Used Sandblaster for sale (325)

Condition: like new (used), “GFA 2QL 5000/2000” for Sale Manufacturer: GFA Type: 2QL 5000/2000 Deck size: 2.000 x 5.000 mm Number of decks: 2 (Different deck-angle) Included: – Electrical Motor Dedpohcw T Esfx Aa Hskt – Cardan Shaft – Springs Vibrating screen can be sandblasted and painted.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, total length: 10,020 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, Weights ? Permissible total weight: 36,000 kg ? Permissible axle load: 24,000 kg (technically 27,000 kg) ? Fifth wheel load: 12,000 kg ? Tare weight: approx. 8,560 kg Dimensions ? Fifth wheel height: approx. 1,150 mm ? Overall width: approx. 2,550 mm ? Overall length: approx. 10,000 mm ? Roller height, unit: approx. 1,350 mm General ? Our vehicles are designed and manufactured to meet the highest standards in the transport, waste disposal/landfill and agricultural sectors. Our many years of experience guarantee a robust vehicle with a long service life. Steel frame ? Welded steel frame structure with longitudinal and transverse beams, using high- quality steels. ? With mounting bracket for installation of the roll-off tipper. ? 2" kingpin bolted and interchangeable, 2 positions. ? Fifth wheel with platform (see below). Axles/Suspension ? Low-maintenance branded axles 3 x 9,000 kg, disc brakes. ? Axle manufacturer: SAF. ? Incl. air suspension with lifting and lowering device. ? A-axle as a lift axle with 2-side lift. ? Axle distance 1,320 mm / 1,320 mm. Dkodpfx Ajzthhgea Hjt Braking system ? Load-dependent, two-circuit pneumatic braking system according to EC Directive 71/320 (WABCO). ? Automatic load-dependent brake force regulator. ? EBS electronic brake system. ? SmartBoard incl. InfoCenter. ? Parking brake in spring accumulator design. ? Automatic lowering when hydraulic system is activated. ? Power supply via interlockable coupling connections at the front (supply cable not included). Tires ? 6 tires, size 385/65 R 22.5, branded according to manufacturer's choice, mounted on Alcoa Durabright aluminum rims. Outriggers ? 2 x 10 t geared outrigger jacks with single-side operation, 2 speeds. Superstructure Roll-off tipper in sliding arm design ? Type: S25-6400 ? Hook height: 1,570 mm, according to DIN 30722 ? Roller height: approx. 1,350 mm ? For container length inside: min. 4,750 mm to 7,000 mm ? Lifting/tipping force: 25,000 kg ? Tipping angle: 51 degrees ? Data and dimensions: according to DIN 30722 ? Working pressure: max. 350 bar Additional equipment ? Hydraulic internal locking. ? ControllerPlus control system incl. control block cover, incl. display. ? Wireless remote control incl. holder and charging station, quick diagnostics display. ? Softstop, gentle lowering. ? Softslide, smooth movement of the container. ? Manual control as emergency operation. ? Automatic lowering of the air suspension when the hydraulic system is activated (lowering of the air suspension on axle body, C-axle). ? Mounting on chassis frame, the mounting arm is located between the longitudinal beams. Superstructure/Fifth wheel platform ? Platform design with fixed front wall and folding side aluminum gates, rear gate pluggable. ? Wooden floor made of screen-printed panels, screwed and sealed. ? Tie-down points in the outer frame for securing the load. Lighting ? 24 Volt according to StVZO (German Road Traffic Regulations) with LED rear lights, mounted as high as technically possible. ? Incl. fog light and reversing light. ? 2 position lights at the front and rear. ? 4 marker lights per side. ? Connection at the front via a 15-pole socket according to DIN ISO 1185 and DIN 3731. ? 2 extra reversing lights. ? 4 extra work lights switched via the fog light. Attachments ? 2 x wheel chocks with holders. ? 6 plastic mudguards (2 with splash guards). ? Rear underrun protection, fixed with splash guard. Painting/Surface treatment Chassis: Sandblasted and primed Chassis: Pa

