Used Salt Spray Chamber for sale (4,786)

Condition: excellent (used), 2-chamber aluminium silo standing on foot ring (plastic granulate silo) - second-hand - Content approx. 70.000 Ltr. diameter approx. 3.000 mm cyl. height approx. 9.250 mm Total height approx. 14,850 mm Container with upper conical bottom and lower cone on top shelf per chamber: 1 dome DN 600 1 vent connection DN 100 Fgjdpfef D Hygsx Aacoh 1 flanged socket DN 80 the lower conical bottom ends in 2 square outlet nozzles approx. DN 250 otherwise according to photos The silo is equipped with brackets for a double ladder with back protection, which can be purchased as well, price on request.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Fgjdpfxsxbrkhe Aacjh Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 Fgsdpfov I Akvox Aaceh - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, in-stock item, available for immediate delivery Equipped with a safety system for solvent-based substances in accordance with DIN 1539. Matching loading carts available in stock (see photo). Contact us for details! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: drive-in rails Fodel Dw T Aspfx Aacegh - Connected load: 39 kW - Net weight: 1,150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Viewing by appointment in our warehouse. We offer new and used industrial furnaces. Contact us! Furnace, ovens, drying oven, kiln, heating oven, warming cabinet, industrial furnace, annealing oven, preheating oven, tempering oven, drying cabinet, chamber kiln, curing oven, forced convection drying cabinet, forced convection oven, solvent oven, chamber dryer

Year of construction: 1988, condition: used, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 20394 Specifications: 1988 model Fgodjwi Rpujpfx Aacoh 5 cubic meters Capacity: 1300 kg Tarpaulin cover One screw has minor wear (play in the bearing) Ready for delivery Own weight: 1111 Model: 1988 Falköping C5 saltspreder

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean Fsdpow R Rbxsfx Aacsgh inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Fjdpfx Asxgdrboacegh

Condition: excellent (used), Heraeus Vötsch Type: VTV 7060-5 Vibration and More ... ... Dynamic and Climatic Reliability Testing Heraeus Vötsch Temperature Test Chamber, Water-Cooled (with chamber feed-through for shaker for vibration testing) Easily test tall samples With the electrically adjustable height of the test chamber, you can easily test even extra-tall test specimens. On-site adaptation to the final shaker height is possible. Standard features, perfect down to the last detail: - Operating terminal with color touch panel - Microprocessor monitoring and control S!MCON/32*-NET - Digital I/O, potential-free - Independent, adjustable temperature limiter tmin/tmax - Adjustable software temperature limiter min./max. - Serial interface RS 232 - Volt-free contact for specimen deactivation - Water-cooled refrigeration unit - Calibration at 2 temperature points - Removable chamber floor with feed-through - 2 pipe ports Ø 50 mm and Ø 125 mm Vötsch Temperature Test Chamber VTV 7060-5 Test chamber volume: 600 liters Temperature Testing Performance: Temperature range: -70/+180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Temperature change rate, heating: 6.0 K/min Temperature change rate, cooling: 6.0 K/min Heat compensation at +20 °C: 5000 W Heat compensation at -20 °C: 5000 W Test chamber dimensions: Width 800 mm, Depth 800 mm, Height 950 mm External dimensions: Width 1225 mm, Depth 2890 mm, Height 2150 mm Height to lower edge of chamber floor min/max: 660/1380 mm Feed-through for vibration system: 710 mm Ø Fsdpfx Aajxbgcrocjgh Feed-through for vibration system: 700/700 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Sound pressure level - 1 m in front: 75 dB(A) Refrigerant: R-404A / R-23 Weight approx. 650 kg Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers before delivery: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Delivery scope: (see picture) (Specifications and subject to change, errors and omissions excepted!) For further questions, we are happy to answer your queries by phone.

