Used Reboring Machine for sale (65,061)

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos Todpjv Tpxqsfx Akiod -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Tsdpfx Ajzk Nmrjkisd

Condition: used, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Year of manufacture: 1987 Colour: Green Empty weight: 700 kg - Year: 1987 - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg Tsdpfxozkq Auj Akijd - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" * Tsdpfx Akezuxx Sjiod

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tsdszwc Sbjpfx Akijd Lukas van Rossum

Condition: used, Dimensions (LxBxH): 120 x 100 x 160 cm - Number of axes [pcs]: 3 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 500 - Table length [mm]: 1000 - Table width [mm]: 250 - Tool holder: ISO40 - Min. spindle speed [rpm]: 44 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 1200mm x 1000mm x 1600mm (l x w x h) Financial information Todpfszrx Rcjx Akied VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Todpozmxqrsfx Akiod Serial number: 210141 – Year of purchase: 2022 The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Tedjzmy Aijpfx Akisd

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 800 kg Price: On request Tjdpfx Aoztxnqekijd - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of manufacture: 2000 Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information Tjdjzrd Iaopfx Akiod VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Tjdpfx Aozrg T Eekiod Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: refurbished (used), Year of construction: 2015, operating hours: 33,630 h, ASCO A120P Dry Ice Pelletizer – Refurbished We have various new parts in stock for Cold Jet machines. A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transport. Specifications Brand: ASCO Type: A120P Operating hours: 33,630 hours Ready for immediate use Major maintenance performed (2024) The machine underwent extensive maintenance by ASCO Germany in late 2024. During this process, several critical wear parts were replaced, and the press unit was refurbished. Among the parts replaced: ✔ New press chamber kit ✔ New piston Tjdpfx Akozquixeijd ✔ New guide bushings ✔ New sintered bushing ✔ New hydraulic filter ✔ New solenoid valves ✔ New pressure regulator (latest version) ✔ Hydraulic valve replaced ✔ Various springs ✔ New seals ✔ Various fasteners Service documentation available The machine comes with the original documents, including: Original ASCO service report Test results after maintenance This confirms that extensive refurbishment work was carried out on the press chamber and hydraulic components. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine to buy, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders Tedpfxstq Nlce Akied approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Tsdpfx Aksulpmzoiod Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: good (used), Aksar AFM-BFM Rasgulla Gulabjamun making machine Rasgulla Gulabjamun making machine, ball forming machine is used for cutting and rounding various types of sweets and food products like rasgulla, gulabjamun, rasmalia, chumchum, peda, chocolate, coconut laddu, sweet balls, kachori, dates balls, riceball and various types of bakery, confectionery and indian snacks, 15L hopper, 10,000 pieces per hour, 1g to 100g, variable speed, mobile, 1Ph Tedjtu N Alopfx Akijd

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Tedohgihkjpfx Akisd Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: like new (used), 12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal Tsdpfxohpqvye Akiod

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 Todpfomcibwjx Akijd toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Tedpfx Aet I E T Aekisd

Condition: good (used), Direct from factory we have a Koenig bread system. This factory mainly manufactured pies so only had bread machinery as a sideline. Low running hours. inspection is welcomed near Cambridge, UK. Please note the photos show the machine before it has been cleaned, we have many other Koenig sections available too. Todpfx Akjw E D Ivsijd

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !! Tsdjwgnz Ajpfx Akijd

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 Tjdpfxsx Tg Axj Akiod 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Tjdpjxpfkkjfx Akied Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Tsdpeu R Sxxofx Akiod Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Year of manufacture: 2018 Colour: Grey Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 Tedpfx Aoyf Hc Iokijd - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels