Used Reiss Ordinat Iii for sale (792)

Condition: used, mileage: 400 km, power: 130 kW (176.75 HP), first registration: 10/2025, fuel type: diesel, color: white, gearing type: automatic, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Approved as a 3.88t vehicle * Approved total weight * Standard climate zones * Electronic Stability Program (ESP) * Tow hitch, detachable and lockable * One towing eye at the front * Disc brakes at the front * Increase of approved total weight from 3.5t to 3.88t * All-wheel drive * Leather multifunction steering wheel, heated with Tiptronic * Partition, without window * Three-point automatic seat belts at the front with electric belt tensioner * Normal roof * Double bench seat in the cab on the right with storage compartment * Driver's seat on the left * Extended interior noise reduction * Seat heating for front seats, separately adjustable * Windshield in heat-protective glass, heated * Central locking "Keyless-Go" without safe lock * Safety interior mirror, dimmable * Dashboard with special fittings * Exhaust concept, WLTP3 N1-III, N2//EU6EC * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Rubber floor covering in the cab * Wooden floor in the cargo area * Lateral interior paneling in the cargo area (up to the roof frame) made of plywood * Incomplete truck approval * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Sun visors with mirror * 2nd heat exchanger plus 2nd evaporator * Lashing eyes for securing cargo * Lane assist plus emergency assist and traffic jam assist * Radiator protection grille * Rear mud flaps * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on the rear pillar, left + right * Speed limiter up to 90 km/h * Tire pressure monitoring, frequency 433 MHz High Ljdpfozx Nabsx Abyjru * Start/stop system with recuperation * Navigation system (Baseline) * Auxiliary heating with air and water heating, programmable * Park assist * Optional infotainment (MIB3 MP) version 2 * Second battery * High beam assistant * LED headlights * Front Assist with warning and braking for vehicles, pedestrians and cyclists * Windshield wiper intermittent control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control * Fog lights and turning lights * Headlight cleaning system * LED interior lighting concept in the passenger/cargo area * Daytime running light with assistant driving light and coming/leaving home function, automatic * Comfort telephony with LTE and wireless charging * Preparation for Smart TCO * Seat belt control, E-contact in the seat belt buckle * Wired & Wireless App-Connect * 230V inverter and socket for Europe * Country cluster "WLTP EU approval" * BSIS driving direction right, with MOIS * 4-cylinder turbo diesel engine 2.0 L / 130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Distraction and fatigue detection * With socket at the front * 8-speed automatic transmission for all-wheel drive * Preparation for alcohol interlock * Acoustic warning system for engaged reverse gear, can be switched off * Battery 520A (92Ah) * With rear view camera system (version 2) * Air conditioning with electronic control * With crosswind assist * With predictive speed limiter (pLIM) * Seat covers in imitation leather * With UNECE CS&SU * Pan-European eCall * Air conditioning with manual control with additional cooling for the cargo area * Light alloy wheels "Li

Condition: used, Year of construction: 2005, CNC Mitsubishi Mieldas 635 LC Max. machining diameter Ø 32 mm (from Ø 10 mm) Max. machining length 320 mm for the chuck Max. front drilling diameter Ø 12 mm Max. front tapping diameter M 10, tap M 8 (die) Through-hole diameter of the spindle Ø36 mm Main spindle speed from 200 to 8,000 min¯¹ Main spindle speed change Continuous S + 4-digit numerical value Main spindle indexing 1° Main spindle C-axis 0.001° Max. diameter of the chuck Ø 32 mm of the rear spindle Max. workpiece length for pick-up 145 mm from the rear spindle Max. workpiece overhang length 25 mm of the rear spindle Max. drilling diameter in the Ø 10 mm rear machining process Max. tapping diameter in the M8 rear machining process Rear spindle speed from 200 to 7,000 min¯¹ Rear spindle speed change Continuous S + 4-digit numerical value Rear spindle indexing 1° Counter-spindle C-axis 0.001° Tool holder spindle Max. tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min¯¹ Continuous S + 4-digit numerical value Opposite tool holder Max. drilling diameter Ø 7 mm Max. tapping diameter M 6 Spindle speed from 200 to 4,500 min¯¹ Spindle speed change Continuous S + 4-digit numerical value Guide sleeve and chuck models Main spindle chuck MC081-M Guide sleeve FG531-M Rego type ER16/AR16 chuck Rear spindle chuck FC081-M-K Number of tools to be mounted Up to 18 tools + α Tool dimensions Tool (multiple tool holder) 16 x 169 x 130 mm Sleeve (opposite tool holder) Ø 25.4 mm Maximum diameter of the tool mounted in the rotating tool holder of the tool holder Drill and front milling cutter Ø 10 mm Rapid feed rate 20 m/min Minimum increment of movement X1 axis 0.001 mm Y1 axis 0.001 mm Z1 axis 0.001 mm X2 axis 0.001 mm Z2 axis 0.001 mm Z3 axis 0.001 mm Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Z3 axis 410 mm Lsdpfx Asy Uvy Asbyjru Bar length 2,500 mm Center height 1,132 mm IEMCA BOSS 332-E BAR FEEDER INCLUDED Machine complete with manuals and CE declaration of conformity. All technical data shown are indicative and may be subject to change without notice, and therefore should not be considered binding.

