Used Sandblaster for sale (273)

Condition: refurbished (used), Year of construction: 2019, operating hours: 189 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 150 l, battery voltage: 36 V, The Kärcher B150R D90 Dose was manufactured in 2019 and has only 189 operating hours. We have completely overhauled the machine; every component has been cleaned and tested for proper functionality. The suction bar, base plate, and bumper have been sandblasted and newly powder-coated in our workshop. New squeegee blades on the suction bar ensure perfect water pick-up performance. The machine is fitted with six new maintenance-free gel batteries, which can be conveniently charged using the integrated charger. Additionally, the Kärcher B150 R features a cleaning agent dosing system that precisely meters and introduces detergent during the cleaning process. The Kärcher B150 R is ideal for medium to large areas such as logistics halls, workshops, or underground car parks. Technical data: Working width: 90 cm Fresh water tank: 150 liters Suction width: 118 cm Weight: 957 kg Rcsdsxx S Dcspfx Aa Eok

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Redpfxowx Dbij Aa Eeck Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics Rcjdpswtairjfx Aa Eok • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Year of construction: 2016, condition: ready for operation (used), A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible. Rcodpfsxxzhqox Aa Eok

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps Rcodpewpknwsfx Aa Eok • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: new, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference for customer inquiries: 3-196 / IMMEDIATELY AVAILABLE ---- MAN TGS 26.480 6x4 three-way tipper with FASSI F255A.2.24 E-DYNAMIC loader crane Loader Crane: * FASSI F255A.2.24 e-dynamic * Hydraulic quadruple extension, 12.7 m reach with 1,415 kg load capacity * e-dynamic hose kit for 2 auxiliary devices * Slewing range: 400° * Double linkage system with PROLINK (over-bending knuckle arm up to 15°) * Electronic overload protection with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special hydraulic outriggers, 6.64 m extension incl. FSC * Outriggers operable via remote control * FL system (Full Lift) – rapid extension valve for telescopic arms * LED work lights Vehicle: Rjdpfx Ajxnn Suja Ejck * MAN D2676 LFAI diesel engine, 353 kW (480 hp), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * 6x4 drive * Leaf/air suspension * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank capacity, 60 l AdBlue tank * Full brake assist * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on the front axle, drum brakes on rear axles * RINGFEDER trailer coupling, type 4040/G150A * Cab NN: the practical option (narrow, medium length, standard height) * Mechanical lifting roof * Air-sprung comfort driver's seat with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl panel, 4 functions, operable from outside when door is open * Electrically operated interior sun blind for windscreen * Cool box * MAN SmartSelect infotainment control with touchpad and direct-entry buttons * MAN Media System Navigation Advanced 7 inch * MAN Soundsystem Advanced * Navigation maps for Europe and Russia * Online traffic data for navigation Body: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top specification: radio remote control, hydraulic outriggers via remote operation, work lights, etc.) Platform: * Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm * Bulkhead: 1,000 mm high Subframe: Robust steel welded construction with two longitudinal members and cross members to support the 5 mm thick tipper profile and a 5 mm Hardox or Naxtra floor plate. A 1,000 mm high fixed steel bulkhead with 2 round lashing rings inside, positioned externally at half height. Fixed corner posts with lower fasteners. Rear and side walls (one-piece over the full length) made of aluminium hollow profiles; side walls are foldable and swingable with tailgate lifting aid. The tailgate is also foldable and swing-mounted, with centralized locking integrated into the tipper profile. Floor plate made of 4 mm Hardox or Naxtra, precisely welded to the tipper profile and the longitudinal/cross members. Press traverse and tipper arms are recessed into the longitudinal beams and appropriately reinforced. Lashing rings (4 per side) are distributed along the outer edge of the tipper floor. Steel structure made from St 52-3. All steel parts are sandblasted; body components are painted or powder-coated in single-color RAL 9016. Auxiliary frame: Designed to accommodate the front and rear tipper arms, with press traverse and cross members. In crane installation area, constructed as a closed box profile with side ...

