Used Sawdust Stoves for sale (251)

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) Gtsdpfx Aofmqq Ejfnou each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net Gtedpfx Aoff Sbisfnju -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Gjdpfx Afj E Dquenetu Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Gsdpsxz Eg Nefx Afnstu Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Year of construction: 2012, condition: good (used), Complete dust drying line up to 6t/h including: - Drum Drayer Instalmec CT40 - Sawdust furnace 5MW with gas mixing chamber - Moving floor rawmaterial storage Rc9Tv - Disk screen for big particles Gtjdjvu Dq Repfx Afneu - Intermediate bin 6m3 before drum - Rotating valve - Main Fan 160kW - Fuel storage and conveyor

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Condition - fully functional. Gsdpfxovx S Hno Afnstu

Condition: used, Year of construction: 2007, functionality: fully functional, power: 320 kW (435.08 HP), total width: 2,780 mm, total length: 3,340 mm, total height: 2,560 mm, Equipment: documentation/manual, Fröling wood chip and pellet boiler "Turbomat" 320 kW Year of manufacture: 2007 Completely overhauled and newly lined with refractory bricks in 2019 Comes with electrical control panel, with the option for automatic error reporting via app. Dimensions: see images Gtjdpfx Afjxb Erfonsu Wood chips, biomass, pellets, heating system, pellet heating, carpentry chips, carpenter, joinery, wood shavings, sawdust. Cleaning springs for the heat exchanger base have been removed but are included as new spare parts. Does not include silo discharge system, but does include drop chute and rotary valve. Chimney with induced draft fans, chimney with 35 cm diameter included. Riser flue not included. Has always been maintained and is in good condition. The system can be transported out of the building at ground level. No guarantee or warranty.

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW Gsdpfxex Dkyyo Afnstu - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: like new (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, year of last overhaul: 2024, protection type (IP code): IP54, Briquetting Press RUF 400 COMPLETE BRIQUETTING LINE AVAILABLE FOR PURCHASE: Drum sawdust dryer Feed auger Belt conveyor – 2 pcs Gtedpfx Afoxu Ryusneu Separator with hopper Screw conveyor – 6 pcs Wet sawdust storage bin Fuel storage bin Wood waste boiler Wood waste crusher Extraction fan with cyclone Packing machine with compressor Additional photos and information available upon serious inquiry.

Condition: new, Year of construction: 2025, functionality: fully functional, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. We look forward to hearing from you and implementing your ideas together! Example: KM Pro Gjdpfxstxcpws Afnstu KM Pro electric chamber oven Heating type electric Air circulation Heating capacity 30kW Circulating air motor 3kW Insulated up to 250°C Connected load 380-400V, 34kW Floor insulation 100mm Insulation walls 150mm (highly compressed) External dimensions : 3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side Working dimension (inside) 3100mm (L) x 1200mm (W) x 1880m (H) Height due to the low-lying rails ≠ 2000mm Equipment - Double-wing door, incl. door bolt and handle - Adjustable air slats (optimum air circulation regulation) - 2 pcs. Heating coil - 2 PT 100 temperature sensors (top and bottom) - Exhaust air throttle flap, manual adjustment (exhaust air regulation) - 2 rails on the oven ceiling - Walls made of galvanized sheet steel Control system : - Rittal control cabinet - Hitachi panel 7 inch (touch operation) - Control via Hitachi PLC - Speed control of the air circulation motor via frequency converter, with braking resistor - Emergency off - Adjustable control power of the heating coil (if current peaks are reached, you can regulate the oven down) - GELLING function for stoving different colors in one oven (air circulation motor is throttled over a period of time) - OPEN-DOOR function regulates the air circulation downwards when the door is opened. So you have less heat loss - Traffic light to indicate the respective status. - STAY-HOME-WARM-UP is a time-controlled switch-on of the oven. This allows you to start the oven before starting work. - SEE-TEMP shows the temperature curve of the oven. This allows you to check the temperature. - GO-HOME-LEAN-BACK switches the oven off via a time control.

