Used Pressure Sandblaster for sale (14,089)

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: Hedpfx Adeynr Emebei - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Hsdpfxega I R Ej Adbsi

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 1102 S with carriage and turntable. Width: 1500mm depth: 1235mm height: 995mm Lift door pneumatic. Hededhl Ngepfx Adbji Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. Hodpfxedrtano Adbei For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Hsdpfx Asfnh Rvedbji Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Hodjupyw Espfx Adbei Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves Hjdpfx Asrl R Dledbei TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. Hsdpfxjtrdyrs Adboi The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Hedpfx Ajfz Dvvedbsi The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Hedpfx Adofz Ax Ssboi The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Hodpfxeflpmqj Adboi • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Hedpfxefzrapo Adbji The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Hedpfxefz A D Nj Adbji • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Hodpfx Asymawzjdbji

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Hodpfx Aeyfhtnedboi Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

Condition: excellent (used), Pressure valve, pressure gauge, pressure indicator, manometer -Pressure gauge: for oil filter -Measuring range: 2.5 bar -Fitting: Ø 45 mm -Thread: mm -Number: 19x fittings available Price: per piece -Weight: 0.055 kg Hodpfx Aoc Nnarjdbei

Condition: excellent (used), machine/vehicle number: YV2JG10D5BA711141, mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Hodpfx Ajymrfkodbji Weights Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: BZ-RB-28

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition Hodpfxsyncpce Adbsi General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: new, through-put width 580 mm working heigth 615 mm discs 570 x 260 mm Air consumption 400 l/min. air pressure 2.7 - 5.5 bar 0 184 Liter 0 Luft .. 3/8 Zoll weight 125 kg range L-W-H ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area Hjdpfx Adoxaagzjbji - Instruction manual in German

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HD 7/16-4ST + HWE 860, This listing refers to a Kärcher high-pressure cleaner HD 7/16-4 ST in combination with a Kärcher Hot Water Generator HWE 860 (stationary unit). The machine has been inspected in our in-house workshop and is fully functional. High-Pressure Cleaner HD 7/16-4 ST / HWE 860 Kärcher Hot Water Generator Product Description: HD 7/16-4 ST With a working pressure of 160 bar, the pre-configured cold water high-pressure cleaner HD 7/16-4 ST serves as an entry-level unit in the range of our stationary HD cleaners with single-lance operation. Our pre-configured cold water high-pressure cleaner HD 7/16-4 ST comes equipped with various features and offers multiple options for individual upgrades. A dry-running protection system and an operating hours counter are included as standard. The unit allows for the suction of one or two detergents in either high- or low-pressure mode and can be optimally configured to its place of operation thanks to an extensive accessory package (see photos). With 160 bar working pressure, this high-pressure cleaner delivers more than sufficient power to tackle even very demanding cleaning tasks. Kärcher innovations such as the EASY!Force high-pressure gun, which reduces the holding force to zero by utilizing the recoil force of the high-pressure jet, and the EASY!Lock quick-release fasteners (enabling five times faster handling compared to conventional screw connections with no compromise on robustness and durability) support the user. Kärcher Electric Hot Water Generator HWE 860: Hodpfsymdm Tjx Adboi The electric hot water generator HWE 860 is used in conjunction with the HD 7/16-4 ST high-pressure cleaner and heats water up to 85 °C. Operation of this unit requires proper instruction. Description: HWE 860 Kärcher Hot Water/High-Performance Heater The electric hot water generator offers an output of 24 kW. Its use is especially recommended where burner exhaust emission is problematic or not permitted. Maximum temperature is 85 °C, thermostatically controlled. The unit can be operated manually or automatically. The device is used in conjunction with a high-pressure cleaner. The hot water generator is delivered as a standalone assembly, complete with control cabinet and all necessary components (hoses, cables, clamps, etc.). Optionally, the customer can select between cold and hot water operation via two solenoid valves and opt for a digital timer during configuration. The unit can also serve as an instantaneous water heater—for example, during continuous operation at a flow rate of 700 l/h and an inlet temperature of 15 °C, a temperature of 45 °C is achieved (a temperature increase of 30 °C). TECHNICAL DATA FOR BOTH UNITS AVAILABLE ON THE NAMEPLATES. FOR FURTHER PRODUCT DETAILS ON: HIGH-PRESSURE CLEANER HD 7/16-4 ST HOT WATER GENERATOR HWE 860 WE RECOMMEND CONSULTING THE MANUFACTURER, KÄRCHER. Subject to changes and errors. Do you have any questions, wish for a consultation, or want to view the equipment on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our General Terms and Conditions (GTC).

Condition: used, SPENCER AND HALSTEAD AUTO SHOT BLASTER SAND BLASTER Belt type Automatic shotblaster. Hodpfx Asydic Iodboi

Year of construction: 2017, condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, total length: 800 mm, total width: 700 mm, total height: 1,600 mm, pressure (max.): 5 bar, machine/vehicle number: 0102, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Pressure: 0.8 – 5 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Connected load: 100 W Hjdeym R Spjpfx Adboi Dimensions & Weight Internal dimensions: 580 x 500 x 300 mm Dimensions (L x W x H): 800 x 700 x 1,600 mm Weight: 300 kg External reference: Lot 222/ Lotec

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Hjdpfxjquzfco Adboi Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition

Condition: like new (used), 5 units available All are new and unused Price applies per unit Hodpfxeylkyko Adboi

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,671 h, functionality: fully functional, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, rotational speed (max.): 1,800 rpm, Hammelmann HDP484 with Caterpillar C16, 2500 bar, 89 l/min Hsdpfx Adsyidgpsboi