Micro sandblasting unit

Peenmatic SKD 1000

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA Csdpfxez H Dyj Ap Dehd throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Chsdjxfrv Ejpfx Ap Dsd Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, Product characteristics Csdpfx Apsvxhwvs Dshd The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 1,112 mm, total height: 2,391 mm, total length: 1,237 mm, type of input current: three-phase, overall weight: 750 kg, workpiece weight (max.): 30 kg, input voltage: 400 V, space requirement width: 2,700 mm, space requirement length: 2,000 mm, power: 3 kW (4.08 HP), Equipment: cabin, documentation/manual, lighting, We are selling our mint condition BMF TWISTER blasting machine (demonstration model), built in 2025. The machine operates fully automatically and without compressed air. The workpieces rotate in a cloud of blasting media and are thus blasted on all sides. The desired settings (e.g. blasting time, speed of the blast wheel) are simply entered via a touch panel. The entries can be saved as recipes and reused later. No skilled personnel required. Quick workpiece change system, up to 100 workpieces per blasting cycle. Chodpoym T Ugefx Ap Dod Many commercially available blasting medias can be used, e.g. stainless steel, glass or ceramics. The system includes a suitable extraction system. Inspection and test blasting of customer parts are possible at our premises.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, Equipment: CE marking, documentation/manual, emergency stop, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Cjdpfx Apsl Sm N Tj Dshd Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 120 L Max. batch weight: 200 kg Max. component weight: 10 kg Compartment diameter: 700 mm Compartment width: 750 mm Nr. Of turbines: 1 Power of turbine: 5,5 kW Codozh Ikwjpfx Ap Dehd Max. turbine flow: 77 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES Max. installed power: app. 13 kW MACHINE IS IN EXCELLENT CONDITION

Condition: used, Trough belt shot blasting machine Type: MB-151/7.5 Cedjz Elicspfx Ap Djhd Design data: Filling volume: 150 liters Maximum batch weight: 300 kg Maximum workpiece weight: 10 kg

Condition: used, A shot blasting machine is offered. Equipped with an overhead rail system. Inspection possible by arrangement. Cedpfx Ajz Irmgjp Djhd

Condition: good (used), The system is open at the top. Blasting height: 1300 mm Width: approx. 1000 mm Height: approx. 2150 mm Depth: approx. 1400 mm Chjdpfxjxu Eyce Ap Dsd Weight: approx. 1000 kg

Condition: new, Year of construction: 2026, TA50 Mobile Scissor Lift Table The TA50 Mobile Scissor Lift Table is a professional material handling solution designed for a wide range of industrial applications. Its excellent mobility and maneuverability make it ideal for transporting heavy components and goods weighing up to 500 kg. Equipped with a modern hydraulic lifting system, wheel brakes, and a controlled lowering mechanism, the TA50 provides safe, smooth, and comfortable operation, making it an indispensable tool for warehouses, workshops, manufacturing plants, and other workplaces requiring mobile lifting equipment. Key Features 500 kg load capacity – suitable for transporting heavy loads, pallets, and industrial components. Excellent mobility and maneuverability – swivel castors allow easy movement in confined workspaces and around obstacles. Safe operation – equipped with wheel brakes and an overload protection valve for enhanced stability and operator safety. High-quality welded construction – precision robotic welding ensures outstanding durability and long-term reliability. Easy operation – the hydraulic foot pump enables effortless lifting, while the controlled lowering speed provides smooth and precise load positioning. Chjdpfx Apjric Hno Ded Construction and Technology The TA50 Mobile Scissor Lift Table features a heavy-duty steel construction designed for intensive use in demanding industrial environments. Its reinforced hydraulic lifting system allows heavy loads to be raised smoothly to a maximum height of 900 mm, while the sealed hydraulic foot pump ensures reliable, maintenance-friendly operation. An integrated overload protection valve prevents lifting beyond the rated capacity, protecting both the equipment and the operator. The lift table is fitted with reinforced polyurethane wheels, offering excellent durability, quiet operation, and resistance to mechanical wear. Swivel castors provide outstanding maneuverability, making it easy to navigate narrow aisles and restricted work areas. An ergonomic push handle further enhances user comfort and simplifies handling during everyday operation. Precision and Performance The TA50 delivers excellent lifting precision and operational efficiency. Its lifting range of 340–900 mm allows operators to adjust the working height according to the application, improving ergonomics and productivity. The adjustable platform lowering speed provides complete control when lowering loads, which is particularly important when handling heavy pallets, production components, batteries, and other valuable materials requiring careful positioning. Standard Equipment Reinforced polyurethane wheels for durability and floor protection Ergonomic push handle for comfortable maneuvering Sealed hydraulic foot pump for smooth and reliable lifting Adjustable platform lowering speed for controlled load handling Wheel locking brakes for increased stability and operational safety Technical Specifications Specification Value Maximum load capacity 500 kg Lifting height 340–900 mm Platform size 800 × 500 mm Handle height 950 mm Weight 87 kg