Planing height max 105 mm 4 spindles Bottom + top 7.5 kw Right + left 7.5 kw Electric height and width adjustments Worktop lubrication pump Headset Spindle speed 6000 rpm Spindle bore diameter 35 mm Weight 900 kg European CE certificate Technical documentation Itsdpfx Asvzr Drjd Usp Very good condition

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Ijdpfsvvi I Rex Ad Uetp

Condition: used, Year of construction: 2012, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, main saw diameter: 315 mm, trimming length: 3,200 mm, type of input current: three-phase, input voltage: 400 V, - Year of manufacture: 2012 TECHNICAL SPECIFICATIONS: - Max. saw blade diameter: 315 mm - Cutting length: 3200 mm - Max. cutting height: up to 100 mm - Angle cutting: 0-45 degrees - Saw blade speed: 4000 rpm - Main motor power: 5 kW - Scoring unit motor power: 0.9 kW Isdpfx Adexdyvdo Ustp - Max. parallel cut: 1270 mm - Weight: 800 kg

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Isdpjxllxasfx Ad Uetp Dimensions (LxWxH): 1200x80x1350 mm Fence jaws made of wood Including wood-based 3-roller power feed with stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A3347169, CNC machine SCM, Record 100 AL action line, 5-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, safety mat control, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling 1 large vacuum pump with white label and 1 small vacuum pump: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Isdpfx Adjxg El Aj Ujtp Frequency 50/50Hz Speed 950/1150min-1 Required power 5.5/6.4kW Inlet capacity 244/286m³/h Max. vacuum 200/200mbar

Condition: excellent (used), SCM S520 thicknesser Working width 520mm Working height 250mm Feed speed adjustable: 4 steps Isdpfxjitkx Ee Ad Uetp Shaft with conventional knives 4 knife shaft Power 4kw Weight 670kg

Condition: excellent (used), SCM T130 Shaper (Spindle Moulder) Long tables with extension 4-roller power feed Itedpfoxw U N Eox Ad Uop Spindle diameter 30 mm Motor 5.5 kW 5 spindle speeds Foot brake Forward/reverse rotation Machine condition: very good.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Itsdpfjvwbp Aox Ad Ujp

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls Iodjg Tdfdopfx Ad Ujtp possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 4,970 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, spindle speed (min.): 600 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 24, mount diameter: 350 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Complete machine, with Coral filter system and SCM lifter for sale. The equipment has very little use. Numeric control machining centre, with mobile gantry and fixed worktable for the processing of solid wood and various types of materials: glued laminated timber, plywood, chipboard, MDF, Aluminium etc. Designed using the best three-dimensional solid modelling systems, the structure is composed of a machine bed and a mobile gantry made of electro-welded steel. Component's milling of machine bed are performed on high quality CNC machining centres, with one single positioning operation, in order to guarantee the very best planarity, perpendicularity and precise tolerances. The control unit is a numeric control interfaced with an industrial PC. The CNC solution with PC combines all of the qualities of numeric controls with the user-friendliness typical of personal computers. The PC allows to use the operator interface Maestro cnc, developed by SCM to make machine programming fast and simple even for the less skilled operator. Technical specifications: - drilled and tapped holes spaced 120x120 mm for vacuum connection of jigs and equipment fitting - groove scheme spaced 40 mm for suction cups or rubber gaskets - n. 2 working areas - max. dimension to work in Y direction = 2170 mm TELESOLVE teleservice via internet Mobile console with "eye-M PRO" integrated PC TECPAD - Remote machine control Mobile console with 7" touch-screen color monitor for control and management. PRISMA KT Machining Head The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality also with high stock removal. Technical specifications: Routing unit with 5 interpolating axes − electro-spindle with HSK 63F quick release tool-holder − Rotation speed 600-20000 rpm Iodpfxowd Nrdj Ad Ustp − right and left rotation − max power (S1/S6) 11/12 kW (15/16.5 HP) from 9000 rpm − Inverter − C-axis rotation = 640° − B-axis rotation = 270° − C-axis equipped with TTS locking system (Total Torque System – SCM Patent) − "For Life" grease lubrication − liquid cooling with heat exchanger - Automatic dust extraction hood with four positions and ON-OFF by workpiece program. Two 250 (300) m3/h - 50 (60) Hz vacuum pumps Vacuum pump for each half-table. Independent vacuum circuit for each half-table. PRO-SPACE Safety system – full protection of the machining head with anti-ejection strips curtains and bumpers with emergency sensors - Emenency cable in the operator area - rear and side protection along the perimeter Enclosed cable-holder chain MAESTRO ACTIVE Human-Machine interface software (HMI) Maestro active is the new interface software (HMI) which has been unified across all SCM technologies. A single operator can easily and confidently run multiple SCM machines, reducing operator training times and facilitating entry into production. Windows 10 embedded 64 bit operating system Maestro cnc programming software MAESTRO CNC SOFTWARE SUITE – USER INTERFACE AND PROGRAMMING Advanced nesting free-form + Label module for Maestro cnc Rapid 24 - Rear Tool store Circular tool store anchored to the mobile gantry. Max load 96 kg