Condition: used, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter by KELLER. Suitable for plasma, laser, sandblasting, soda blasting and all types of dry dusts. The fan is located after the filter on the clean side, minimizing the risk of explosion to a minimum. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 250 mm Capacity: 1300 m3/h Vacuum: 4800 Pa Dimensions: Height: 2.65 m Width: 1.25 m Depth: 0.95 m Rsdpfx Aaexyx Hts Esck Stock number: 0545

Condition: used, Year of construction: 2017, operating hours: 4,902 h, functionality: fully functional, machine/vehicle number: 55/17, input voltage: 400 V, compressed air connection: 7 bar, type of input current: three-phase, power: 2 kW (2.72 HP), operating pressure: 4 bar, workpiece weight (max.): 700 kg, air demand: 120 m³/h, Equipment: documentation/manual, Sandblasting machine Bohle SBM 2500P Year of manufacture: 2017 Sandblasting machine for blasting and matting glass panes. Almost all air hoses and belts were replaced this year. An on-site inspection during operation is possible by appointment. Sale as is, without guarantee or warranty. A large quantity of spare parts is included free of charge. Self-collection only. Compressor can be purchased additionally as an option. We look forward to your inquiry. Rcodpfxsxukmbe Aa Eok

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Lighting: • 2 x integrated LED-AS in the front wall • 2 x rotating beacons on FH roof Rcodpsxvv E Ejfx Aa Eok • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: good (used), 37 Machine Tools • Years of manufacture 1970–2000 • Well-maintained condition For sale is an extensive selection of machines from a locksmith’s workshop or metalworking company, specializing in special-purpose machine construction. The total lot includes over 40 predominantly conventional machine tools, solid industrial quality, all well maintained and in full working order. Many machines have been repainted in red/blue for company identification, but are technically in good original condition. The package includes, among others: CNC Vertical Machining Center Alzmetall BAZ 15 CNC Universal Milling Machine Wemas WM3 Universal Milling Machine Deckel FP3A Guillotine Shear BRZESKA FABRYKA 2000/3 Mini Excavator / Multi-purpose device “BOBCAT” FAI 336 Two Band Saws Mössner Rekord (large and small) Cold Circular Saw Kaltenbach Mitre Saw with Table K180 Surface Grinders ABA and ST 30/50 Cylindrical Grinder MSO EDM Machine AEG-Elotherm Elbomat 400 Eccentric Press Helmerding TP8 Hydraulic Press FMA Pokorny 60080-01-5 Spindle Press 10 t Grinder Knuth Belt & Disk Sander 102800 Sandblasting Unit Tremor S.A. Vevey Column Jib Crane 500 kg Four Welding Machines TransMIG 400 Pillar Drill Siegfried Franzen Jungheinrich Pallet Stackers (electric high-lift truck) And numerous other machines, workshop equipment, and accessories. Condition: Consistently well-maintained workshop equipment, all machines functionally tested Some machines repainted in company colors (red/blue) Sturdy machines of high-quality German and European manufacture Terms & Logistics Purchase of individual items possible; removal to be handled by the buyer Ideally sold as a complete lot, available immediately, For full lot purchase, we can arrange transport and loading logistics. Viewing by appointment possible Interested? A complete machine list, technical data, photos, and pricing available on request. If you have questions or would like to arrange a viewing, please contact us. Redpfxexx Tl Is Aa Eock

Condition: good (used), Small sandblasting system Internal dimensions 1.2 x 1.2 x 0.6 m (L x W x H) Redpfx Aaexr Az Ej Ejck Connection pressure: 8 bar with extraction, loading table and spare parts (see pictures)

