Used Sandblaster for sale (273)

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, The Glöckner K 225.5 circular cooler is particularly suitable for the animal feed, chemical and food industries. The round cooler has been completely overhauled. Rcodpfxetqt Uts Aa Eek Dimensions: diameter 2,250mm; height 4,000mm. Throughput: approx. 2,500kg/h; inlet moisture: approx. 10%; bulk density: approx. 650kg/cbm; inlet temperature: 50 degrees; outlet temperature: ambient + 3 degrees; size of pellets: approx. 10mm The cooler consists of 5 cooling decks, with round lids and made of stainless steel. Inlet housing with adjustable baffles, mild steel housing, stainless steel baffles. Even product distribution through distributor rakes. Stainless steel on each sieve deck. Stainless steel baffle plates for optimum product guidance. Sieve segments made of stainless steel; perforation 3-5 mm. Material of the complete cooler made of mild steel, sandblasted, primed and painted. Direct drive by frequency-controlled gear motor, max. 0.55 kW. Non-contact door safety switch. One inductive proximity switch per deck to switch off in the event of overload. Sensor for monitoring the layer height. Drawing available. Control: Attached terminal box for wiring. Connection to on-site control system.

Condition: excellent (used), Year of construction: 2008, Blast house, blast cabinet, sandblasting system Accessible by forklift truck There are two cabinets, one for black steel and one for stainless steel. Complete with filter unit and recovery system Viewing is recommended. Rjdpsx Nm E Esfx Aa Eeck

Condition: like new (used), Year of construction: 2022, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 13322, Edge grinding machine for straight edges model MUSAnext for processing natural stone Grinding and polishing of straight edges with upper and lower chamfers, Calibration and regrinding of workpiece surfaces, Milling of water grooves and grooves on the face, Milling of half or quarter round bar profiles Torsion-resistant steel frame as a monoblock for installation on a stable hall floor Sandblasted machine frame, cathodically galvanized, primed with epoxy zinc paint and painted with polyacrylic paint Electrical control cabinet integrated into the machine frame Machine components painted using the cataphoresis process for optimum corrosion protection Stainless steel splash guards Service water drip tray with side drains Automatic central grease lubrication 2 water valves for automatically controlled water supply for end faces and bevel grinding supports Conveyor belt with wedge for precise longitudinal guidance, width 600 mm Conveyor belt support on the machine frame made of stainless steel Adjustable conveyor belt speed 0 - 250 cm/min on the operator panel Dynamic conveyor belt speed for increased feed rate when feeding in and out workpieces Flushing device for inside and outside of conveyor belt Workpiece stop roller bar at the belt infeed for precise alignment of the workpieces Belt running direction from left to right Table working height 780 mm Table extension console can be swiveled manually, rollers offset in two rows arranged with additional extension of 1.5 meters Pneumatically height-adjustable workpiece pressure rollers, which enable processing of different workpiece thicknesses without additional manual adjustments Operator panel with 8" touchscreen Programming of switch-on and switch-off times for each support Programmable machining length of end faces and chamfers Workpiece length measurement with automatic spiral step system Magnetic sensor for detecting the workpiece thickness, for automatic positioning of each support with automatic height adjustment MAT sensor for cross reinforcements, automatically detects the height and number of cross reinforcements and controls the pneumatic pressure cylinders Rjdpfotzp T Hex Aa Ejck

Condition: used, machine/vehicle number: WSK0000000125xxxx, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 21993 Specifications: EU approved until 16.10.2026 Model year 2010 Air suspension Tyres (see pictures) Length: 520 cm Width: 250 cm Wheelbase: 136 cm Curb weight: 2,600 kg Maximum payload: 15,400 kg Description:Schmitz 2-axle dolly.Approved until October 2026.Sandblasted 3–4 years ago.Can be delivered at short notice. Technical approved: Yes EU-approved until: 16.10.2026 Own weight: 2600 Total Weight: 18000 Payload: 15400 Rcjdpfex Eg Icox Aa Ejk Width: 250 Length: 520 Model: Cargobull 2-akslet dolly