Condition: excellent (used), briquette diameter 65mm sawdust level probe in the hopper Gtjdovx Anpjpfx Afnju diameter of hopper 1000mm year of production 2001 power supply 380V

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Gtsdpstw Szasfx Afnju Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder Gedpfx Aowh U Dmsfnetu  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: good (used), Year of construction: 1998, functionality: fully functional, power: 400 kW (543.85 HP), Equipment: type plate available, We are selling our 400 Kw boiler. We used it to supply our drying chambers with heat. As we no longer have these, the boiler is no longer necessary for us. The boiler also includes - Moving floor - Entry - Boiler - Ash conveyor including container - Various pipework - Heating control Gtodpfx Afsq U R Sgonou Price is exclusive of 20% VAT, ex works, exclusive of dismantling, loading, contract preparation and customs clearance costs. The stove can of course be inspected by appointment. As heat acceptance is no longer possible, firing/demonstration is also no longer possible. Due to the construction of the building, it will probably only be possible to remove the boiler via the roof. The boiler was checked by a specialist company on June 05, 2024! The boiler is ready for use and fully functional.

Condition: ready for operation (used), Technical characteristics Used boiler Compte-R Type CFC 1000 Control cabinet Thermostats, aquastats, thermometers and probes Chip feeder Gtedot U Ugxepfx Afnju Injection fan Dust collector Fan Connection hopper Thermal power of 990 kW Suitable for the combustion of sawdust and shavings from carpentry and for use in a workshop heating system Power and Motors Pluging: Three-phased Overall dimensions

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Bongard deck oven Orion (electric), type 602/4.160 (approx. 8 m²), year of manufacture end of 2021, has only been used for approx. 3.5 years, incl. loader / loading table (manually height-adjustable, for left and right), 4 decks 120 x 160 cm, each with approx. 18 cm interior height or approx. 23 cm for the top oven, with Bongard "Intuitive" computer control of the current design. Electrical connected load: approx. 52 kW / 100 A 380 / 400 V. Including steam function for excellent baking results. Gtodpfx Afjxzr Duonsu Dimensions: Outside: approx. 188 cm width + 2 x 10 cm for loader (left and right), depth: approx. 265 cm, height: approx. 225 cm + 35 cm for steam fan, total weight: approx. 2.5 tonnes Space under loader in top position: approx. 190 to 215 cm The oven was professionally installed and commissioned by the local authorised dealer at the end of 2021. Sufficient space and a large door opening of approx. 190 x 220 cm are available for dismantling. This can be reached at ground level by van / lorry. The loader and the outer panelling including insulation must be removed during dismantling, the oven core can remain in one piece. In any case, the stove should be carefully dismantled by a specialist and the dismantling should also be documented by labelling, photos, etc., ideally by the person who will later reassemble and commission the oven. This must be organised by the buyer. The original documents, drawings etc. are available. We will be happy to send you technical data sheets and further photos. The new price was over 60,000 EUR net.

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. engine power 2.2 kW Gtedpjiduhzsfx Afnou air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. Gtjdpfxjt Hagns Afneu The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2026, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12 Gtedovuf Tmjpfx Afnou

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Gtedpfxsx Agpzj Afneu Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2026, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Gjdpfx Ajvu Atwofnstu Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: new, Year of construction: 2026, functionality: fully functional, Vacuum air-flow perfectly sucks out excess sawdust produced during machining wood. Extractor equipped with an extracting connector rotary 180°. Machine features For chips from milling machines, planers and saws High suction power Easy relocating due to the drive system Rotor and metal body Quick attachment system for filter and bag Extracting connector can be rotated 180° simplifying attaching suction hoses Technical data Engine 1.5 kW/400V Godpfsvu Ayksx Afnstu Speed 2850 rpm Bags capacity (Diameter / Length) 190 L (500 mm / 1100 mm) Maximum efficiency 3200 m3/h Intake connector 150 mm/ 3×100 mm Rotor diameter 300 mm Dimensions 985×560×2210 mm Weight 45 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 7500 m3/h Gtsdpovuqyrjfx Afnou INLET DIAMETER 250 mm OUTLET DIAMETER 250 mm ROTATIONS 2850 obr/min DIMENSIONS 670 x 600 x 600 mm MOTOR POWER/VOLTAGE 4,0 kW/400 V WEIGHT 53 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, Gtjdpfjvugrdjx Afnsu manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm Gtedpfxsvzqtxs Afnsu WEIGHT 306 kg Manufacturer: Cormak