Condition: used, mileage: 239,000 km, power: 110 kW (149.56 HP), first registration: 02/2010, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro5, number of seats: 6, total length: 7,000 mm, Equipment: ABS, central locking, parking heater, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly and easily. Attention!!! Sales are preferably made to commercial businesses. Internal ID number: [3418] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available even without a down payment * Spring offer: Upon request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Regularly serviced * Immediately ready for use * Maxi version, high and long * Auxiliary heater * Automatic transmission * Mixto with 6 seats * Camper conversion with bed/table/kitchenette/shelves/awning etc. Special equipment: 13-pin trailer socket, ashtray in the passenger compartment, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, front side turn signals, digital tachograph, floor mats, passenger compartment, heated rear window, rear door (opening angle 270 degrees), metallic paint, crossmember with integrated step, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, interior rearview mirror, seat equipment: comfort headrest, passenger seat, seat equipment: comfort headrest, driver's seat, seats in the driver's cab: passenger double seat, seats in the driver's cab: driver's seat comfort, seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, reinforced rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, fuel level gauge for auxiliary heater, luxurious interior trim in the cargo/passenger compartment, reinforced front axle, auxiliary heater (hot water), two-way speakers front and rear Lrodpfx Abszhhx Ijyou Additional equipment: 3rd brake light, storage net on the front seat backrest left, storage net on the front seat backrest right, adaptive brake light, airbag passenger side, airbag driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, floor panel in combination design, brake assistant, headlining, headlining in the driver's cab, window for rear doors, window for rear doors/tailgate with wiper/washer system, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, center left, window in the cargo/passenger compartment: - fixed, center right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, glove compartment lockable, wooden floor in the cargo area, body/structure: combination high-roof standard, child safety lock, fuel tank: main tank 75 liters, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, passenger car registration, wheelbase 4325 mm, smoker's package, low emissions according to Euro 4 emission standard Group III, sliding door cargo/passenger compartment right, seat cover/upholstery: fabric Lima, seats in the driver's cab: passenger seat adjustable, all-round glazing, maintenance interval display Assyst, heat-protection glazing (windshield with band filter at the top), permissible total weight 3.50 t, auxiliary heater (air) electric.----Do you want to lease or finance? We offer attractive offers

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW Lredpfxjvbh N Ro Abysu machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips Ledpfx Aeu Ix Arobysru *

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Sunroof, electric version Front grille design Standard Black Cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in body color / For AT/AD in black AS cab, high roof Cab roof insulation, standard Sun visor for side window Driver's side dashboard design: plastic with black trim COC (Certificate of Conformity) INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Lredoz Si Uxjpfx Abyeu Weight variant, front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 cc, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under cab Preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside 4 DIN slots, storage space above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment, 10" TFT display Transmission software, ECO-Roll (coast function) GPS cruise control Hi-Cruise Adaptive Cruise Control (ACC) Advanced Driver Distraction Warning Standard catwalk behind the cab Hill start assist (Hill Holder), for comfortable starting on inclines Electronic Stability Program (ESP) Rear view monitoring system with camera, Blind Spot Information System (BSIS), right Intelligent Speed Assist (ISA) Side marker lights Front over-run protection (MOIS) Advanced Emergency Braking System (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of cab plastic parts in cab color Storage compartment left and right IVECO logo, Gunmetal Grey Air suspension for cab Black decorative film on doors Sun visor, transparent, installed on the outside of the cab roof Premium refrigerator and storage box Digital EC control unit 4.1 ADR Auxiliary heater, diesel/water 4kW Fully automatic air conditioning in conjunction with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/feel – soft, including adjustable headrest Horn behind bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-suspended, with 3-stage cooling or heating function Smart storage space above Electro-hydraulic power steering Air tanks in aluminum version, number depends on suspension version and trailer version Without jack Battery 210 Ah High Performance AGM, battery disconnect switch electrically in the cab and on the chassis frame according to ADR/GGVS Standard ride height Fifth wheel coupling, manufacturer Jost Fuel tank 1190 liters (710 liters right and...