Condition: good (used), functionality: fully functional, “Steinert NES 100 220 E 5009” for Sale Manufacturer: Steinert Rsdjxb S Srepfx Aa Eeck Type: NES 100 220 E 5009 Belt widthness: 1.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Internal reference number for inquiries: 5-043 MAN TGS 35.540 8x2H-6 BL with flatbed body and Palfinger PK92002-SH loading crane including JIB and winch Vehicle: Technical weights: - Permissible gross combination weight: 48,000 kg - Gross vehicle weight: 32,000 kg - Front axle load: 9,000 kg - Front axle load: 29,000 kg - Rear axle load: 12,000 kg - Trailing axle: 8,000 kg - Main wheelbase: 3,505 mm - Fuel tank volume: 390 l - RINGFEDER type RF40/G150A (40mm) - MAN D2676 LFBI diesel engine, 397 kW (540 hp), 2,650 Nm torque, Euro 6e - MAN TipMatic 12.28 OD - Gearbox-dependent PTO, continuous operation Rcodpfx Asxnnyfsa Eek - MAN EfficientRoll transmission function - Rocking-free transmission function - High-performance engine brake MAN PriTarder with MAN EVBec, multi-stage - MAN HydroDrive, hydrostatic axle drive on second axle - Trailing axle (rearmost axle), non-driven, steered, liftable - Driver's cab TM: the comfortable (narrow, long, medium-high) - LED Package Plus: headlights, fog lights, cornering lights - 2 air horns on cab roof - All-round LED beacons, yellow, with function monitoring - Mirror package: electric heated, adjustable exterior mirrors, front mirror, kerbside mirror right - Multifunctional leather steering wheel, height and tilt adjustable - Air conditioning, Climatronic - Additional water heater, 4 kW - Retractable fridge and drawer, middle and rear section - Cruise control (speed regulator) - Traffic sign recognition - Turning assistance system - Emergency brake assistant EBA Plus - Lane departure warning LDW - Reversing Motion System - Pre-installation for alcohol interlock, not bypassable - MAN Media System Professional navigation 12.3" - MAN Advanced sound system with subwoofer and much more. PAVIC flatbed for building materials - Flatbed internal dimensions: 5,200 x 2,480 x 600 mm - Mounted on subframe - Lashing points along the side frame profile every 280 mm - Floor made of 27mm anti-slip plywood - Front wall, drop sides, and tailgate made of aluminum, 25mm - Front wall height = 1,000mm, including uprights - Front wall with full-width toolbox, side doors left/right, 2 work lights mounted on the front wall - Two-section sideboards, foldable and removable, with rubber bump stop - Tailgate with hydraulic extension, 1,000 mm - Drop side locks - Aluminum forklift collision protection fitted to edge profile - Made of steel sheet, sandblasted and painted - Flatbed edging and uprights painted in RAL standard color - Outside drop sides painted in RAL standard color or natural anodized aluminum - Container locks: 4 pcs. (2 installed inside flatbed, 2 on tailgate console) - Hydraulically extendable underrun protection (brand: Guima), electrical installation, painting in RAL standard color Palfinger PK92002-SH with JIB and winch - G – Hydr. eightfold extension - Two slewing drives - Hydraulic, long outriggers - Outriggers hydraulically pivoting 180° - Remote-controlled support, 8+2 elements - Transport position monitoring for stabilizers - Support intelligence - Stability system HPSC - HPSC-Plus loading module - HPSC additional function front/stabilizer leg - HPSC additional function rear/stabilizer leg - Palfinger Connected - Flow sharing - Crane transport position monitoring - Frame overload protection - Active oscillation damping system AOSP-FOLD – folding assistant - Paltronic 150 - Preparation for hose equipment "Code 4" - Hose equipment for two additional attachments - MULTI1 – quick coupler

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Redowv Tzaspfx Aa Eeck Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Year of construction: 2025, condition: new, Sandblasting cabin for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside 2 large side doors for loading and unloading from both sides, also for longer workpieces Integrated exhaust system with replaceable air filter Control of the air flow via foot pedal 2 blasting guns: one fixed and one freely movable blasting gun 3 separate switches for on/off, suction and cabin lighting 2 fluorescent tubes (230 Volt), in separate housing with protective screen and replaceable protective foil, including 5 spare foils regulation of the working pressure via pressure regulator with manometer Scope of delivery: Rsdpfx Aascqm Rre Esck High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4 / 5 / 6 / 7 mm) Incl. 5 pieces of replacement foils for S

