Used Profiling Center for sale (17,839)

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, maximum machining length 1274mm, bar capacity 77mm, Blodpfx Adevgz D Eoxsp spindle speed 4,000rpm, milling speed 4,000rpm, 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit.

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Bjdpfexn Sf Sex Adxslp Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Dugard Mini Mill CNC Vertical Machining Centre Fanuc Oi, 4th Axis, 2011 Year: 2011 Model: MN965005 Control System: Fanuc Oi-MB X-Axis Travel: 450 mm Y-Axis Travel: 350 mm Z-Axis Travel: 380 mm Table Size: 700 × 320 mm Max Table Load: 150 kg Spindle Speed: 80–8,000 RPM Spindle Taper: BT‑40 Spindle Motor: Fanuc Version: 5.5 kW Siemens Version: 8.5 kW (specify if applicable) Toolchanger: 12-position Automatic Tool Changer 4th Axis: Included Bsdexpnlqopfx Adxelp Rapid Feed Rate: 36 m/min Working Feedrate: Up to 10,000 mm/min

Condition: used, Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Blodpsvu U Itsfx Adxop Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2002, x-travel 1850 mm y-travel 1250 mm z-travel 1525 mm Control 16 i- M Fanuc type of pallet-changer 2-fach size of pallet 1250 x 1000 mm tool change unit 80 fach tool taper ISO 50 0 30 kW max. workpiece weight 5000 kg turning speeds 20- 6000 U/min rotary table 360 x 1 ° feeds - automatic programming 0- 15000 mm/min rapid traverse 30 m/min Blodpfxjxukqgj Adxep total power requirement 60 KW weight of the machine ca. 27 t dimensions of the machine ca. 8,3 x 7,3 x 4 m 80 tool position ATC. We will supply 300 pieces SK50 holders along with the machine. Measuring tracer Renishaw, Cooling trough spindle and filtering arrangement, 50 bar, Chip conveyor and exhaust ventilation. Machine has worked for 28.000 spindle hours. Control: Fanuc 16i-M.

Condition: excellent (used), Year of construction: 2019, operating hours: 9,930 h, functionality: fully functional, machine/vehicle number: AA10001591, travel distance X-axis: 3,770 mm, travel distance Y-axis: 2,585 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 3,086 mm, feed length Y-axis: 2,185 mm, feed length Z-axis: 150 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 29 kVA, controller manufacturer: SCM, workpiece length (max.): 3,086 mm, workpiece width (max.): 2,185 mm, workpiece height (max.): 150 mm, total height: 2,190 mm, total length: 5,215 mm, total width: 3,472 mm, table width: 2,185 mm, table length: 3,086 mm, overall weight: 2,800 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 2,000 h, spindle motor power: 10 W, number of spindles: 1, number of slots in tool magazine: 19, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001591 Year of Production: 2019 Condition: Excellent Location: Northern Ireland Almost as new condition and well maintained In full working order and still in use Includes many extras for a cost free set-up Financial information VAT: The price shown is exclusive of VAT which is not applicable for purchasers outside the UK Duty: Shipments from Northern Ireland to the EU are excempt from customs and duty Price: As seen and excludes any moving of the machine or preparation for shipping Machine Specification: High Performance aluminium worktable 8 rectractable stops NC managed Two vacuum fields half and full table Vacuum cup set Automatic centralised lubrication system 2 off Becker 250/300 m3/hr vacuum pumps 9.5KW spindle 1500-24000 rpm with left and right rotation HSK F 63 quick release toolholder With exhaust hood for spindle 4 off air blowers on the spindle 1 off lateral pickup for aggregate tool High capacity toolholder with 19 places F12L drilling head comprising 4xleft and 4xright spindles 1off X and 1off Y double drilling heads 1off integrated blade in x axis Drill head complete with exhaust hood Bit speed 4500rpm 60mm stroke Blade 5500rpm Tool length detection system Bljdpfew Nyd Tjx Adxsp "Tecpad" wired remote control with 7 inch touch screen colour Eye-M PC integrated touchscreen control station Maestro CNC with 2 off dongles Extras include in price: Ducting for the machine to an extraction unit Switchgear and cables Tooling approx 20 HSK 63F ER32 holders plus collets 4 off EMST extract max tool holders PCD cutters Skimming tool Maestro nesting Alphacam 1 seat Full original documentation is available Also available: Extraction system to suit €4000 Compressor to suit €4500 Panel lifting unit to suit €12000