Condition: new, Year of construction: 2023, functionality: fully functional, DMC SD 30 RCS 110 - Automatic Wide Belt Sander Iodpfxow Rpf No Ad Uotp New ex-demo machine, under warranty, has not been used, unpacked from foil Technical Specifications: - Working width: 1,100 mm - Min./max. working thickness: 4/170 mm - Abrasive belt width: 1,115 mm - Abrasive belt length: 1,900 mm Configuration: - Equipped with 1 "R" unit (roller) and 2nd combined "CS" unit (roller/pad) - "C" version for RCS 110: • Pneumatic actuator activating the roller of the first "R" unit • Pneumatic actuator activating the roller of the second "CS" unit • MESAR electronic segmented pad with 20 sections • Electronic adjustment of the worktable height - Compliant with European safety regulations (CE standards) - R120/ steel calibration roller, 120 mm diameter, in first position - R140/65 – 65 Sh rubber grooved roller, 140 mm diameter, in second position - Electronic ammeter for the main motor to monitor power consumption - Electronic display of working thickness - Electronic oscillation of abrasive belts - Rubber pressure rollers - Vertical infeed roller on the first unit to prevent sudden ejection of workpieces - 60 Sh rubber feed belt - Infeed and outfeed support rollers (2 rollers each) - Automatic device for centering and tensioning of feed belt - Main motor power: 11 kW (2 speeds) - Oscillating nozzle system for blowing dust from the abrasive belts of the first and second unit with timer control - Variable feed belt speed via inverter: 0.75 kW (3.5–18 m/min) - “EYE-S” electronic programmer for machines with electronic segmented pads • 10'' touchscreen display

Condition: excellent (used), CATALOG NO. 7599 TECHNICAL DATA Iedpfxov R Um Ie Ad Uotp - Shaft width: 410mm - Number of knives: 4 pcs - Max thickness of processed element: 240mm - From above: - anti-kickback fingers - toothed feed roller, driven, swivel - pressure elements - planing shaft - pressure roller - smooth driven outfeed roller - Motor: 5.5kW - Electric brake - Manual table height adjustment - 2 feed speeds: 7,14m/min - Extraction port diameter: 120mm - Dimensions (L/W/H): 900x1030x1100mm - Weight: 350kg ADVANTAGES – Italian manufacture – Used thickness planer, very good condition Net price: 14,900 PLN Net price: 3,540 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Itjdpfxjvvi Hto Ad Uep Safety: Safety tread mats Storage location: Sonnefeld

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian-made - Year of production: 2007 - Combination pad (combi shoe) TECHNICAL SPECIFICATIONS: - Sanding width: 950 mm - Sanding height: 4-170 mm - Motor power: 7.5 kW - 1st unit: Steel roller with pneumatic lift - Roller diameter: 110 mm - 2nd unit: Combination pad (combi shoe) - Pneumatic lift for rubber roller: 78 Shore - Pad with pneumatic lift - Pneumatic oscillation - Air cleaning for sanding belts - Electric height adjustment - Two belt speeds: 8.3 m/s and 16 m/s - Electronic sanding height positioning - Feed speed, stepless adjustment: from 4-20 m/min - Minimum workpiece length: 500 mm - Extraction port diameter: 2 x 140 mm - Machine dimensions (L/W/H): 150 x 180 x 210 cm Ijdpfx Asxdxfqjd Ustp - Weight: ~1010 kg

Condition: used, Year of construction: 2004, Storage location: Nattheim Ijdpevvi Hyjfx Ad Uetp

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Itjdpfx Ajvvi N Ijd Usp

Condition: used, Year of construction: 1999, Storage location: Nattheim Isdpfxjvvi Rxs Ad Uotp

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Itjdpfovvi Scjx Ad Usp

Condition: used, Storage location: Nattheim Itodpfx Adswkirqo Uep