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 Rsdpfxjqcyzws Aa Eeck -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Year of construction: 2024, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21861 Specifications: 2024 model 0 hours Not used 380 volts/ 50Hz Ready for delivery Description: We have a 2024 Endustri GM dust filter for sandblasting for sale. Rsdpfx Aoxyptkoa Eock Everything works as it should and above all it is like new. It has not been used. Ready for delivery Own weight: 1 Model: GM støvfilter for sandblåsing

Condition: good (used), functionality: fully functional, 2 Pcs. “Steinert NES 200 220 E 5009” for Sale Manufacturer: Steinert Type: NES 200 220 E 5009 Belt widthness: 2.000 mm (New belt) Rsdexb Tbzjpfx Aa Eeck With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 1693/IMMEDIATELY AVAILABLE ---- MAN TGS 26.400 6x4 three-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic fourfold extension, 12.7 m * e-dynamic hose equipment for 2 additional attachments * Slewing range 400° * Double linkage system with PROLINK (over-bending knuckle boom up to 15°) * Electronic overload protection with FX 500 * FASSI stability control FSC including LMB II * Fassi RCS radio remote control maxi - 6 functions with 3 joysticks (2-2-2) * Special outrigger, support span 6.64 m, hydraulically extendable including FSC * Supports operable via remote control * FL system (Full Lift), selectable fast stroke valve for the extensions * LED work lights Vehicle: * MAN diesel engine, 353 kW (480 hp), 1,800 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * 6x4 drive * Leaf/air suspension * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank volume, 60 l AdBlue tank volume * Full brake assist * MAN EVBec high-performance engine brake, graduated * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling RINGFEDER type 4040/G150A * NN cab: the practical one (narrow, medium-length, standard height) * Mechanical lift roof * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * MAN EasyControl operating panel, 4 functions, operable from outside with door open * Electrically operated sunblind for front window (internal) * Refrigerator box * MAN SmartSelect infotainment control with touchpad and direct entry buttons * MAN Media System Navigation Advanced 7 inch * MAN Sound System Advanced * Navigation map Europe and Russia * Online traffic for navigation function * Standard drive train extended warranty for 3rd year of operation up to 450,000 km, conditions according to maintenance log Rcjdpfx Aaexnnupe Eok Body: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with premium features: radio remote control, hydraulic outriggers with remote operation, work lights, etc.) Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternatively also available: load area length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Subframe: Subframe as robust steel welded structure, two longitudinal beams with crossmembers supporting the 5-mm thick tipper profile and the 4-mm floor plate made from Hardox or Naxtra. A 1,000-mm high steel front wall, fixed, with 2 lashing rings inside, each positioned towards the edge at mid-height. Fixed corner stanchions with bottom locks. Rear and side walls (one-piece, full length) made from aluminium hollow profiles, side walls foldable and swinging with sideboard lifting assist. Rear flap also foldable and swing-mounted, with central locking integrated in the tipper profile. Floor plate made of Hardox or Naxtra 4 mm thick, precisely welded to the tipper profile and the longitudinal/crossmembers. Press traverse and tipping pivot integrated and reinforced within the longitudinal beams. Lashing eyes (4 per side) arranged along the outer tipper floor. Steel construction in grade St 52-3. All steel parts sandblasted; add-on parts painted or powder-coated in RAL 9016 (pure white).

