Used Sawdust Stoves for sale (227)

Condition: ready for operation (used), The conveyor is 13 meter in length with built in screen for sawdust separation. Width 600 mm. Gjdpfx Aozb U Hyjfksbn Metal detector included with electrical control cabinet.

Condition: excellent (used), Year of construction: 2002, heating capacity: 180 kW (244.73 HP), nominal heat output: 180 kW (244.73 HP), Nominal thermal output: 180 kW Power range: 45–180 kW Fuels: Wood chips (G20–G60) Sawdust Wood pellets Wood waste and chipboard scraps Permissible water content of the fuel: up to approx. 50% Combustion system: Double grate underfeed combustion Boiler type: Three-pass fire-tube boiler Fully refractory-lined combustion chamber Automatic ash removal Maximum supply temperature: 95 °C Maximum operating pressure: 6 bar Efficiency: approx. 85–91% Flue gas temperature: Full load: approx. 190 °C Partial load: approx. 130 °C CO emission: < 250 mg/m³ Dust emission: < 150 mg/m³ Gjdpfx Aozc Uu Tsfkebn NOx emission: < 100 mg/m³ (for softwood) Dimensions and weight Length: approx. 2,130 mm Width: approx. 1,180 mm Height: approx. 2,280 mm Weight: approx. 3,440 kg Flue gas outlet: Ø 250 mm Supply/return connection: DN 80 With Mawera RSS silo discharge system

Condition: used, mileage: 3,500 km, power: 120 kW (163.15 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment Double deep fryer Double sink 3-burner gas griddle 2-burner gas stove Refrigerator-freezer combination Beverage refrigerator Box body with snack kitchen Extractor hood * On-board computer * ESP (Electronic Stability Program) * Automatic climate control * Fog lights * Radio * Rain sensor * Power steering (CV) * Cruise control * Central locking with remote control Standard equipment Passenger airbag deactivatable, Drive type: front-wheel drive, Electrically adjustable exterior mirrors, Brake assist, Electronic Stability Program, Cruise control system, 6-speed gearbox, Automatic climate control, Light and rain sensor, Fog lights, Pollen filter, Radio USB, Gear shift indicator, Power steering, Start/stop system, Central locking Gedpsy Rwypjfx Afkebn

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm Godpfx Ajzbtq Rofksbn • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm Gjdpfxeiduhzs Afkjbn spindle speed 2800 rpm. engine power 2.2 kW air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: new, machine/vehicle number: 6750, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, number of seats: 3, Vehicle Description Fully equipped new food truck with a brand new kitchen. We offer flexible hire-purchase and leasing options. Please contact us. The vehicle is new and the kitchen has been built with great attention to detail. It is our mission to convert new and used vehicles into food trucks in accordance with regulations. Today, we are proud to say that our years of expertise have convinced our customers of the quality of our work. Visit us and experience the quality of our vehicles for yourself! Body construction made from isothermal aluminum-fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout the year. Permissible gross weight: 3,500 kg, Driving license class: B Emissions standard: Euro 6 Environmental badge: 4 (Green) Gbjdpfoy R S S Hjx Afkjn Parking sensors Summer tires Catering equipment, kitchen made from stainless steel Gas appliances: Gas fryer “Bertos”, 2 x 8-liter basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B Cooling options: Refrigerator with glass front, suitable for beverages Small under-counter refrigerator "Liebherr" Water system: Water installation with canisters, 30-liter capacity with fresh and waste water tanks Two stainless steel sinks with fittings Hygiene package with paper towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting: LED ceiling lighting LED ambient lighting with color effects around the sales hatch, remote-controlled Emergency light Additional equipment: Serving counter and work surfaces made of brushed stainless steel Fire-resistant insulation wall at the cooking area Extractor hood with labyrinth filters Slip-resistant gastronomy flooring Sneeze guard (optional) Built-in insulated generator cabinet We take care of all required paperwork (TÜV inspection and certification) Warranty: One-year warranty on body and kitchen Manufacturer’s warranty from Renault This model can of course be customized! Need a shorter or longer version of this model? Need different equipment for this sales vehicle? Does your equipment require a higher payload or additional sales hatches? You can determine many vehicle features yourself!