Condition: new, fuel type: diesel, power: 176 kW (239.29 HP), motor manufacturer: Cummins QSB7-G5, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 2.191 kg Functional Generator capacity: 220 kVA Dimensions of cargo space: 320 x 118 x 195 cm CE mark: yes Other information Fuel consumption: 39.4 Liter per Hour at 75% Load Generator: Stamford UC274H Frequency: 50 Voltage: 400 Ljdpfov N Tk Nsx Abysru Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage IIIA / Tier III Water tank volume: 400 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2017, total length: 9,680 mm, total width: 2,550 mm, total height: 1,350 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Equipment: ABS, = Additional Options and Accessories = - ADR - BPW axles - EBS - Drum brakes = Notes = Well-maintained 2017 LAG 20FT/30FT ADR chassis with ABS/EBS, ADR (EX/II, EX/III, FL, AT), BPW axles with drum brakes, unladen weight: 3,920 kg, permissible total weight: 40,000 kg, tires: 385/65-R22.5 (tread depth left: 6/9/7 mm; tread depth right: 5/8/14 mm), Dutch registration = Additional Information = General Information Year of construction: 2017 License plate: OP-80-PS Axle Configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread depth left: 40%; Tire tread depth right: 35% Lrodpfez R Rzajx Abysu Rear axle 2: Max. axle load: 9,000 kg; Tire tread depth left: 55%; Tire tread depth right: 50% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 45%; Tire tread depth right: 90% Weights Unladen weight: 3,920 kg Payload: 36,080 kg GVWR: 40,000 kg Functional Body brand: LAG O-3-CC Condition Technical condition: very good Optical condition: very good Additional Information Please contact Arne Honingh for further information.

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Lodpfjz Smz Ajx Abysru Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame.

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO Lredpfx Aey Rt N Tobysu - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations Lsdjz I Upqepfx Abyeru A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel Lrodpfx Asz I Uqhobyeu - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats Lredpfx Ajz I Up Robyou - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout Ledjz Uxmbjpfx Abyoru - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: excellent (used), mileage: 387,956 km, power: 335 kW (455.47 HP), first registration: 01/2023, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, traction control, = Additional Options and Accessories = - 2-pedal control - Adaptive cruise control - Aluminum fuel tank - Heated mirrors - Leaf spring suspension - Brake booster - DAB radio - High beam headlights - Low noise - Speed limiter - Cab - Air conditioning - Alloy wheels - Air suspension - Air-suspended seats - Particle filter - Radio/CD player - Rain sensor - Sleeper cab - Hose couplings - Sun visor - Voice control - Lane keeping assist - Stability control - Auxiliary heater - Immobilizer - Tool box - Xenon lighting Lredpfx Abez Icfgoyju - Power take-off (PTO) = Notes = Very nice Mercedes-Benz Actros 1846L Bigspace from 2023 with only 387,956 km, ADR (EX/II, EX/III, FL, AT) valid until 09.01.2027, leaf springs in the front, air suspension in the rear, radio/navigation, auxiliary drive, ADR, Mercedes-Benz engine brake, automatic climate control, sleeper cab with 2 beds, refrigerator, night air conditioning, ALCO wheels, tires 315/70-R22.5 (tread depth left: 14, 13/13 mm, tread depth right: 14, 11/11 mm), Hungarian registration with valid inspection until 09.01.2027. = Further Information = General Information Year of construction: 2023 Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc Axle Configuration Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Alloy wheels; Max. axle load: 7500 kg; Tire tread depth left: 70%; Tire tread depth right: 75%; Suspension: Leaf spring suspension Rear axle: Twin tires; Alloy wheels; Max. axle load: 11500 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 90%; Tire tread depth right inner: 95%; Tire tread depth right outer: 95%; Suspension: Air suspension Weights Unladen weight: 7,226 kg Payload: 10,774 kg GVW: 18,000 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) Lsdpfx Ajxgumcebyoru - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: used, Year of construction: 2005, Format: 320 x 480 mm Equipment: Quality control: Semko ASIR III Feeder: Number of feeder: 9 x 370 cover feeder 1x 1529 Card adhesive: 1x 423 Lrodeyxqvmspfx Abyeu AMRYS - Automatic Make Ready System Stitching unit: Typ: Prima Plus Amrys 390 2x stitching heads AMRYS - Automatic Make Ready System Delivery: Typ: Rapido 7525 year: 2001 serial number: MMZO 490 194 Display direction: left Technical data: Format min: 90 x 105 mm Format max: 320 x 480 mm Maximum mechanical speed: 14,000 cycles/hour. Three-knife Typ: Mueller Martini 449 AMRYS - Automatic Make Ready System