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: Rcsdpfxeqcuvwe Aa Esk SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, functionality: fully functional, Machine Type: Vapormatt Vapormate Manufacturer: Vapormatt The Vapormate is our highly versatile, manual entry-level system. It is a very popular choice for users who need a compact unit for smaller spaces or want to test the wet blasting process before investing in a larger system. The Vapormate comes equipped with all the features you would expect from one of our larger manual systems. The wet blasting process was invented by Vapormatt in the 1950s. Over more than 70 years of ongoing development in wet blasting, an ergonomic and cost-effective system has emerged—the Vapormate. The integrated water recirculation system ensures efficient use of consumables. Rodpfjtqml Tsx Aa Ejck Thanks to water as the carrier medium, wet blasting enables gentler and more uniform processing than, for example, sandblasting. With this technology, you can achieve smooth and even surfaces on your parts. Further technical information can be found in the attached brochure. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The unit may be shown in the photos with optional accessories, which are available separately and subject to additional costs. The quoted price refers to the base machine only. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you about our general terms and conditions, legal notice, and the right of withdrawal before any purchase/contract conclusion takes place.

Condition: new, functionality: fully functional, power: 15.5 kW (21.07 HP), fuel type: gasoline, color: yellow, operation weight: 205 kg, Year of construction: 2025, Kaeser Mobilair M17 Construction Compressor, NEW! Max. operating pressure 15 bar, flow rate 1 m³/min. Honda petrol engine GX 630 with 15.5 kW, 20 l tank, Compressed air connection 1 x G 1/2, operating weight 205 kg, Transport frame with carrying handles, Aftercooler and condensate separator including connection lines. Rsdpfx Asx Alaroa Eock Other sizes available on request! Machine location: Warehouse D-46514 Schermbeck. _____ Buy Kaeser M17 Compressor | Mobilair M 17 new | mobile construction compressor 15 bar | Kaeser compressor Honda GX 630 | portable screw compressor | Kaeser 1000 l/min petrol | mobile compressed air compressor for construction site | Kaeser petrol compressor | Compressor with aftercooler | Transportable construction compressor | Kaeser M17 immediately available Benefits & Highlights: -Compact mobile screw compressor – ideal for changing work sites -Autonomous operation thanks to Honda petrol engine – no power connection required -Robust steel frame with carrying handles – easy to load & transport -Optimal compressed air treatment thanks to aftercooler & condensate separator -Ideal for air-powered tools, sandblasting, construction site operation -Easy maintenance & reliable – proven Kaeser quality -Very low noise levels due to sound-insulated compressor housing Fields of application: -Road and civil engineering -Fiber optic technology -Municipal building yards -Trades & commercial operations -Industrial applications -Independent compressed air supply (e.g. on sites without electricity) -For pneumatic tools, impact wrenches, demolition hammers, sandblasting, etc.

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Manufacturer: Steinert Type: NES 125 220 E 5009 Belt widthness: 1.250 mm (New belt) With new control-unit. Redpsxb S Exsfx Aa Esck Overhauled, balanced, sandblasted and painted.