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,420 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering brand new, factory-new roll-off platforms with steel side walls for sale, manufactured in our own production facility. The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50 mm diameter - Hook height 1570 mm - Platform dimensions: 6,000 mm x 2,420 mm x 800 mm Dodpfx Aaeyrpkze Hekt - 2x galvanized ladder rungs - 5 mm S-235 floor plate - Sheets and profiles continuously welded - Laterally spring-relieved steel side walls with 3 mm S-235 steel thickness - 7x side wall hinges per side for increased performance - Drive-over & spring-relieved rear gate (4.5 t point load!) - Side walls, gate, and rear supports can be completely disassembled quickly and easily if required - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing eyes with a tensile force of 2.5 t each, variably positionable in multilock strips - Front: 2x lashing rings, each with a tensile force of 7 t - All steel parts automatically sandblasted before processing! - Only steel from Thyssen Krupp used, including certificate - Primer: Premium 2K zinc phosphate primer - Paint: High-quality 2K paint in RAL 7016 - Warning marking according to §32 (1) StVO & DIN 67520 - Includes type plate & container inspection according to DGUV rule 114-010 (formerly BGR 186) - Immediately available - Unit price: €7,150.00 plus VAT - Also available in other platform lengths (4.5m / 5m / 5.5m / 6.5m) Nationwide delivery possible for an additional charge! If you are interested in other roll-off container products, we would be happy to receive your inquiry!

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,800 kg, empty load weight: 2,200 kg, loading space volume: 13 m³, loading space width: 2,420 mm, loading space length: 6,500 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering a new 13m3 roll-off container with drop sides for sale. Dkodpjypb Nwjfx Aa Hst The container has the following features: - Standard: DIN 30722-1 - Lifting height: 1,570 mm - Lifting bracket: 50 mm diameter - Container internal length: 6,500 mm - Container internal width: 2,420 mm - Container internal height: 800 mm - Floor plate: S235 steel (St37-2) with 5 mm floor thickness - Two-part, spring-relieved side walls made of S235 steel with 3 mm side wall thickness - All steels exclusively from Thyssen Krupp - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing hooks in a multilock rail with 2,500 kg (positionable as needed) - 2 lashing rings on the front side, each with a tensile strength of 7,000 kg - Swing-out tailgate including spring-relieved access ramp - All posts and side walls can be easily and completely removed if required! - Front wall height: 1,600 mm - Longitudinal beams: IPN 180 - All-round net hooks - Painted in RAL 7016 anthracite - The container is completely primed with a 120mu zinc phosphate primer and then painted with high-quality 2-component paint in a thickness of 80mu - Total weight: 16,000 kg / Empty weight: approx. 2,300 kg / Payload: 13,700 kg - Including nameplate and container inspection according to DGUV rule 114-010 (formerly BGR 186) - Warning marking according to §32 (1) StVO and DIN 67520 - Unit price: €7,800.00 plus VAT - Available immediately Also in stock with other useful internal lengths (4.5m / 5m / 5.5m / 6m) Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.

Year of construction: 2005, condition: ready for operation (used), Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible. Dkodpfsyrtamjx Aa Hjt

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Djdpfew Duvhox Aa Hskt

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Djdey T Iyrspfx Aa Hjkt Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Dodpfx Aoy Nwq Soa Hjkt

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 031022140047, Year of construction: 2022, operating hours: 126 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, overall weight: 145 kg, laser power: 30 W, feed length X-axis: 130 mm, feed length Y-axis: 180 mm, feed length Z-axis: 330 mm, We are offering for sale a professional industrial SLS 3D printer, the Sinterit Lisa X, from our company's assets. The machine has been used very little, exclusively for development purposes, as evidenced by its total runtime of only 126 printing hours. The printer is in like-new condition, fully functional, and ready for immediate deployment in your production. Dodpfx Aajzyagzs Hskt Before the sale, the machine underwent a complete diagnostic check, software update, and professional service by an authorized partner. During this service, the printer received a significant hardware upgrade. The original wire-based powder deposition mechanism was replaced with a new and highly reliable system using a strip (so-called Recoater Strip retrofit) as part of the authorized intervention. This ensures maximum reliability and trouble-free operation. Furthermore, the seals of the printing chamber were replaced, the machine was professionally cleaned, the electronic contacts were treated, and the paint was restored. The machine has successfully completed a calibration print under load and is running on the latest firmware. Regarding the technical specifications, it utilizes Selective Laser Sintering (SLS) technology with a 30W IR laser. The printing speed reaches up to 14 mm/h, which is ideal for rapid prototyping and small-batch production. The printing volume is 130 x 180 x 330 mm for PA and PP materials and 130 x 180 x 340 mm for flexible materials. A major advantage is the open system of the Sinterit Studio Advanced software, which allows full support for third-party printing materials and access to dozens of printing parameters. As a huge bonus, we are including the available stock of printing powder completely free of charge with the printer. If interested, it is possible to purchase the complete set of accessories for subsequent processing of the prints (cleaning manipulator, sandblasting station, certified ATEX vacuum cleaner) after mutual agreement. We will be happy to provide you with more information, send you the complete machine specifications, or arrange a personal inspection.