Year of construction: 2009, condition: used, Complete Cermaic production factory for sale ! Factory consists : 1 GLAZING ROBOT GAIOTTO GA2000, MODEL RAG-GA2000 AXES in 2007 2 STOVE TURBO COMPACT MC 16, MODEL MC16 SAFF FORNI, in 2006 3 STOVE TURBO COMPACT 12F, MODEL MC12, SAFF FORNI, in 2006 4 DRYER JULIUS LIPPERT, MODEL KTRO, in 1972 5 PRESS GEBER NETZCH VPPS, in 1972 6 BATTERY MOLDING BLOWTHERM, MODEL IH/AR 125, in 2010 7 PRESS PALAZZETTI - VICENTINI, MODEL HPO 1400 in 2006 8 CHAMBER FURNACE SAFF - TURBO COMPACT 25M3, MODEL 25M3 SAFF FORNI, in 2007 9 GAIOTTO GA 900 GLAZING ROBOT, MODEL GA 900 EV, in 200 10 BRAGANTI DRYER 11 MODEL MCZ FOR THE PRES 1 DRYER SPANISH SACMI, MODELSACMI RRL 90 in 1999 2 AUTOMATIC GLAZING LINE (EN.CO), in 2013 3 SACMI HYDRAULIC PRESS, MODEL PH 557, in 1992 4 RULI FURNACE KEMAC EK 17, MODEL EK 17, in 1999 5 CHAMBER FURNACE SAFF FORNI TURBOCOMPACT 16MC, in1996 6 CUTTING TABLE FORNATON, in2012 7 BRICK TRANSPORT TROLLEY 8 CHAMBER FURNACE TURBO METANO 12M3, MODEL TURBO, 2006 9 HOLZKRAFT KSO 1500 WOOD GRINDER, MODEL KSO 1500, in1993 10 BRA CUTTER 1 PRODUCTION LINE FOR FIRE MAT.TECHNOLOGY OF DRY PRESSING in 1980 2 DRY PRESSING PRESS LAEIS HPF 400, MODEL HPF 400, 3 FURNACE REIDHAMMER HWU 10, MODEL HWU 10: 4 MIXER FOR MIXTURE PREPARATION Gbodpfxszbtvas Afkon 5 MIXTURE CONVEYOR TO PRESS 6 HYDRAULIC LIFT PLATFORM

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Year of construction: 2002 Condition: very good Hablamos español Nous parlons français We speak English Gjdpfx Afsu D Udwjkjbn

Condition: new, Year of construction: 2025, Salmatec - Remetec Pellet Plant Complete Pellet Production Line The heart of the pellet plant is the Salmatec Maxima 500 pellet mill, featuring a throughput capacity of 2 tons per hour. The plant includes: 1) Drying Section: - Belt dryer - Dosing hopper and screw conveyors with hot water up to 105°C 2) Milling Section: - Rematec dry hammer mill with a throughput capacity of 3.5 tons per hour - Dosing hopper - Screw conveyor 3) Pelletizing Section: - SALMATEC Maxima 500 with 2x75 kW motors, throughput capacity 2 t/h - 9 m³ dry sawdust silo - Conditioner with water dosing system - Screw conveyors 4) Cooled Pellet Storage: - 2 silos for cooled pellets – total storage capacity 12 tons of wood pellets - Belt conveyor - Vibrating sifter 5) Packaging Line: - VAI vertical open-mouth bagging machine with a throughput of 5 t/h - Belt conveyor - Vibrating sifter 6) Palletizing: - ABB robotic palletizer with 6 pallet stations 7) Electrical Cabinet: - Main electrical cabinet with conditioner - Wiring cables - PLC control system 8) Optional Equipment Offered: - Biomass boiler for hot water up to 95°C, with a power capacity of up to 1 MW - Secondary heating circuit with plate heat exchanger and PLC control cabinet Gbodpoza Eivjfx Afken The pellet plant is currently in operation. Inspection and testing can be arranged during working days. The plant is fully automated, all equipment is interconnected and operated by a single person. The final sale price is very attractive.