Condition: new, power: 350 kW (475.87 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, tail-lift, Internal reference number for customer inquiries: 3-374----Mercedes Benz Arocs 3348 AK 6x6 tipper with crane, equipped with a Fassi F195A.2.24 crane Mercedes Benz diesel engine model OM471, inline 6, 12.8 L, 350 KW (476 HP), 2300 NM, 3rd generation OM471 engine * Automatic transmission, gearbox G 330-12/11.63-0.77, MERCEDES POWERSHIFT 3 * OFFROAD driving program * 6x6 drive * Suspension: leaf/air * Differential locks on powered rear axles * Wheelbase 3600 mm * Fuel tank capacity 290L, AdBlue tank 60L * DRUM BRAKES on front and rear axles * ELECTRONIC BRAKE SYSTEM WITH ABS AND ASR * ABS, SWITCHABLE * PARKING BRAKE, ADDITIONAL ON FRONT AXLE * M-CAB CLASSICSPACE, 2.30 m width, 320 mm tunnel * FLOOR DESIGN, 320 mm tunnel * CAB WIDTH 2.30 m * CAB, 600 mm mounting height * CAB REAR WALL WITH WINDOW * CAB TILTING DEVICE, MECHANICAL-HYDRAULIC * ROOF HATCH/ROOF VENTILATION FLAP * DRIVER AIR SUSPENSION COMFORT SEAT * DIGITAL TACHOGRAPH, 2nd GENERATION, ADR * MULTIMEDIA COCKPIT, INTERACTIVE * NAVIGATION SYSTEM * 24 V/15 A SOCKET IN FRONT PASSENGER FOOTWELL * HOT WATER AUXILIARY HEATER (CAB) * AIR CONDITIONING * AIR CONNECTION IN CAB * 2-WAY SPEAKER SYSTEM 3-way tipper body with Fassi F195A.2.24 crane mounted directly behind the cab (Crane with top features: radio remote control, hydraulic outriggers with radio operation, work lights, etc.) * Cargo area length: 4800 mm * Cargo area width: 2420 mm * Cargo area height: 800 mm Subframe: Sturdy welded steel construction with two longitudinal beams and crossmembers to support the 5 mm thick tipper profile and the 4 mm base plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall with 2 round lashing eyes inside, on the outside at mid-height. Fixed corner stakes with lower locks. Tailgate and side walls (one-piece, full length) made from aluminum hollow profiles; side walls foldable and swinging with board lifting aids. Tailgate also foldable and swinging, with central locking integrated into the tipper section. Floor plate made from 4 mm Hardox or Naxtra, neatly welded with the tipper profile and longitudinal/crossmembers. Press traverse and tipping outrigger sunken and reinforced in the longitudinal beams. Lashing eyes (4 per side) recessed in the outer tipper floor over the length. Steel construction in St 52-3. All steel parts sandblasted, superstructure parts finished in RAL 9016 (single color) painted or powder coated. Subframe: Subframe designed to hold front and rear tipper outriggers, with press traverse and crossbeams. In crane mount area, closed as box section with side crane mounting plates. Existing plastic mudguards on vehicle will be utilized and, if needed, modified. Hydraulics: Installation of pneumatic control valve (for tipper/crane/trailer) in cab and complete hydraulic system including all piping/connections for the three-way tipping body, trailer tipper hydraulics, and loading crane. Delivery and installation of suitable axial-piston constant pump. Rcsdpfxoxnnvme Aa Esk Special Equipment: - Fixed rear corner posts - Lift assists for side walls - Eight lashing eyes left & right recessed in the floor (4 per side) - Hydraulic system for crane/tipper/trailer switchable via valve in the cab - Positioning of underrun protection, rear lights, and supply lines to the left - Central locking for

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. Over more than 70 years of development, Vapormatt has engineered the PUMA to be both ergonomic and efficient. With an optional insertable basket, small batch parts can be processed, and a clamping device enables easy handling of rims or wheels. Large workpieces weighing up to 125 kg can also be placed on the robust stainless steel grid. For easier operation, an optional stainless steel rotary table is available. Rcedpfx Aaotqmh Es Esk The integrated recirculating water system with cascade tank, filter unit, and return pump ensures efficient use of water and blasting media. Compared to sandblasting, wet blasting allows for gentler and more uniform processing, thanks to water as the carrier medium. This technique enables you to achieve smooth and consistent surfaces on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) - Pump output: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15–40 kg abrasive media - Work surface load capacity: 125 kg Prices are net plus the current applicable statutory VAT and shipping costs. The images may show the machine including optional accessories, which are available at additional cost. If you are interested, we look forward to hearing from you. We are happy to provide professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (the OS platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, online messaging platform). In the first step, we will provide you with a non-binding offer, together with information about our general terms and conditions with legal notice and your right of withdrawal, before any purchase or conclusion of contract takes place.

Condition: good (used), Year of construction: 2007, -6Pcs. Spaleck Feeders . Type: SFLU 1950-300x3000 . L X W: 3.000 x 1.950mm. . Year of Manufacture: 2007 . With 2 Pcs. Friedrich Unbalance motors of 2KW each, Springs and Frame with rubber springs. Feeders can be sandblasted and painted . Redexwn H Djpfx Aa Eock