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Model: The Smart "ONE" Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. Dedpfxoy Shb Hj Aa Hekt 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Stock number: 1135

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, overall weight: 900 kg, filter area: 95.6 m², suction capacity: 3,000 m³/h, negative pressure: 2,000 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by Donaldson Torit. Suitable for welding, grinding, sandblasting and all kinds of dry dust. Equipped with Ultra WEB cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, resulting in high device efficiency. Fan power: 3 kW. Capacity: 3000 m3/h. Vacuum: 2000 Pa. Filter surface area: 95.6 m2. Inlet diameter – 200 mm/180 mm. Overall dimensions: 1.70 m x 1.30 m; Height: 2.30 m. Inventory number: 0006. Dkedpfx Aaoy Sf Nbs Hot

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver Dkedpoxn Eckjfx Aa Hst * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating feature (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel plate is then mounted on the chassis. The crane and superstructure, including the fifth wheel plate, can also be used in combination. Dkjdpfx Aaoy Hm E Hs Het The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler undercarriage would also be available; the net price is €149,900. ? Mounting/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable stake pockets. ? Standard platform floor with welded 4 mm steel checker plate, painted in RAL (chassis color). ? 6 recessed lashing eyes, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 lashing points for chains 6500 daN (2 in the front and 2 in the rear of the superstructure). ? Stable front wall consisting of a welded frame, welded steel sheet 4 mm and 5 accessory hooks, front wall height approx. 1300 mm, steel, painted, with 2 folding eyelets for lashing straps, welded on. ? Side panels, mudguards made of aluminum checker plate (sandblasted, powder-coated and painted). ? Multifix stake pocket rows, 2 rows with a distance of approx. 80 cm from the front and rear walls. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with endless rotation, fully assembled, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane are carried out according to the technical regulations and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection certificate. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on the left and one on the right, arrangement to be agreed upon. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available upon request.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting Dkedpsxn Ebmefx Aa Hot * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. Dkjdpfx Aoy Hm Eyja Hst ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. Dksdpfoy Hm Etex Aa Hjt ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h Dkodpfx Aaeqcyzwj Hjt -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: used, Year of construction: 2005, Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device -Manufacturer: Güde, blasting system sandblasting cabin type P1 Dkedpjryak Tefx Aa Hjt -Interior: 580/480/H295/350 mm -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm -Total weight: 38 kg

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Dkodpfx Aaowiuaqj Hjt Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: used, Manufacturer: SatrindTech Srl Type: F 810 Mach.No.: 65489 Dedpfx Aaswvk A Uo Hokt Shredding Chamber size : 850 x 590mm. Distance between shaft centres: 215mm. With 15 kW Electrical motor. Crushers will be overhauled, sandblasted and painted.

Condition: like new (used), “Parker 16″ x 5″ (400 x 130mm)” for Sale Manufacturer: Parker Dkodpfx Asgw Drxja Het Inlet size: 16″ x 5″ (400 x 130mm) Electrical Motor: Included Can be sold with or without frame. Crusher is overhauled, sandblasted and painted. 6 Pcs. (3 sets) new jaws on stock.

Condition: refurbished (used), Tanks with a capacity of 50,000 liters, Height: 2.85 m Length: 8.5 m Perfect for a retention tank or fire protection tank. Drinking water tanks are also available. The tanks are in very good condition, leak-free, and have been sandblasted by us. Freshly painted with durable, anti-corrosive epoxy resin and polyurethane paint on the outside. They are leak-proof and prepared to meet fire department regulations. We offer tanks with and without beds. Dedefngf Ispfx Aa Hjkt The price for a tank without steel beds is PLN 10200€, the price for a tank with beds is PLN 11200€. The raw tank (not sandblasted or painted) costs 5600€. The tanks come with a leak-tightness certificate, a declaration of compliance with fire protection standards, required for fire department inspection, and an Operation and Maintenance Manual (available upon request). The customer can decide on the nozzle arrangement. An over-tank sump covering the tank outlet is available for PLN 4,000 net per unit. A float valve costs PLN 820€- 1500€ depending on the size. Installation is included in the price. The estimated time for completing a single tank is approximately 21-28 business days. Payment: 10% of the total amount as a deposit, with the balance due upon delivery, but before unloading the tank. We offer our own transport of the tank to the customer.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. Djdpfxoy U Auyj Aa Hokt • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) Dedpfx Asy U Autoa Hjkt • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, Dedpfxei A Hz As Aa Hjkt 1 brand new limit switch with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.