Condition: ready for operation (used), - decoiler 10 ton + lift - straightener punch corner notcher unit (3+4 rollers), incl 5 hydraulic punch possibilities fixed width: 1350 mm - 12 rollforming stations with variabel width + 1 fixed width station for optical profiling distance between stations: 400 mm axle dia: 50 mm axle length: 110 mm min axle-axle: 130 mm max axle-axle: 200 mm variable opening: 300 - 1400 mm fixed width: 1350 mm Bledpfoxqh Tqsx Adxsp - Van Otterloo 4 columns flying shear cutting/punching (type HVS 60.06.1260 PRM 012) - max shear capacity: 1350 mm - conveyorbelt - NN pneumatic stacker (max length 10000 mm) - controlunit - currently equipped with light rolls for undulated profiles - TOTAL LENGHT 39 meter ( with the conveyor belt)

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Bljdpfxsxndrdj Adxep Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Price: On request Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - Serial number: 12/50 - Motor power: 18.0kW - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bledpfx Adjww Eqcsxsp Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 50 T Offer Details Stock number: 1039-9277 Type of machine: Universal Machining Centre Manufacturer: DECKEL MAHO Model: DMU 50 T Year of manufacture: 1998 Control: TNC 426M Heidenhain Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex site Additional information: CNC Universal Machining Centre DECKEL MAHO - DMU 50 T - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manual via handwheel) WE OFFER YOU: Bljdpfx Asxt Eyyedxsp - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Travel (X-axis): 500 mm Travel (Y-axis): 400 mm Travel (Z-axis): 400 mm Control: TNC 426M Heidenhain Main spindle: - Speed range (main spindle): 20 – 9,000 rpm - Drive power (main spindle): 9 / 13 kW - Max. torque: 57 / 82 Nm - Tool interface: ISO 40 DIN 69871 Swivel rotary table: - Table size: 700 x 500 mm - Swivel angle (B): 105° (-10°/+95°) manual - Rotary axis (C): 360° manual - Max. table load: 200 kg - Number of T-slots: 7 - T-slot pitch: 63 mm - T-slot width: 14H7 mm - Center bore: 30H7 mm Tool changer: - Tool magazine positions: 16 - Tool holder: ISO 40 DIN 69871 - Max. tool length: 290 mm - Max. tool weight: 6.0 kg - Max. total tool load: 50 kg Feeds: - Feed rate: max. 10,000 mm/min - Rapid traverse: 12 m/min - Programming increment: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m Equipment - Documentation - Chip tray - Coolant system - B-axis manual - C-axis manual - Swivel rotary table - Tool changer (16 positions) - Electronic handwheel - Operating Mode 4

Condition: used, Year of construction: 1999, x-travel 1400 mm y-travel 1200 mm z-travel 1000 mm Control 15i-M Fanuc type of pallet-changer 4- fach size of pallet 1250 x 1000 mm tool change unit 200 fach tool taper HSK 100 0 22 kW max. workpiece weight 2000 kg turning speeds 8- 3000 U/min rotary table 360 x 1 ° feeds - automatic programming 0- 10000 mm/min Bljdpfx Adjxukpijxop rapid traverse 10 m/min total power requirement 84 KW weight of the machine ca. 23 t dimensions of the machine ca. 11 x 8 x 4 m CNC- JIG BORER ! 200 tool position ATC. We will supply 90 holders along with the machine. Measuring tracer Renishaw, Cooling trough spindle and filtering arrangement, 12 bar, Chip conveyor and exhaust ventilation. Machine was complete refurbished in 2017 and has only worked 4800 spindle hours since that date. Control: Fanuc 15 i-M.

Condition: like new (used), Year of construction: 2015, operating hours: 1,885 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 850 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece height (max.): 1,300 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,300 kg, total height: 3,665 mm, total length: 5,534 mm, total width: 3,427 mm, rotary table diameter: 21,500 mm, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2015 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30/180ª Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø800 Maximum workpiece size (D x H) mm: Ø900x1300 Max. workpiece weight kg: 1300 Table rotation speed rpm: 800 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/24 (40%ED/cont) Spindle torque Nm: 111/77 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Bjdpextbhmjfx Adxelp Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time s: 4.2 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Tool breakage probe Laser tool measurement for measuring tool length and diameter 4th axis Paper band filter Machine running times Under power: 1885 Spindle Working: 515 Basic machine dimensions / weight Length mm: 5534 Width mm: 3427 Height mm: 3665 Weight kg: 21500