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal customer enquiry number: 5-052 / Available immediately!!! Rjdexnnwkjpfx Aa Esck MAN TGS 26.440 6x2H-4 BL 3-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 tm) * Hydraulic four-fold extension: 12.7 m * e-dynamic hose routing for 2 additional attachments * Slewing range: 400° * Double knuckle boom system with PROLINK (over-bending knuckle arm up to 15°) * Electronic overload shut-off device with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special outriggers, hydraulic outreach of 6.64 m incl. FSC * Outriggers operable via radio remote control * FL-System (Full Lift) engageable rapid feed valve for extensions * LED work lights Vehicle: * MAN D2676 LFAJ diesel engine, 324 kW (440 hp), 2,200 Nm torque, Euro 6e * MAN TipMatic 12.24 OD automatic transmission * 6x2H-4 MAN HydroDrive, hydrostatic driven front axle * Wheelbase: 3,600 + 1,350 mm * Leaf/air suspension * RINGFEDER 40mm trailer coupling, type 4040/G150A (alternatively with surcharge, 50mm diameter) * 2-line trailer brake couplings, DuoMatic coupling * Fuel tank capacity: 390 l, AdBlue tank capacity: 60 l * High-performance engine brake MAN Turbo EVBec, multi-stage * Differential lock on driven rear axle * Trailing axle, 9,000 kg, non-driven, straight, steered, liftable * Prepared for 2 cameras, one camera coupled to reverse gear * NN cab: the practical cab (narrow, medium-length, standard height) * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Electric sun roller blind for windscreen, interior * Coolbox * MAN EasyControl operating panel, 4 functions, can be operated from outside when the door is open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system Superstructure: 3-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers with wireless operation, work lights, etc.) Flatbed: * Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm * (Alternative also available: loading length 5,200 mm x 2,420 mm x 800 mm) * Headboard height: 1,000 mm Subframe: Robust steel welded construction with two longitudinal members and cross members to support the 5 mm tipper profile and the 4 mm floor plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall. Fixed corner stanchions with lower-mounted locks. Rear and side walls (single piece along full length) made of aluminium hollow profiles, side walls foldable and swinging with drop-side lifting assistance. Tailgate also foldable and swinging, with central locking integrated in the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, cleanly welded to the tipper profile and longitudinal/cross members. Press traverse and tipping arms are recessed and correspondingly reinforced in the longitudinal members. Lashing eyes (4 per side), positioned externally along the length of the tipper floor. Steel structure made of St 52-3. All steel components are sandblasted, superstructure parts painted or powder coated in RAL 9016 (pure white). Subframe: Subframe for mounting the front and rear tipping arms, with press traverse and cross members. In the crane mounting area, designed as a closed box profile with side-mounted crane mounting plates. Plastic mudguards.

Condition: used, filter area: 108 m², suction capacity: 5,000 m³/h, Dust extraction unit, welding fumes extractor, self-cleaning cartridge filter suitable for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean side to minimize explosion risk. Motor power: 7.5 kW Capacity: 5000 m³/h Inlet diameter: 315 mm Cartridge filter elements (replaced 04.2025): 9 pcs. Filtration surface: 108 m² Rotary valve for dust discharge Stock no.: 1076 Rcsdsxx R Nkspfx Aa Eok Device dimensions: Filtration unit: Width: 1.95 m Depth: 1.35 m Height: 3.95 m Base: 1.66 m x 1.30 m Enclosed fan: Width: 1.40 m x 1.25 m Height: 1.25 m

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Rcodpfx Aast H I Tvj Ejk Why the XYZPrinting MfgPro230xS? Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Lighting: • 2 x integrated LED-AS in the front wall Rjdexvv Exspfx Aa Ejck • 2 x rotating beacons on FH roof • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. Rjdpjlccvmjfx Aa Esck 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,425 h, functionality: fully functional, machine/vehicle number: 717520914323, area performance: 3,500 m²/h, The Hako Scrubmaster B75 R is from 2019 and has only clocked up 1425 operating hours. It was completely dismantled and cleaned by us and every component was checked for proper function. Four new maintenance-free gel batteries are included. The squeegee and brush deck were sandblasted and powder-coated in our workshop. New rubber lips and new brushes have been fitted. The Hako Scrubmaster B75 R is a very compact cleaning machine and very suitable for small to medium-sized areas such as workshops, halls or stores. Technical data: Working width scrubbing cm 65 Area performance theoreticalm²/h 3.500 Working speedkm/h 5.5 Fresh water tank capacityl 75 Rsdpfx Aaeu Ezmnj Esck Dirty water tank capacityl 75 Length with squeegeecm 147 Width without/with squeegee cm 76/86