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2015, total length: 8,170 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 6,310 mm, Equipment: ABS, = Additional Options and Accessories = Ljdpsz Nmxbofx Abyoru - ADR - EBS - Lift axle - Aluminum wheels - Air suspension - Disc brakes = Notes = Beautiful, galvanized 2015 Van Hool 20FT ADR (EX/III, EX/III, FL, AT) chassis with ABS/EBS. Mercedes-Benz axles with disc brakes, lift axle on the first axle, rear entrance, unladen weight: 3,260 kg, permissible total weight: 39,000 kg, ALCOA wheels with 385/65-R22.5 tires (tread depth left: 94/6 mm; tread depth right: 6/9/12 mm). Dutch registration. = Further Information = General Information Year of construction: 2015 Registration number: ON-84-TX Axle Configuration Tire size: 385/65-R22.5 Axle brand: Mercedes-Benz Disc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum wheels; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 55%; Tire tread depth right: 40% Rear axle 2: Aluminum wheels; Max. axle load: 9000 kg; Tire tread depth left: 25%; Tire tread depth right: 54% Rear axle 3: Aluminum wheels; Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 75% Weights Unladen weight: 3,260 kg Payload: 35,740 kg GVW: 39,000 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more information.

Condition: used, fuel type: electric, Year of manufacture: 2017 Lsdpfxszfkiqo Abyjru Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information

Condition: used, fuel type: electric, Year of manufacture: 2015 Lrodpfxozpdr Hs Abysu Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information

Condition: used, fuel type: electric, Year of manufacture: 2015 Lifting capacity: 227 kg Lrodpfx Abszp Dh Ueyou Please contact Gebrauchtgeräte Center for more information

Condition: used, Gram Xtrem Condor S Platform Scale, 3000 kg Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries, as well as all other industries where scales come into contact with water, moisture, or other corrosive substances. Maximum flexibility: Weighing of pallets, drums, loaded transport or hand pallet trucks, trolleys, or roll containers. Suitable for weighing standard-sized truck pallets (1200×1000 mm), large drums, roll containers, or containers on wheels. Adjustable feet ensure stability during weighing and optimal force transmission to the load cells. Suitable for floor installation. Ledpfxevtl Ibe Abysru Optional: Ramps for loading and unloading weighing goods without special equipment. Very low platform height (50 mm) for easy access for loading. Connection to PC software Xtrem for simultaneous recording of the weighing values of multiple scales. Minimization of technical problems through a digital connection between the platform and the display unit. Can be calibrated according to calibration class III. Gram K4i Display Unit - Stainless steel with total protection. Illuminated LCD display with extremely large digits for remote display of the weight of the object on the scale. The housing is made of stainless steel, and the resolution is 30,000 / 60,000 divisions. Features: LCD display with large digits (52 mm) Verifiable indicator for legal use Housing made of stainless steel, protection class IP-65 RS output for connecting printers, monitors, or a PC Mounting on wall, column, or table Limit value function Piece counting function Low battery indicator Max: 3000 kg Min: 20 kg e=1000g Platform scale External dimensions: 1700 x 1500 mm Weighing area: 1500×1500 mm Optional: Ramps for loading and unloading weighing goods without special equipment. Weight: 239 kg You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Lodpfxjwxv Hks Abysru Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Ljdpjzimgtefx Abyoru Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting Ledper Ik Sqsfx Abyoru • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.