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Tekna TK 145/12 CNC double mitre saw. Cutting length: 6000 mm. Saw blade: 500 mm. Movement of head (mobile) for determining cutting length. Conveyor belt for waste pieces. CNC control. Exceptional double mitre saw. Special fabricated and welded steel bed frame with precision-machined slideways for the mobile head. Pneumatic head tilting from 22° 30' to 90°. Automatic descent of full safety protections. 15" colour LCD VGA screen (640x480). Accuracy: ± 0.1 mm. Bedpjxr Nqmofx Adxolp

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Bodpfjxgqwdsx Adxelp Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: as good as new (ex-display), Year of construction: 2024, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,030 mm, OKK Horizontal Machining Center, 1 unit HM6300 FANUC 31-B BT50 12,000rpm (MS), 45/30/26kW, 60-tool magazine (MG) 2APC Rapid traverse: X & Z at 75 m/min, Y at 54 m/min CTS (Through-Spindle Coolant) preparation High-pressure unit (70 bar) Tool breakage detection in MG, contact type Lift-up chip conveyor – hinge type for steel (Type A) SOFT AC adaptive control function FASTEMS interface (excludes front door) Automatic restart upon tool damage Custom macro interrupt 116-tool magazine (60 tools x 2 lines) BIG PLUS spindle Bodsxuhzpjpfx Adxolp Manual Guide i: milling animation Oil skimmer Memory: total 1,280 MB (512KB) per program, up to 1,000 programs Extended parts program editing Run hour & parts counter display Tool life management (256 sets) Work coordinate system (48 sets) Custom macro B, 82 variables Helical interpolation Tool offset (200 sets)

Condition: used, Year of construction: 2002, functionality: fully functional, MORI SEIKI - SL 204 MC Offer Details Stock Number: 1039-9201 Type of Machine: CNC Turning and Milling Center Manufacturer: MORI SEIKI Model: SL 204 MC Year of Manufacture: 2002 Control System: MSG 805 MAPPS Location: D-59302 Oelde, Germany Country of Origin: Japan Delivery Time: by arrangement Freight Terms: ex site Additional Information CNC Turning and Milling Center MORI SEIKI - SL 204 MC WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery available (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: 390 mm Turning length: 507 mm Control: MSG 805 MAPPS Maximum turning diameter: 390 mm Swing diameter over bed: 680 mm Swing diameter over cross slide: 510 mm Distance between centers: 618 mm Main Spindle: Speed range – main spindle: 45 – 4,500 rpm Drive power – main spindle: 11 / 7.5 kW Spindle bearing diameter: 110 mm Spindle bore: 73 mm Max. bar diameter: 51 mm Spindle nose: JIS A2-6 Chuck diameter: 210 mm C-axis: 0.001° Axis Travels: x-axis: 235 (195+40) mm z-axis: 520 mm Tool Turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tool stations: up to 3,000 rpm Drive power of driven tool stations: 5.9 / 4.5 kW Shank height for square tools: 25 mm Maximum drill shank diameter: 50 mm Turret indexing time: 0.2 sec Tailstock: Tailstock travel: 490 mm Quill diameter: 85 mm Tailstock taper: MT 4 Quill stroke: 120 mm Feeds: Rapid traverse X: 18 m/min / Z: 24 m/min Feedrate range: 0 – 1,260 mm/min Total power requirement: 30.1 kW Approx. machine weight: 4.5 t Space requirements approx.: 5.0 x 2.5 x 2.5 m Accessories - Documentation - Chip conveyor - Coolant system - Tailstock - Hydraulic unit - 3-jaw chuck Kitagawa BB208 Bjdpfxsxt Ervj Adxolp - Tool turret - Driven tool system - C-axis - Tool presetting - Parts catcher - 10x driven tools - Various tool holders - Set of 6 clamping jaws

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T Blodpoxfa Ipjfx Adxop SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Bljdpfxsxrr I Ie Adxsp Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Bledpfeur Hfzox Adxsp Fanuc 310is controller

