Used Installed for sale (7,712)

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, working width: 520 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 500 kg, KOMFI AMIGA 52 Commercial Print Laminator. Production Speed: 25 meters per minute. Maximum sheet size B2. Fjdpfx Asx Ry H Eecwjpf Digital Metallic Foiling attachment fitted. Deep plie suction feeder with Becker pump. Auto sheet separation and delivery into the reception tray. Power supply: 400v 50Hz 3 Phase

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Fjdpfx Acjrz R Arjwepf Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Fsdox H Rhrjpfx Acwjpf Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Fodpfxoud Axge Acwopf

Condition: used, Year of construction: 1999, • Shaftless unwinder A • Shaftless unwinder B • Coating unit (adhesive application system) • Laminating unit • Winder (rewinding unit) • Film tension control system (including dancing rollers and load cells) • Automatic web guide unit • Rubber-coated impression roller • Decentrable rollers • Electrical, pneumatic, and control systems ADHESIVE SYSTEM • Solventless adhesive application system • Adhesive feed system • Metering rollers • Transfer rollers for glue application • Rubber-coated coating/impression roller • Integrated glue mixer (included in scope) • Minimum supply: at least 3 transfer rollers included PROCESSING CAPABILITIES • Designed for lamination of flexible films • Compatible with solventless adhesives • Continuous coating and laminating process • Rewinding of laminated material onto final reel • Adjustable coating quantity via metering rollers • Adjustable lamination pressure CONTROL AND SYSTEMS • Electric system with control cabinet • Pneumatic system • Film tension control via load cells and dancing rollers • Web guiding system for alignment Fsdpfx Aeyx Dk Rjcwopf • Vapour suction system • Rollers conditioning system • Optional corona treatment system TECHNICAL FEATURES • Professional industrial laminating machine • Continuous operation design • Multi-section configuration: unwinding, coating, laminating, rewinding • Designed for stable operation under controlled environmental conditions • CE compliant (European Machinery Directive) MATERIAL HANDLING • Dual unwinding system for two substrates • Precision tension control during processing • Rewinding system for finished laminate • Compatibility with different film materials (as per process requirements)

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service Fpedpfx Acjywcr Djwsf ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt Fjdpfx Acjywcrwjwepf The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller · Heaters, level switches, and power contactors have been replaced. Fpodpjyt Iprjfx Acwof · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance Fjdpfeyc Ig Ajx Acwepf — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: like new (used), functionality: fully functional, power: 250 kW (339.91 HP), fuel type: diesel, operating hours: 615 h, Complete firepack installation supplied by Van Wijk & Boersma Firpacks (NLD). The entire system comprises two diesel firepacks, each configured to deliver 700 m3/h at 8 bar in accordance with NFPA-20 regulations. An electrical control panel, type WB 882-D20, is installed in compliance with NFPA standards and includes a pressure switch. Each unit features a double-walled fuel tank with a capacity of 600 liters. • Engine brand: Scania • Engine type: DI-9-48A 10-14 • Pump brand: Aurora • Pump type: 8-481-17B • Year of manufacture: 2004 CHARACTERISTICS (per unit) • Pump capacity: max. 1050 m3/h • Pump pressure: max. 9.4 bar Fedpfoxdlmhex Acwepf • Engine power: 250 kW • RPM: 2050 • Operating hours: 460 – 615 hours

Year of construction: 1999, condition: used, machine/vehicle number: 20DKPE, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 20 cbm piece 1 used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted Color equipment paint RAL ; . However, you can always bring your own color wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Piece. 1 dipstick Piece. 1 venting nozzle Piece. 1 filling nozzle piece. 1 new limit switch piece. 1 new leakage detector with filled up leakage liquid piece. 1 conductor piece. 1 suction line Form . cylindrical storage tank with feet/console tank mass length ca 6.800 mm plus diesel pump 500 mm Fedpfx Aocl Sghocwepf diameter approx. 2.000 mm weight approx. 4.400 kg Storage above ground Compact diesel dispenser Penta with a digital display . Dispenser new . Hose length 3 mtr . On request also longer . Approved automatic nozzle . Pump 230 Volt max 60 Ltr/min. ===== Top on offer . Liquid fertilizer - AHL tank units in the size of 10,000-100,000 liters. Of course you can also design your tank system! All our equipment is extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. Price/ Shipping The price for the gas station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank Environmental Protection Wozniack

Condition: good (used), functionality: fully functional, type of input current: three-phase, Oil dehydration unit. Temperature: 0 - 82 °C Flow rate: 3 gpm Power: 520V/50Hz Heating: 12 kW Fpedpfx Acex Sxggjwsf Dimensions: 122 x 162 x 82 cm

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English. Fpjdowl Afyopfx Acwsf

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour. Fodpfx Asxw D Nhocwepf

Condition: good (used), Year of construction: 2012, Cooling/filter installation with vacuum filter Function: A vacuum pump directly connected to the filter drum's inner chamber draws the medium into the drum. During this process, contaminants are retained on the filter drum’s surface by a fine-mesh fabric. The vacuum increases due to the resistance caused by the accumulating filter cake. When a preset negative pressure is reached, the drum is automatically rinsed. Fjdpfx Acjxrnvuewopf An installed scraper chain removes the sludge. The system can be controlled either via a PLC controller or directly from the processing machine.