Condition: excellent (used), F.lli Ferrari extraction system Chip and sawdust extraction with fan, control cabinet and rotary airlock valve. Fan: F.lli Ferrari, year of manufacture 2002. Gsdeyh I A Eepfx Afkjbn Fan motor: 22 kW. Fan capacity approx. 22,000 m3/h. The extraction unit is equipped with bag filters and a bag cleaning system. External dimensions: width 385 cm, depth 240 cm, height 580 cm.

Condition: reconditioned (used), Year of construction: 2009, briquette diameter: 100 mm, 3 × Di Più MB100 Briquette Press – Year of Manufacture 2009 – Complete System with Saws & Accessories For sale are 3 Di Più MB100 briquette presses, year of manufacture 2009, including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical Data (per machine): Type: Di Più BRIK MB100 Year of Manufacture: 2009 Briquette Diameter: approx. 90 – 110 mm Production Capacity: approx. 1,300 – 2,300 kg/h Pressing Pressure: approx. 2,000 – 2,500 kg/cm² Main Motor: 75 kW Total Power: approx. 98 kW Material Moisture: optimal 8 – 12 % Gsdpfxszazh Ie Afkebn Particle Size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press --- Equipment: Material hopper Conveying screws Hydraulic system Control cabinets Saws for cutting briquettes to length Protective covers & safety systems Discharge units --- Scope of Delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application Areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: upon request Transport: organization possible by arrangement Price: upon request Individual sale or complete package possible

Condition: excellent (used), mileage: 1,096,713 km, first registration: 10/2015, fuel type: diesel, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, second fuel tank, spoiler, = Additional options and accessories = - Air suspension - Aluminum fuel tank - Low noise - Remote central locking - Roof Spoiler - Sleeping cabin - Spoilers - Stove Godpfsymr Avsx Afkebn = Remarks = WMA06XZZ8GM689106 = More information = Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Gbsdpfjuc Unqex Afkjn Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: new, Year of construction: 2025, Furnace Output: 34 kW Working Output: 29 kW New Device: yes, original packaging Warm air blower, flue gas blower, control unit with digital display: included Gjdpfxok Utras Afkebn Warm air delivery pipes: 2 x 180 mm with freely rotatable, plug-in 90° bends Flue outlet diameter: 160 mm Furnace length: 500 mm Furnace width: 400 mm Furnace height: 590 mm Air delivery: 2,200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air delivery pipes: 1,560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Weight: 190 kg

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Gbodjy Sixtepfx Afken Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips Gbjdpfxjy Sixms Afkon

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Gedpoyr Tpnsfx Afkjbn

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Gsdpeyr I Huofx Afkebn Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises. Gbodsyr I Hnspfx Afkon

Condition: ready for operation (used), Year of construction: 1999, operating hours: 123 h, power: 550 kW (747.79 HP), nominal heat output: 550 kW (747.79 HP), Manufacturer: MAWERA Type: WR550 Year of construction: 1999 Rated thermal output: 550 kW Fuel: Wood chips, sawdust, residual wood, bark, biomass Combustion system: Traveling grate furnace / moving grate Condition: used, functional Gsdpey U Ru Uefx Afkjbn Description: The MAWERA WR550 is a fully automatic biomass heating system for continuous industrial operation. The system was specifically designed for the economical combustion of wood chips and wood-based fuels with varying moisture content. The robust traveling grate system ensures even fuel feed and stable, efficient combustion. Thanks to its solid steel construction and industrial design, the system is particularly suitable for sawmills, wood processing companies, district heating plants, and industrial heating systems. Technical equipment: • Fully automatic fuel feed • Moving traveling grate for different fuel qualities • Automatic ash removal • Hydraulic or mechanical grate drive • Fire-resistant lining of the combustion chamber • Control via control cabinet Application areas: • Sawmills • Wood industry • Agricultural operations • Commercial and industrial halls • District heating • Drying plants Accessories: • Discharge systems, hydraulic, with push rods SST! Complete system • Cyclone separator • Conveyor screws • Hydraulic unit • Flue gas fan Inspection possible by appointment while still in operation. Subject to technical changes and prior sale.

