Used Reiden Rx 10 for sale (15)

Condition: excellent (used), Year of construction: 2012, New main spindle 2026 x 1000 mm x y 1100 mm x z 810 mm Milling spindle max. 18,000 rpm NC swivel head A-axis (0-180°) Main spindle motor power 38 kW Max. torque (40%/100% duty cycle): 135Nm/105Nm NC rotary table diameter 1000 x 800 mm, C-axis 360° Maximum workpiece weight: 1,000 kg Heidenhain iTNC 530 control HSK 63-A 73-position tool changer ICS (internal coolant supply) Chip conveyor with paper band filter system Electronic handwheel Coolant mist extraction Heidenhain DCM collision monitoring between machine and tool Ijdpfxsyu I Rre Aalshw Linear feed rate 60,000 mm/min Machine weight 17,000 kg Connected load 86.00 kVA

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Ihjdpfexhg Disx Aalow Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: excellent (used), Year of construction: 2014, operating hours: 8,000 h, CNC controller: HEIDENHAIN TNC640 Axes X-axis travel mm: 1.800 Y-axis travel mm: 1.800 Z-axis travel mm: 1.210 A-axis degrees: -15°+105° Worktable Table dimensions mm: ø1.400x1.200 Spindle Spindle speed rpm: 15.000 Iedpfjv Eqqxex Aaljhw Tool system Tool holder: HSK-A100 Tool magazine slots: 92 Machine running times Under power: 17.991 Spindle Working: 8.028

Condition: good (used), Year of construction: 1985, Machine is in good working condition. X axis travel - 4000mm Parts shown by hand not come. Ihodpfx Aajyvt Rhjljw

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, - CNC control Heidenhain TNC426 - swivable milling head (horizontal / vertical) - NC-rotary table (C-axis) - tool changer for 32 tools - chip conveyor - electronical hand wheel - coolant device (coolant through spindle device 20bar) Technische Daten / technical details: Verfahrweg X längs / X-Travel longitudinal 1200 mm Verfahrweg Y quer / Y-Travel cross 600 mm Verfahrweg Z vertikal / Z-Travel vertical 700 mm C-Achse Rundtisch / C-axis rotary table 360 ° Fräskopf / milling head +-90 ° Rundtischgröße / rotary table size 800 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 32 fach Antriebsleistung Spindel 100%ED / drive capacity spindle 100%ED 11 kW Gewicht der Maschine ca. / weight 9000 kg Iodpfx Aaetiw Egeljhw Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, controller model: 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition. 5-axis simultaneous machining. Rotary table: 1700 mm. Table load capacity: 6 to 9 tons. Spindle hours: 9000 h. Ihedpoytt Eljfx Aalew

Condition: like new (used), Year of construction: 2009, operating hours: 25,546 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 3,200 mm, total width: 3,100 mm, table width: 1,000 mm, table height: 800 mm, table length: 1,000 mm, overall weight: 24,450 kg, spindle speed (min.): 16,000 rpm, spindle motor power: 28,000 W, Year of construction: 2009 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1500 Y-axis travel mm: 800 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001º) A-axis degrees: 0º/-90º B-axis degrees: ±90(0.001º) Rapid traverse m/min: 30 Worktable Number of pallets: 4 Table dimensions mm: Ø1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 16000 Spindle drive power kW: 28(100%ED) Spindle torque Nm: 84/63 (40/100%ED) Tool system Tool holder: HSK-A 63 Tool magazine slots: 208 With free neighboring places mm: 140 With occupied neighboring places mm: 80 Max. Tool Length mm: 330 Max tool weight kg: 10 Chip-to-chip time s: 7 Isdpfsyiarbox Aalehw Equipment Chip conveyor Signal lamp Tool measuring arm Bar loader Chuck foot switch (double) for main and counter spindle Driven tools included Machine running times Under power: 25546 Rated power kVA: 54 Basic machine dimensions / weight Length mm: 3200 Width mm: 3100 Height mm: 3200 Weight kg: 24450

Year of construction: 1970, condition: used, Center lathe Reiden R200 Isdpfx Aohtaauealehw Center height 200mm center width 1000mm 380V speed 16 - 1580 rpm

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm weight of the machine ca.: 4,15 pro Platte t transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) Ihodpfsu N D Ipsx Aalow *

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Isdpfx Ajyly Droalshw

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, rotational speed (max.): 7,000 rpm, coolant supply: 40 bar, Universal Machining Center Machine type: Reiden BFR-23 Control: Heidenhain iTNC 530 Year of manufacture: 2006 TECHNICAL DATA: Travel paths: X-axis: 3,000 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: +-180° Rapid traverse (X/Y/Z): 20 m/min Swivel Head A-axis: +/- 270° Speed range: 20 - 7,000 rpm Gear stages: 2 Ihedpfxox U Rzzj Aalew Drive power: 45/30 kW Torque: 1,133 Nm Tool holder: SK 50 Big Plus Tool positions: 64 Tool length: 600 mm Tool diameter: 250 mm Tool weight: 20 kg Table size: 2,800 x 1,000 mm Max. table load: 6,000 kg Connected load: 80 kVA Machine weight: 29 t Space requirement (LxWxH): 6,380 x 5,135 x 3,250 mm Features: Chip conveyor Coolant system

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm tool taper HSK 100 swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec max. tool diameter 250 mm max. tool length 400 mm max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards Ijdpfx Aoxmag Ijalshw - incl. 1x workbench - incl. Ringler chip extractor

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm Main Spindle Speed range: 20 - 5,000 rpm Gear stages: 2 Drive power: 30 kW (100%) / 45 kW (40%) Torque: 1,050 Nm / 1,580 Nm Tool holder: HSK 100 Iodpfexb A Azex Aalshw B-axis swivel range: +/- 180° B-axis increment: 0.001° Work Table Clamping area: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Tool Magazine Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 s Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feed Rates Feed rate X, Y, Z: 0 - 20,000 mm/min Feed rate B: 10 min⁻¹ Power X, Z: 15.7 kW Power Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N MACHINE DETAILS Space Requirements & Weight Space requirement approx.: 8.0 x 8.0 x 3.3 m Machine weight approx.: 23,000 kg EQUIPMENT 2x tool cabinets for holders Ringler chip extractor Chip conveyor Coolant system High-pressure cooling Internal coolant supply Oil mist extraction Paper band filter Spindle oil cooler Blum TC 60 probe Electronic handwheel Automatic door

Condition: good (used), Swing over bed 425 mm Ijdpfohz D Euox Aalshw Distance between centers 1500 mm Spindle speeds 36-2240 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426 M, spindle speed (max.): 6,300 rpm, TECHNICAL DETAILS x-path: 1,200 mm y-path: 600 mm z-path: 700 mm Axes: 4 Ihsdpfxjwurwqj Aalow Speed: 20 - 6300 rpm Control: HEIDENHAIN TNC 426 M Table load: 800 kg Work table dimensions: 1,200 x 630 mm Tool holder: SK40 MACHINE DETAILS Machine height: 2,950 mm Machine weight: approx. 8,800 kg