Condition: new, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 5,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, Internal number for customer inquiries: 5-060 ---- Ideal for low loader transport, etc.! Towing capacity 30,000 kg! MAN TGS 28.480 6x4-4 BL THREE-WAY TIPPER WITH FASSI F195 LOADER CRANE Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic four-section extension 12.7 m * e-dynamic hose equipment for two auxiliary devices * Slewing range 400° * Double knuckle system with PROLINK (overbending knuckle arm up to 15°) * Electronic overload cut-off with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS remote maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger system, outrigger width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL-System (Full Lift) switchable high-speed valve for extensions * LED work lights Vehicle: * Leaf/air suspension * Drive 6x4-4 * MAN D26 diesel engine, 480 HP, Euro 6e * MAN TipMatic automatic gearbox * MAN TipMatic operation, with steering-column lever, manual (DNR selection, shift strategy selection) * Front axle as hub reduction axle, driven, selectable * Trailing axle, 9,000 kg, non-driven, steered, liftable * Differential locks on driven rear axle + front axle * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axle and trailing axle * 310-litre fuel tank, 35-litre AdBlue tank * Digital axle load display (ALM) for air-suspended axles * Cab NN: the practical one (narrow, medium-length, standard height) * Sunblind for windscreen, inside, electric * Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment * MAN EasyControl control panel, 2 functions, operable from outside when the door is open * MAN Mediasystem Navigation Professional 12.3 inch * Navigation map Europe and Russia * Online traffic for navigation function * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Standard driveline extended warranty for 3rd year of operation up to 450,000 km, conditions as per service record * And much more. Superstructure: Rcedpjxnn Txofx Aa Ejk Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers via radio operation, work lighting, etc.) Drop Side Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternative also available: load space length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Substructure: Robust steel welded construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and 5 mm floor plate made of Hardox or Naxtra. A fixed 1,000 mm high steel front wall with 2 lashing rings inside, positioned at each outer side at half height. Corner posts fixed, with lower locks. Rear and side walls (single piece over entire length) made of aluminium hollow profiles; side walls foldable and swinging with tailboard lift assist. Tailgate also foldable and swinging, centrally locked into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, neatly welded to the tipper profile and longitudinal/cross members. Ram crosstube and tipper bracket set into the longitudinal members and accordingly reinforced. Lashing rings (4 per side) are mounted externally on the tipper floor, distributed along the length. Steel construction executed in St 52-3. All steel parts are sandblasted, body parts in RAL 9016.

Condition: good (used), Year of construction: 2014, Manufacturer: SGM Magnetics Type: T-VIS 100 Year of manufacture: 2014 With New Control-unit. See PDF-file below for more detailed information. Rcsdpfxoma Tt Aj Aa Esk Eddy Current Separator can be sandblasted and painted.

Condition: used, functionality: fully functional, “IFE SZ 1500 FS” for Sale Manufacturer: IFE Type: SZ 1500 FS Mach. No.: 51 B084-10-1 Rcodpju Tktdjfx Aa Eek Width: 1.500mm Year of Manufacture: 2005 Decks: 5 2 Pcs. Unbalance Motors and Springs included. Will be overhauled, sandblasted and painted.

Condition: good (used), functionality: fully functional, “Hein Lehmann UK 1.2 – 3.0 ED” for Sale Manufacturer: Hein Lehmann Type: UK 1.2 – 3.0 ED Deck size: 1.200 x 3.000 mm. Rjdpfou Tkrysx Aa Esck Included: – Electrical Motor – Cardan-shaft – Rubber Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), “Mogensen Sizer Type SL 2066” for Sale Find our complete stock on our website. Rodpfx Asggfkxea Ejck Manufacturer: Mogensen Type: SL 2066 Mach. No.: D 5474 Year of Manufacture: 2001 Width: 2.000mm Decks: 6 Including 2 Pcs. Unbalance boxes, shafts, 15 kW / 970 RPM electrical motor and springs. Sizer is in good working condition, can be sandblasted and painted.

Condition: good (used), functionality: fully functional, Year of construction: 1994, “Hein Lehmann Liwell LF 2,0 – 6,30 / 20 DD” for Sale Manufacturer: Hein Lehmann Liwell Type: LF 2,0 – 6,30 / 20 DD Mach.No.: 1489 Rodpsu Tiwgsfx Aa Eeck Year of Manufacture: 1994 Deck size: 2.000 x 6.300 mm Number of decks: 2 Included: – Frame – Electrical motor with console – Cardan-shaft – Rubber springs Vibrating screen can be sandblasted and painted.