Condition: used, Year of construction: 2017, operating hours: 2,000 h, Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. Gjdpfx Aowa Tnzsfksbn • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. • We designed our labeling system, in such a way as to guarantee the maximum laying precision, on each type of bottle. Lines B6 Can Be Composed By The Following Machine Parts: 10 place rinsing machines uses water from the aqueduct or recyclable liquid. (In this case you can add a recycling unit consisting of a pump) 5 micron filters and liquid storage tank. 10 place blow molding machines, as an alternative to the rinsing machine, if the bottle cannot be wet before filling. The blowing machine allows you to blow prepared air or nitrogen inside the bottle. 10 nozzle fillers. Depending on the type of product. Different types of filling can be used and specifically:  Vacuum in the bottle; (for oils, syrups, spirits or when you want a quick filling). By gravity, with initial slight depression (for wine or foamy liquids). Pressure (for PET bottles or for particular liquids). Automatic washing system inside the filler – Used filling monoblock POLARIS Leveler: which allows obtaining the legal content, It is possible to change the bottle format without changing the nozzle thickness. Capper that can apply various types of caps: screw, pressure, mushroom and Guala etc. To change the type of cap, it is necessary to change a capper accessory. Heat shrink or foil capsule dispenser. For the restriction of the retractable capsules, a restriction stove equip the line for the closure of the foil capsules, and mount rolling heads. Labeling machines for the application of self-adhesive labels on the front, back on the neck or other parts of the bottle. Operational heads for the application of fiscal seals both with paper and glue and self-adhesive L to U, side. Thermal transfer stamp for printing dates of reads and lot numbers on the back label or an ink jet marker, laser, can be applied. Accident prevention protections according to CE standards with doors or electronic barriers. All materials in contact with the product are for food use as per CE regulations. In addition, you can add other equipment to carry out further operations, such as: Equipment for other types of caps.

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute Gbedpfx Asyzr Tfsfksn - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2017, condition: good (used), functionality: fully functional, This belt drier is currently in light use and is available for viewing in operation. It has mainly been used for drying sawdust, with some usage for cereals. The equipment is in perfect condition, maintained and operated by its original builders. Key Features: Throughput Capacity: 10-50 tonnes per hour Allows 500kW of constant chilled output 24/7 Gbsdpfxoun Nm Hj Afken Energy Efficient: Runs at just 20-25kW Versatile Applications: Ideal for drying woodchips, sawdust, grain, and biomass Included: I75kw centrifugal fan Includes digital speed drive. Heat exchangers 2 x existing secondary heat exchangers mounted horizontally 3 new (second hand) heatex as shown onsite Intake chain feeder Spinning paddle centrally located Control board Variable speed belt Variables peed fan system (runs at 20kw for 400kw) variable seed intake chain drag

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 3 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW WATERPROOF HOIST CONTAINER WITH FIXED ROOF FOR SAWDUST AND SINGLE REAR DOOR WITH VENTS, FLOOR SUPPORTED BY 200 MM BEAMS AND SIDE INSPECTION SPYHOLE REF: 23-N-29 TYPE: for fine dust/sawdust C NEW: yes LID: yes OPENING: single door OVERALL DIMENSIONS TOTAL LENGTH: 6.25 m EXTERNAL WIDTH OF THE BODY: 2.50 m HEIGHT: 2.65 m MC: 30 WEIGHT: 2730 Gbsdpovm Ep Sofx Afksn BOTTOM: 4 mm WALL: 3 mm COLOUR: greyThe prices shown do not include VAT. please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: new, Year of construction: 2024, functionality: fully functional, feed length X-axis: 6,000 mm, feed rate X-axis: 3 m/min, total length: 10,278 mm, total height: 3,005 mm, total width: 2,695 mm, overall weight: 6,800 kg, power: 262 kW (356.22 HP), type of input current: three-phase, UMG-412.03 Log crusher – a device designed for crushing wood logs into technological sawdust, which is most often used in the production of wood pellets. The device has a drum with a diameter of 800mm with 458 units of carbide teeth. The drum is driven by a 250kW electric motor, which ensures high performance. Hydraulic motor-driven intake rollers and a chain feed conveyor evenly feed and support the logs during grinding. The device grinds the logs into technological sawdust, which is blown out through the exhaust opening, the remaining sawdust is removed from under the machine by a belt conveyor. The feed speed is adjustable from 1.35 m/min to 4.3 m/min Gbedeu Nh S Eepfx Afkjn