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Rcedpfsxxkzmjx Aa Eek Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: new, mileage: 400 km, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 56,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib as well as Winch and Work Basket ----Usage · For good roads, normal operating conditions · Long-distance transport · Predominantly flat terrain · Ambient temperature up to +40°C, for more than +40°C max. 25 hrs/year · Ambient temperature down to -25°C, below -25°C max. 25 hrs/year · Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame · Clean roads, max. 10% soiled · Flatbed chassis without preparations · Gross combination weight, technically: 80 t (observe towing capacity of the trailer hitch!) · Special-purpose vehicles · Vehicle for crane behind the cab · Mirrors for body width 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact heights · Electro-hydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter, and EGR · Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+). Braking capacity: 340 kW/462 hp (D13S) · Complies with ADR braking regulations. · I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm · Liftable axle · Drive axle RTH2610B. Double axle hub reduction. 4 planetary gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel ---- Included in delivery: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with side panels * Execution of all necessary chassis modifications for crane installation, removal and installation of components, exhaust system, tanks, etc. Adaptation of vehicle frame. For all chassis and body assembly work, the respective chassis manufacturer’s body mounting guidelines are strictly adhered to and implemented with the highest quality. Complete assembly of a specially designed and manufactured auxiliary subframe made of fine-grain steel, for crane and superstructure. The all-welded and bolted auxiliary subframe guarantees extreme torsional rigidity and perfect crane vehicle stability. A unique feature is the design of the subframe. The build is of the highest quality and painted in RAL chassis color. Mounting/bolting of the crane and main support carrier to the subframe. Installation of all hydraulic and electrical connections. Installation location: front Rsdpfx Aaoxl Ip Io Eeck * Flatbed design as steel/welded construction, REMOVABLE FLATBED, length approx. 4,800 mm x width x 2,480 mm, with hydraulic extension to 1,400 mm operable by remote control. Flatbed body in steel / sandblasted / painted in RAL chassis color. Removable aluminum side panels, Suer brand, 600 mm high, anodized finish. Standard flatbed floor with welded steel checker plate, 4 mm painted. 2 rows of MultiSave locking system recessed and welded into the floor. 6 Thiele lashing rings (5,000 daN) recessed in the floor frame profile. 8 retractable lashing points per side (2,000 daN), flexible profile/arrangement. Stable bulkhead made of welded frame, welded 4 mm steel sheet and 5 accessory hooks, bulkhead height 1,300 mm, steel design / painted in RAL chassis color. Protective panels, mudguards, stainless steel (WIESE appearance). 4x 20' container locks on the front bulkhead (2x) in the extension.

Condition: good (used), Year of construction: 2002, functionality: fully functional, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter KELLER VARIO T. Suitable for plasma, laser, sandblasting, soda blasting and all kinds of dry dust. The fan is located after the filter on the clean side, which reduces the risk of explosion to a minimum. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 315 mm Capacity: 1300 m3/h Vacuum: 4800 Pa Dimensions: Height – 2.05 m Width – 1.02 m Depth – 1.60 m Rjdjvu Rylepfx Aa Ejck Weight: 700 kg

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Rjdpfx Aajxfdpwe Esck Lighting: • 2 x integrated LED-AS in the front wall • 2 x rotating beacons on FH roof • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: used, Year of construction: 2003, filter area: 143 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum extraction for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is located on the clean side, reducing the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DF+6-Cyclo Year of production: 2003 Filter cartridges – 6 pcs. Filtration surface area: 143 m² Fan power: 7.5 kW Capacity: 6000 m³/h Inlet diameter: 300mm/250mm We also offer, on order, new filter cartridges tailored according to the device's application. Dimensions: Height – 3.05 m Width – 1.85 m x 2.35 m Stock number: 0989 Rcedpfxow I Av Ne Aa Eok

