Used Reiss Ordinat Iii for sale (795)

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Technical details: Power: 4.4 kW (5.98 hp) Lasdpfxoznncmo Akweh Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Location: available from stock in 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Lsdpjzlktpjfx Akwsah Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2000, loading space width: 40 mm, total length: 9,400 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting axle - Air suspension - Drum brakes = Notes = 2000 Van Hool 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT), ABS/EBS, SAF axles with drum brakes, 1st axle is a lift axle, 385/65-R22.5 tires (L: 4/13/8mm; R: 6/14/7mm), unladen weight 3,950kg, max. weight: 39,000 kg, Dutch registration. = Further Information = General Information Year of manufacture: 2000 Ledoz Dbg Uepfx Akweah Mileage: 228,518 km Registration number: OG-37-KJ Axle Configuration Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9000 kg; Tire tread left: 25%; Tire tread right: 40% Rear axle 2: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire tread left: 80%; Tire tread right: 90% Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire tread left: 50%; Tire tread right: 45% Weights Unladen weight: 3,950 kg Payload: 35,050 kg GVW: 39,000 kg Functional Body brand: Van Hool 3B2015 Condition Overall condition: average Technical condition: average Optical condition: average Further Information Please contact Arne Honingh for further information.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: Ljdsz Suarspfx Akwjah – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Lasdpfszulwzox Akwjh Catalog number: 7405 TECHNICAL DATA - Max cutting height: 150mm - Max element width: 700mm - Working width of the saw arbor: 530mm - Max saw blade diameter: 450mm (installed: 350mm) 350mm - Arbor bore diameter: 90mm From above: - Ratchets - 2 toothed draw shafts From below: - 2 smooth draw shafts - Saw arbor - Smooth draw shaft - 4 feed speed settings - Feed motor: approx. 2kW - Main motor: 30kW - Machine dimensions (L/W/H): 2400x1700x1900mm - Weight: approx. 3000kg - Polish made - Used machine, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to facilitate product identification. We only resell products that have already been introduced to the market by the manufacturer. We have no business relationships with the manufacturer.

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 215 mm, travel distance Z-axis: 762 mm, overall weight: 3,300 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details. • Swing over table: 220 mm • Distance between centres: 500 mm • Maximum machining diameter: 200 mm • Maximum workpiece weight between centres: 50 kg • Maximum workpiece weight in chuck: 20 kg • Grinding wheel dimensions: Ø305 × 25 × Ø127 mm • Grinding wheel speed: 1,880–2,210 rpm • Maximum peripheral speed: 30 m/s • X-axis rapid feed: 4,000 mm/min • Grinding head swivel angle: ±30° • Z-axis rapid feed: 8,000 mm/min • Minimum input increment: 0.0001 mm • Workhead spindle: Combined dead and live spindle • Workhead centre taper: MT No. 3 • Workhead through-hole diameter: Ø18 mm • Workhead speed: 10–500 rpm • Workhead swivel angle: +30° to -90° • Tailstock spindle travel: 20 mm • Tailstock centre taper: MT No. 3 • Coolant tank capacity: 120 litres • Lubricant tank capacity: 3 litres • Machine dimensions: 2,851 × 1,735 × 1,710 mm • Power supply: 200 V, 50 Hz, 3-phase, 3-wire • Total connected load: 15 kVA / 10.5 kW • Maximum full-load current: 50 A Lodjzuy T Dspfx Akwjah • Largest motor: 5.5 kW / 22 A • Control circuit: AC 100 V / DC 24 V • Condition: Operational

Year of construction: 2021, condition: excellent (used), Latest model Tomra Odenberg Halo III optical grader. Perfect for sorting greens, misshapes, mechanical damage, surface blemishes and size outliers. Very low running hours, only used for a short time and then put in to dry storage. Rare opportunity - find another one as new as this. Laedjxvt Htepfx Akwoh

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Laodpfxsz Hpazs Akweh Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: excellent (used), For sale is our Viscom AOI S3088-III in very good condition. Viscom S3088-III Year of manufacture: 11/2010 Serial number: 100967 Connection: 230/400V 3P/N/PE Frequency: 50-60 Hz Weight: 750 kg Operating system: Windows 10 Enterprise 2016 LTSB, 64-bit Processor: Intel Core i7-6700K, 4.00 GHz Ledpjz H Nl Rofx Akweah RAM: 32 GB Camera technology: 8M with color cameras and white LED lighting Sensor head: 4 cameras orthogonal (top view), 4 cameras lateral Software version: SI 9.70(11) Open eVision licenses: OCR and DMC Last calibration: 05.12.2025 Grayscale MFU from 03.12.2025: passed Geometric MFU from 03.12.2025: passed The system has been inspected and found to be in good working order. Functional video available. Inspection is welcome.