Year of construction: 2001, condition: used, functionality: not functional, machine/vehicle number: (H) 96801, Micronisation installation for PVC recycling Fodpfx Aexgh E Ejcwopf

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Fedpfx Aswfdpmscwspf Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use.

Year of construction: 2018, condition: excellent (used), Sanco Dosing Installation, Year of Manufacture: 2018 Fsdpfx Acjwf Izajwepf Consisting of: - 2x insulated 1200-liter tanks with manhole and agitator - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. We are happy to assist you further upon serious interest in this installation.

Condition: used, TBMA Galahad bag emptying installation, stainless steel bag emptying machine Type: 750 special All product-contact parts are made of stainless steel. Other parts are coated. Machine is in used condition and sold as is. Equipped with various feed conveyors Fodpfjwvli Asx Acwopf Optional: empty bag screw compactor Optional: pallet tipper with lifting table Capacity: 400 bags/hour See our other advertisements VMA Wekerom

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 3,000 rpm, table width: 1,200 mm, mount diameter: 50 mm, power: 0.028 kW (0.04 HP), SORALUCE TR-25 included installation and commissioning Year of manufacturing: 2002 Capacities / travel: Fpjdpfxjrp H D Tj Acwjf Axis (X): mm 2.500 Vertical (Y): mm 1.600 Ram (Z): mm 1.200 Table size: Length: mm 2.860 Width: mm 1.200 Painting: RAL 5005 and RAL 7035 Tool taper: ISO 50, DIN 69871 Form AD Main Spindle Drive: Power: 100 % ED KW28 Spindle speed range: Spindle speed: rpm-1 20-3.000 Feeds: X-, Y- und Z-Axis mm/min 2 – 12.000 Max. rapid traverse speed: X-, Y- und Z-Axis mm/min 15.000 Weight: kg 22.200 Heidenhain 426 Heidenhain CNC control 426M with digital drive technology, electronic handwheel HR410 Automatic Milling Head, Diagonal H26 Automatically indexing Soraluce "Diagonal" milling head, type H26 including a long spindle for internal coolant supply. 2.5° division in both joints and speeds up to 3000 rpm. Clamping via Hirth serration in both joints. Repeatability of +/-3 sec. or 0.002mm. FAG spindle bearing with steel balls. Includes air lock. Chip Conveyor Automatic Tool changer: Maximum Tool Diameter: 125 mm Max. Tool Diameter with Adjacent Slots Free: 250 mm Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Number of Magazine Slots: 40 Coolant lubrication system internally cooling 3D thermal expansion compensation Splash guard Our product line: RepairFIT RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line have been procured by us following a strict selection process and have undergone a thorough examination (Deep-Dive-Check). After intensive cleaning, any detected and obvious defects or errors have been professionally repaired by our expert service team. What does this mean for you? A RepairFIT offer is ideal for you if you're looking for a used machine while also wanting guaranteed process safety. With this option, you receive a high-quality CNC milling machine that is immediately ready for error-free operation. With our professional service technicians, we implement the commissioning in your premises in the shortest possible time. You can start production right away. This is a clear difference from an ordinary used machine purchase. This solution offers you guaranteed process and planning reliability at an attractive fixed price Project Execution: Benefit from our turnkey project execution, which is included in all lines: Our team of experts provides comprehensive support in optimally determining the machine's location, creating a professional layout, and fully integrating it into your manufacturing process. We ensure that your CNC milling machine is expertly installed, commissioned, and precisely aligned according to the manufacturer's specifications! All from a single source, in the end, simply a process-reliable machine that does what it's supposed to do.

Condition: new, Year of construction: 2025, filter unit special for laser machines till 6 KW laser head Fjdpelzi Rrjfx Acwepf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Weight: 840 kg Power: 8.5 kW Fodpfxeyxl Tye Acwspf Voltage: 220 V Date of manufacture: 2011 CE certified

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 70 t, For sale: a fully functional and well-maintained Husmann MP6070-TS waste compactor installation, currently still in daily operation. The installation is immediately ready for use and is particularly suitable for compacting and transferring various waste streams. Features: - Fully operational and functional installation - In daily use and well maintained - Includes two swap bodies for moving containers - Equipped with hydraulic container couplings and a hydraulic container locking system - Features a large feed hopper Fpjdoxuhtrepfx Acwjf - Can be easily filled with a wheel loader, excavator, or from a platform/ramp - Immediately available for use Containers are not included.

Condition: excellent (used), functionality: fully functional, Pomac Cyclone Installation with Pump System Fpsdpeyku Nyjfx Acwof Pump brand: Pomac Overall dimensions: Height 4000 mm Technical specification: - Drum screen: dimensions 1000 x 1800 mm - Collection tank: stainless steel, dimensions approx. 1270 x 1880 x 1350 mm - Circulation pumps (2 pcs): Pomac brand, made of stainless steel - Pump capacity: 35 m³/h each, pressure 4 bar Construction: - Equipped with a protective cover - The entire system is mounted on a robust steel frame - Supplied with a grated floor (platform) and access stairs The cyclone installation is an advanced liquid separation and circulation system, designed for effective process water purification or solids separation in the food industry. The use of two high-performance Pomac stainless steel pumps ensures stable flow and the required operating pressure for filtration processes. Thanks to the integrated design with platform and stairs, the unit provides safe and ergonomic service operation at elevation.

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Fpodoxtnfrjpfx Acwef Documentation available