Condition: used, Year of construction: 2008, functionality: fully functional, DMG MORI SEIKI - DMC 1035 V ecoline Offer Details Stock number: 1039-9218 Bodext Ec Iepfx Adxolp Type of machine: Vertical Machining Center Manufacturer: DMG MORI SEIKI Model: DMC 1035 V ecoline Year of manufacture: 2008 CNC Control: 810 D Powerline Siemens Location: D-59302 Oelde, Germany Country of origin: - Availability: by arrangement Delivery terms: ex site Additional Information: CNC Vertical Machining Center DMG MORI SEIKI - DMC 1035 V ecoline - Only 3,800 spindle hours WE OFFER YOU: - workshop-tested machines - loaded onto truck free of charge - NO auction fees - delivery possible (at extra cost) - unloading and commissioning (at extra cost) Technical Specifications: Travel X-axis: 1,035 mm Travel Y-axis: 560 mm Travel Z-axis: 510 mm Control: 810 D Powerline Siemens Main spindle: - Speed range (main spindle): 20 - 8,000 rpm - Drive power (main spindle): 13 / 9 kW - Max. torque: 83 / 57 Nm - Tool holder: SK 40 Worktable: - Table clamping area: 1,200 x 560 mm - Max. table load: 1,000 kg - Table height above floor: 720 mm - T-slots: 4x H12 / 1x 14 H7 Tool changer: - Number of tool stations: 20 positions - Max. tool diameter: 80 mm - Max. tool diameter with free adjacent pocket: 130 mm - Max. tool length: 300 mm - Max. tool weight: 6.0 kg - Tool change time: 1.6 sec - Chip-to-chip time: 7.0 sec Feeds: - Feed rate: 20,000 mm/min - Rapid traverse: 25 m/min Total connected load: 17 kVA Machine weight approx.: 4.1 t Space requirements approx.: 4.0 x 4.0 x 2.5 m Equipment/Accessories: - Documentation - Signal lamp - 20-position tool changer - Coolant system - Chip conveyor - Electronic handwheel

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE Bodpfsxfazpjx Adxslp MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 ATC 10 PLUS HIGH SPEED SPINDLE COOLANT SYSTEM SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Condition: used, Year of construction: 2003, functionality: fully functional, GILDEMEISTER - CTX 310 V3 Offer Details Stock number: 1039-9126 Machine type: CNC turning and milling center Manufacturer: GILDEMEISTER Model: CTX 310 V3 Year of manufacture: 2003 Control system: 840 D Siemens Storage location: D-59302 Oelde Country of origin: Italy Delivery time: by arrangement Basis of delivery: ex location Additional information: CNC Turning and Milling Center GILDEMEISTER - CTX 310 V3 - incl. bar loader IRCO Breuning - incl. 2x collet chucks - incl. 2x three-jaw chucks incl. various jaw sets - various VDI30 turning tool holders - various FZ tubes - approx. 20x 173E collets - collet sleeve for 185E collets (for bars up to Ø50) - 11x 185E collets WE OFFER YOU: - workshop-tested machines - free loading onto truck - NO auction fee - possible delivery (at extra charge) - unloading and commissioning (at extra charge) Technical Details Turning diameter: 210 mm Turning length: 580 mm Control: 840 D Siemens Centre height: 190 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 260 mm Main spindle: Speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 10 / 7.5 kW Max. torque: 115 / 86 Nm Spindle bore: 68.5 mm Usable bar diameter: 51 mm C-axis: 0.001° Travels: Travel - X: 185 mm Travel - Z: 455 mm Turret: Number of tool positions: 12 stations Tool mounting: VDI 30 Driven tool stations: 6 stations Tailstock: Tailstock travel: 400 mm Max. thrust: 4,000 N Feeds: Rapid traverse: X: 20 / Z: 30 m/min Feed force: 4.5 kN Total power requirement: 21 kW Machine weight approx.: 3.2 t Space required approx.: 8.0 x 2.2 x 2.0 m Accessories Documentation Chip conveyor Tailstock Coolant system Parts catcher C-axis Signal lamp Driven tool stations Bar loader: IRCO Breuning Turning tool holders: various Bsdpfextpfgex Adxjlp Collet chucks: 2x Three-jaw chuck: ROTA NCW 185-46 Driven tools: 4x X / 2x Z