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Lasdpfx Aszqyxxokwjh Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Lajdpfx Akjzdza Dswjh Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. Lasdpfx Aeyrgq Eskwjh • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2436918, load capacity: 454 kg, mast type: telescopic, lifting height: 7,820 mm, platform length: 2,110 mm, platform width: 1,070 mm, overall weight: 2,135 kg, transport length: 2,320 mm, transport width: 1,190 mm, transport height: 1,900 mm, fuel type: electric, tire size: 16 x 5 x 12, color: red, Technical data Year of manufacture: 2020 Engine: Electric Lajdpfeyqzgrjx Akweh Working height: 9.82 m Platform height: 7.82 m Platform dimensions (LxW): 2.11 x 1.07 m Overall dimensions (LxWxH): 2.32 x 1.19 x 2.29 m Platform extension: 1.22 m Weight: 2,135 kg Load capacity: 454 kg Load capacity with distributed load: 318 kg Climbing ability: 25% Travel speed: 1.0 – 2.9 km/h Fully functional, general signs of use.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Slugger model with 12 station in special tooling Max. compression force of 120KN 16/20 station available in D tooling with 100KN compression force Square model with GMP construction. Optional electro magnetic clutch for Non pharma / heavy duty application ACVFD as an option for the main motor. High torque motor for slugging application. Ljdpforrgtrox Akweah Ideal for Slugging/Effervescent tablets/Veterinary/Non pharma applications. Load cell for compression force monitoring available as an option. 38mm diameter round tablet compressed with ease.

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Lodpszpyq Esfx Akweah

Condition: used, mileage: 292,630 km, power: 182 kW (247.45 HP), first registration: 04/2020, fuel type: diesel, number of seats: 26, gearing type: automatic, emission class: euro6, color: yellow, Equipment: ABS, air conditioning, electronic stability program (ESP), Reference number: 1203 Type: Solaris Urbino III 8.9 LE * First registration: 04/24/2020 * Number of seats (S1): 26 * Number of standing places (S2): 38 * Engine displacement: 6700 cm3 * Unladen weight: 9315 kg * Transmission type: Automatic (D/N/R) * Air conditioning Lajdpfj Aaup Ijx Akwjh * Convector heater * Radio * Seat belts * Child seat attachment * Wheelchair space * Video surveillance * Rear view camera * USB sockets * Destination displays front/side/rear + control unit * Entryway lighting * Mechanical folding ramp * Electric sunblind * 230 V and air connection at the front * Frame is clean Note: Vehicle may be registered – mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods/vehicle! All information is provided without guarantee. We reserve the right to sell in the meantime. We refer to our general terms and conditions.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2436368, load capacity: 227 kg, mast type: telescopic, lifting height: 7,920 mm, platform length: 2,130 mm, platform width: 710 mm, overall weight: 1,890 kg, transport length: 2,320 mm, transport width: 840 mm, transport height: 1,910 mm, fuel type: electric, tire size: 16 x 5 x 12, color: red, Equipment: UVV,

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2436378, load capacity: 227 kg, mast type: telescopic, lifting height: 7,920 mm, platform length: 2,130 mm, platform width: 710 mm, overall weight: 1,890 kg, transport length: 2,320 mm, transport width: 840 mm, transport height: 1,910 mm, fuel type: electric, tire size: 16 x 5 x 12, color: red, Equipment: UVV,

Condition: used, mileage: 189,000 km, power: 140 kW (190.35 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,500 mm, total width: 1,950 mm, loading space length: 3,280 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Towbar: Wiring for trailer socket, extended exterior mirror arm left/right, MBUX multimedia system (7" touchscreen), spare wheel with road tyres, spare wheel holder under rear frame incl. jack, cabin seats: comfort passenger seat, cabin seats: comfort driver's seat, jack. Lasds Aa N A Aspfx Akwjh Additional equipment: Overhead storage compartment above windscreen, storage compartment below dashboard on passenger side, rear tow hook, adaptive brake light, driver's airbag, hill-start assist, traction control system (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, cabin roof lining, automatic driving light activation, electronic brake force distribution (EBV), driver assistance system: Crosswind Assist, body/chassis: standard flatbed, Keyless-Start, communication module (LTE) for digital services, fuel tank: main tank 71 litres, steering wheel (mechanically adjustable steering column), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 3.0 litre - 140 kW CDI CAT, wheelbase 4325 mm, low-emission according to Euro 6, seat belt system with warning device (driver's side), seat covers/upholstery: fabric, steel wheels 6.5x16, AGM battery 70 Ah, ASSYST maintenance interval indicator, heat-insulating glazing, permissible gross weight 3.50 t. Cargo area length: 3.28 meters Payload: 1000 kg Wheelbase: 4.35 meters The vehicle is in very good condition!