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer Fjdpfx Aasu Afu Recsgh 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available, in stock, new unit with warranty - Temperature: 250°C - Internal dimensions (WxDxH): 1500 x 3000 x 2000 mm - External dimensions (WxDxH): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each An additional 100 programs can be saved/loaded via FTP or USB memory stick - 2 recirculation fans - Double doors with safety door sensors - Over-temperature protection, Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Supply and exhaust air fittings with manual dampers - Electrical specification: 400 V / 50 Hz / 3NPE Fgjdpfolkb Ezex Aacoh - Increased heating capacity approx. 70 kW - Recess for trolley entry - Documentation, CE Declaration of Conformity - Electrical circuit diagram with spare parts list We are happy to offer transport, installation, and employee briefing as an additional service. This new unit is also available with exhaust fan and other configurations! Delivery time approx. 10–12 weeks. Contact us for details! We offer new and used industrial ovens, which we also modify and customize according to customer requirements. Inspection in our machinery hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heat cabinet, recirculation oven, chamber oven, heating chamber, chamber recirculation oven, tempering oven, annealing oven.

Year of construction: 2008, condition: used, Field of application: Freight transport Serial number: S2B3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20393 Specifications: 2008 model Capacity: 9 m 3,000 L Curb weight: 2,159 kg Ready for delivery Mva kommer i tillegg Fgsdpfxjwi Rpnj Aacoh Own weight: 2159 Model: 2008 Schmidt Stratos B90 saltspreder

Year of construction: 2011, operating hours: 3,210 h, condition: excellent (used), Climate test chamber, climate chamber, temperature test chamber WKL 34/40 by Weiss Umwelttechnik Test chamber volume approx. 34 liters Internal dimensions approx. 340 x 310 x 280 mm 1 shelf Test chamber lighting: halogen Power: 1.8 kW, 230 volts 0.8 kg refrigerant R404A Temperature range: -40 to +180°C Humidity range: 10 to 98% rH Water tank for 13 liters of demineralized water Simpati control system, color touch display Test programs in automatic mode or manual for temperature and humidity only CE mark Very well-maintained heating chamber from prototype production in the motorsport department of a Wolfsburg-based automobile manufacturer. Only 3,210 operating hours. Unfortunately, no key available. Dimensions approx. 580 x 950 x 980 mm (L x W x H). Weight approx. 190 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'More offers from this seller.' Fodsw U U Nhspfx Aacjgh

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Fodpfx Ajxb A E Ajacsgh Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: Fgedpexbd Rajfx Aacsh 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Fsdpfx Ajumvu Uoacjgh Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2005, condition: used, Field of application: Freight transport Serial number: S2B1xxxx Please contact ATS Norway for more information Fedpfx Aajwi Rcbecsgh Please provide reference number upon request: 20377 Specifications: Model year: 2005 Volume: 12 m Capacity: 3,000 liters Curb weight: 1,808 kg Ready for delivery Own weight: 1111 Model: 2005 Schmidt Stratos B120 Saltspreder

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: Fgedpfx Aasw U Awmecoh - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: used, Year of construction: 2006, machine/vehicle number: A0612008, - Manufacturer Venjakob - Type. VEN SPRAY DUO/C - Year of manufacture 2006 - Working width 1500 mm - Operating side on the left - Price for a refurbished machine - As-is condition, machine not refurbished - Gun drive in Duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air output 7,000 - 10,000 m³/h - Belt conveyor system - Continuously adjustable feed speed 2 - 8 m/min - With belt cleaning system - With paint recovery via V-belt system Fodou D Hkvjpfx Aacjgh - Gun control, touch screen from Siemens - Part detection for leading and trailing edges - 3 different spray widths can be set - 0 paint circuits installed - Air supply filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Separate control cabinet with Siemens control unit - Total connection ~ 20 kW - Length: 5,600 mm - Width: 3,550 mm - Height: 2,540 mm - Voltage, Hz 400/50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% Image shows an example of a refurbished spray gun _____ Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as employee training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, mileage: 310,000 km, Year of construction: 2017, Serial number: YV2XZ22CXHA80xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21118 Specifications: Km: 310,000 (may increase) Gearbox: Automatic Full air suspension 6x2 with steering on 3rd axle Engine brake Euro 6, 419 hp Tires (see pictures) JOAB body Volume: 22.2 m³ 1 chamber MoLokk crane (bags) 1 owner On Spot Tool cabinet Beacon bar Weight Reversing camera Remote control Radio/CD Climate/AC Gold service agreement first 6 years Serviced by Volvo and Volmax in recent years Ready for delivery Fgedpfx Aasw Ragdsceh Description:Volvo FM410 waste collection truck with crane.The truck is from 2017 and has driven 310,000 km.JOAB body with 22.2 m³ capacity.It is EU-approved and ready for delivery.Covered by gold service agreement in the first years, serviced by Volvo and Volmax afterwards. Km: 310000 HK: 418 Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 16742 Total Weight: 27000 Payload: 10183 Width: 255 Length: 946 Euro: 6 Model: FM410 Gearbox: Automatic