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW 2025 MODEL • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm • Fifth-wheel coupling with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all necessary chassis modifications for crane installation, removal and reinstallation of ancillary components, exhaust system, tanks, etc. Adaptation of the vehicle frame • All chassis and bodywork modifications are carried out in strict accordance with the bodybuilder guidelines of the respective chassis manufacturer, ensuring the highest quality • Complete installation of a special auxiliary frame developed in-house and manufactured from fine-grain steel for crane and body, welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the auxiliary frame, finished to the highest quality and painted in frame colour • Mounting/bolting of the crane and main stabilizer support to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed constructed as a removable steel/welded structure • Approx. length: 380 cm, width: approx. 248 cm • Flatbed body painted in RAL chassis colour • Removable aluminium sideboards by Suer, 600 mm high, anodized finish with steps, removable "Kinngripp" posts • Standard flatbed floor with welded 4 mm steel checker plate, painted in RAL chassis colour • 6 flush, retractable lashing rings rated at 2500 daN per side, adjustable in slotted profile • 4 chain lashing points rated for 6500 daN (2 front, 2 rear on the body) • Solid front wall consisting of welded frame with 4 mm welded steel plate and 5 accessory hooks, approx. 1300 mm high, painted steel design, with 2 welded folding lashing eyes for load securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours, size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, 2 rows (as agreed), spaced approx. 80 cm from the front wall and rear • Holders (for support pads, crane pads) made of galvanized steel • Additional stabilizer fitted under chassis • Installation of underrun protection at the rear and additional stabilizer, with installation of hydraulic and electrical connections Rcsdpfx Aaexvv Elo Eok • Duomatic and red/yellow couplings at the front for semitrailers and also at the rear for trailers New Crane, Type FASSI F545 RA 2.27, continuous rotation, completely assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment & crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection log Lighting: • 2 LED-AS integrated into the front wall • 2 revolving beacons on FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, one left and one right, arrangement by agreement • 4 LED-AS, two left and two right

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 56,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 4,800 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Platform Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib, plus Winch and Work Basket ----Application · For good roads, standard operating conditions · Long-distance transport · Predominantly flat topography · Ambient temperature up to +40°C, if above +40°C max. 25 hours/year · Ambient temperature down to -25°C, if below -25°C max. 25 hours/year · Center of gravity (structure and load) approx. 0.5 - 1 m above top edge of frame · Clean roads, max. 10% dirty · Flatbed chassis without pre-installation · Gross combination weight, technical: 80 t (Observe the towing capacity of the trailer hitch!) · Special vehicles · Vehicle for crane behind the cab · Mirrors for body width of 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements · Electorhydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Emissions per Euro 6 Stage E, with SCR, particulate filter and EGR · Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+). Braking performance: 340 kW/462 HP (D13S) · Complies with ADR braking regulations · I-Shift AT2612, automated 12-speed transmission (direct-drive), max. input torque: 2,652 Nm · Liftable axle · Drive axle RTH2610B. Tandem axles with hub reduction. 4 planet gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel Rsdpfx Aajw D U Ike Ejck ---- Scope of Delivery Includes: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with drop sides * Execution of all necessary chassis modifications for crane installation, disassembly and assembly of mounted parts, exhaust system, tanks etc., adjustment of the vehicle frame. All chassis and bodywork modifications are performed in compliance with the respective chassis manufacturer’s mounting guidelines and carried out to the highest quality standards. Complete assembly of a custom-designed and manufactured auxiliary subframe made of fine-grain steel, for crane and body. The welded and bolted subframe to the chassis guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique design of the subframe is a distinctive feature. Designs are executed to the highest standards and painted in the chassis RAL color. * Mounting/bolting of the crane and main stabilizer beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front * Flatbed design as a steel/welded construction, REMOVABLE FLATBED, length approx. 4800 mm x width 2480 mm with hydraulic extension to 1400 mm, radio remote controlled. Flatbed structure in steel / sandblasted / painted in chassis RAL color. Removable aluminum drop sides, Suer brand, 600 mm high, anodized finish. Standard bed floor with welded 4 mm steel chequer plate, painted. 2 rows of MultiSave locking system flush-mounted and welded into the floor. 6 x Thiele lashing rings 5000 daN recessed into base frame. 8 x retractable lashing rings per side 2000 daN, flexible profile/arrangement. Stable front wall consisting of welded frame, welded-on 4 mm steel plate and 5 accessory hooks, front wall height 1300 mm, made of steel / painted in the chassis RAL color. Trimming panels, mudguards in stainless steel (WIESE design). 4x 20' container locks on the front wall (2x) in the extensio...

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test Redpfx Aewtb Rqsa Eeck • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on