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2426238, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 990 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Year of manufacture: 2019 Lasdj Adyr Aepfx Akwoh Engine: Electric Working height: 7.79 m Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with weight distribution: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Max. climbing ability: 25% Fully functional General used condition Delivery available upon request Rental available upon request

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2426228, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 990 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Year of manufacture: 2019 Engine: Electric Working height: 7.79 m Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with weight distribution: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Max. climbing ability: 25% Fully functional Lsdpfx Ao Adyrvokweah General used condition Delivery available upon request Rental available upon request

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 450 kg, lifting height: 9,900 mm, empty load weight: 2,300 kg, fuel type: electric, tire condition: 70 %, drive condition: 75 %, maximum load weight: 454 kg, Self-propelled scissor lift SKYJACK SJ III 4632 11.7 m working core. 317kg thr personal lift SKYJACK SJ III 4632 scissor lift for sale in excellent condition personal lift, work stand with extendable platform. Manufacturer: Skyjack year of manufacture: 2011 load capacity: 454 kg Working height: 11.7 m Raised platform height: 9.7m Total width: 1.9 m Lajdpfxougtlij Akwjh Total length: 2.3 m Gross weight: 2300 kg non-marking tires operating hours: 374 TROJAN MOTIVE batteries in good condition. built-in battery charger

Condition: excellent (used), FOD BYDGOSZCZ* DPPA III 50 650/140 multi-blade saw Catalog number: 7318 TECHNICAL DATA - max. cutting height: 140 mm - max. element width: 700 mm - working width of the saw mandrel: 650 mm - max. saw diameter: 400 mm - saw blade arbor diameter: 70 mm Laedpfxezxqypj Akwsh Top: - pawls - 2 toothed draw rollers Bottom: - pawls - 2 smooth draw rollers - saw mandrel - ribbed draw roller - stepless feed speed adjustment via frequency inverter - feed motor: 4.4 kW - main motor: 30 kW - machine dimensions (L/W/H): 2500x1400x1900 mm - weight: approx. 2500 kg – Made in Poland – Used machine, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to larger fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the product. We only resell goods that the manufacturer has previously introduced to the market. We have no business relationship with the manufacturer.

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,400 mm, total height: 3,170 mm, Year of construction: 1998, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC II aerial ladder – Registered: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 hours Base vehicle equipment: * Suspension type: leaf spring rear axle * Wheelbase: 4250 mm * Permissible gross vehicle weight: 15 t * 7-speed manual transmission * Fuel tank: 127 l, located under the platform at the rear Lasdexa Sbwspfx Akwoh * Differential lock in rear axle * Stiffer rear springs and shock absorbers * Front spring: torsion bar, reinforced stabilizer and shock absorbers * Co-driver's double bench seat * Exhaust pipe for fire department, positioned in front of the front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for co-driver * Cab rear wall with 2 windows * Electric window lifter on the right * Heated and electrically adjustable rear-view mirror with wide-angle mirror * Ramp mirror on the right * Rotating beacon, blue light, and siren * Front flashing blue light Aerial ladder equipment: * Metz aerial ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75m) Max. outreach angle: 75 degrees, Max. basket load capacity: 270 kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger system: horizontal-vertical, Variable outrigger width between 2,400mm and 4,500mm * Folding rescue basket for 3 people * 2 LED spotlights 24V at the front of the rescue basket * Load eye at the top of the lower ladder, on the reinforced ladder support, for lifting, lowering and pivoting loads * Mounting bracket for portable generator 5kVA on the turntable * 2 halogen spotlights 24V / 70W at the head of the lower ladder with Teleflex control from the main control station * 400V power supply, protected in the ladder support, to the top of the upper ladder including socket and power supply with plug from the generator on the turntable * Bridge cable from the head of the upper ladder to the rescue basket with 1 socket 400V and 2 sockets 230V in the rescue basket * Fixed water line in the lower ladder * Adjustable spray nozzle, mountable in the rescue basket * Storage for adjustable spray nozzle * METZ stretcher holder SLK 111 including storage on the platform * Box for storing the stretcher in the platform * Siren with 4 sound cups instead of BOSCH high-tone horn * Fixed charger 230V / 24V * Service booklet available, all maintenance performed annually ----Ready-to-drive vehicle from first owner, ladder system only works sporadically - defects present! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Ledpfx Ajk D Ez Iskwsah Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)