Condition: used, Year of construction: 2018, Technical data: Pos.1 - Dedusting VEN CLEAN Smart - Working width: 1,300mm - Length: 1,060mm - Roller transport: 1,000mm - Extraction fan 4,000m/h - Compressed air 980Nl/min. - Deduster Air nozzles - With ionisation Pos.2 - Automatic spray gun VEN SPRAY PERFECT - Year of construction 2018 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Part detection via light curtain - CNC 7000 control unit - Operating side right - Gun drive in Duo version Z16 - Dry extraction with filter - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - External filter box, LxDxH: 3500x1280x2740mm - Paint recovery system via V-belt - Infinitely variable feed speed 2 - 6m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1pc. - Number of spray guns installed 4 pcs. - Number of material pumps 1pc. - Supply air filter cover G5 Fodpfevvbqqox Aacsgh - Length ~ 6,590 mm - Width 3,666 mm (+1152mm) - Height 2.500mm - Total connection 21 KW - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, from 01/2025 in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, mileage: 170,000 km, Year of construction: 2015, Serial number: YV2V001C7FZ10xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20448 Specifications: Km: Approx. 170,000 Transmission: Automatic Suspension: Air Engine brake Euro 6 Good tires Turn on 3rd axle 326 hp 6x2 JOAB on construction Size: 21.7 m HIAB S-HIPRO 130 crane Approved until 08.25 Ball clamp Support leg Remote control 1 chamber Weight Rear view camera Radio/CD Air conditioning/AC Videos are available Service history at Volvo Jessheim Ready for delivery Description:Volvo FE320 1-chamber renovation truck from 2015.The truck is equipped with JOAB construction equipment and a HIAB crane.On the sides at the back of the truck, the hoses need to be replaced, it only works the way it is supposed to.It can refer to service history at Volvo Jessheim. Km: 170000 HK: 326 Technical approved: Yes EU-approved until: 22.03.2026 Own weight: 16950 Total Weight: 27000 Fgodowphw Aspfx Aacoh Payload: 9975 Width: 255 Length: 945 Euro: 6 Model: FE320 Gearbox: Automatic

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob Fsdpfx Aaovv Hryjcsgh - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Condition: used, mileage: 280,000 km, Year of construction: 2010, Serial number: YV2J1F1C2AA69xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20835 Specifications: Km: Approx. 280,000 Transmission: I-Shift Air suspension Euro 5, 419 hp Tires (see pictures) 6x2 with turn on 3 1 chamber NTM on construction Volume: 18.6 m clamp Winch Rotor beam Weight Printer Rear view camera Diesel heater Radio/CD Air conditioning/AC Bed Services are taken at local workshop Ready for delivery Description:Volvo FM410 1-chamber truck from 2010.The truck is equipped with NTM superstructure that takes 18.6 m.6x2 with 3 axle swing.Ready for delivery. Km: 280000 HK: 418 Fjdpfowvzfasx Aacjgh Technical approved: Yes EU-approved until: 17.09.2026 Own weight: 14565 Total Weight: 27000 Payload: 12360 Width: 255 Length: 920 Euro: 5 Model: FM410

Condition: used, Year of construction: 2005, - Manufacturer Venjakob Fgodpfx Aevun Dujaceh - Roller transport system - Roller spacing 85 mm - Roller diameter 60 mm - Rollers rubberized - Length 1,000 mm - Width 2,000 mm - without drive - Color RAL 400 / 50 - Location, in stock

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock Fgedeumvk Aspfx Aacjh _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!