Condition: used, Year of construction: 2002, DECKEL MAHO - DMF 220 linear Offer Details Stock number: 1039-9078 Machine type: Vertical Machining Center Manufacturer: DECKEL MAHO Model: DMF 220 linear Year of manufacture: 2002 Control system: 840 D Powerline ShopMill Siemens Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: By arrangement Freight terms: ex site Additional information: CNC Vertical Machining Center DECKEL MAHO - DMF 220 linear - From single-part production (aluminum, brass, and stainless steel) - Including work area partition - M26 function (switching to air blast through the spindle center) - New ball screw on Z-axis including bearings (April 2015) - New milling spindle (2016) - Spindle hours: approx. 11,966 h - WITHOUT vises WE OFFER YOU: - Workshop-inspected machines - Free loaded onto truck - NO auction fees - Delivery possible (for an extra charge) - Unloading and commissioning (for an extra charge) Technical Data Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Control: 840 D Powerline ShopMill Siemens Main Spindle: - Speed range: 20 - 12,000 rpm - Drive power: 35 / 25 kW - Max. torque: 130 / 87 Nm - Tool holder: SK 40 - Internal coolant supply: 40 bar Work Table: - Clamping surface: 2,600 x 600 mm - Max. table load: 2,200 kg - Number of T-slots: 6 - T-slot width: 18 H7 mm - T-slot spacing: 100 mm Tool Changer: - Number of tool pockets: 30 positions - Max. tool length: 300 mm - Max. tool weight: 6 kg - Max. tool diameter: 80 / 125 mm Feeds: - Feed rate: 20,000 mm/min - Minimum input increment: 0.01 mm - Rapid traverse (X / Y / Z): 100 / 50 / 50 m/min Measuring System: - Resolution: 0.001 mm Overall power requirement: 60 kVA Machine weight approx.: 12.5 t Space requirement approx.: 6.0 x 3.7 x 2.9 m Equipment Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply: 40 bar Hydraulic unit Electronic handwheel Work area lighting Tool changer: 30 positions Bodpfx Adoxtpdpexslp Paper band filter Probe: Heidenhain TS 631 Partition wall

Condition: used, Year of construction: 2003, functionality: fully functional, REIDEN - BFR 22 Offer Details Stock number: 1039-9086 Machine type: Universal Machining Centre Manufacturer: REIDEN Model: BFR 22 Year of manufacture: 2003 Control: TNC 430 Heidenhain Location: North Rhine-Westphalia Country of origin: Switzerland Delivery time: by arrangement Freight terms: ex site Additional Information 4-axis universal machining centre REIDEN - BFR 22 WE OFFER YOU: • Workshop-inspected machines • Free loading onto truck • NO auction fee • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details X travel: 2,000 mm Y travel: 1,000 mm Z travel: 1,200 mm Control: TNC 430 Heidenhain Main spindle: Speed range – main spindle: 20 – 5,000 rpm Gear stages: 2 Drive power – main spindle: 30 (100%) / 45 (40%) kW Torque: 1,050 / 1,580 Nm Tool holder: HSK 100 Swiveling: B: +/- 180° B-axis increment: 0.001° Worktable: Table clamping surface: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Bedpfxextpbue Adxslp Tool magazine: Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 sec Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feeds: Feed rate X, Y, Z: 0 – 20,000 mm/min Feed rate B: 10 1/min Power X, Z: 15.7 / Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N Total power requirement: kW Machine weight approx.: 23 t Space required approx.: 8.0 x 8.0 x 3.3 m Accessories • Chip conveyor • Coolant system • High-pressure coolant • Internal coolant supply • Oil mist extraction • Paper band filter • B-axis 0.001° • Spindle oil cooler • Probing system: Blum TC 60 • Electronic handwheel • Automatic door • Vice: 4x • Clamping table: 2x (50 x 50 x 37 cm)

Condition: used, Year of construction: 2001, functionality: fully functional, MAZAK - Variaxis 200 Offer Details Stock number: 1039-9049 Machine type: Vertical Machining Center Manufacturer: MAZAK Model: Variaxis 200 Year of manufacture: 2001 Control unit: Mazatrol Fusion 640M Location: D-59302 Oelde Country of origin: Japan Delivery: immediate Freight terms: ex location Additional information: CNC Vertical Machining Center MAZAK - Variaxis 200 - 5-axis WE OFFER YOU: - Shop-inspected machines - Loaded on truck, free of charge - NO auction fee - Delivery available (surcharge applies) - Unloading and commissioning (surcharge applies) Bledpfsxtpa Rex Adxjp Technical Details Travel (X): 510 mm Travel (Y): 510 mm Travel (Z): 460 mm Control: Mazatrol Fusion 640M Main spindle: Max. speed: 12,000 rpm Drive power - main spindle: 22 / 15 kW Spindle taper: ISO 40 Spindle diameter: 80 mm Acceleration 0 - 12,000 rpm: 1.7 sec Table clamping area: 500 x 400 mm T-slots: 5 x 18 mm T-slot spacing: 80 mm Distance spindle / table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Swivel range A-axis: +30 / -120° Rotary range C-axis: +/- 360° Tool changer: Number of tool stations: 40 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent positions free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip time: 4.5 sec Feed rates: Feed speed X/Y/Z: 1 - 50,000 mm/min Rapid traverse X/Y/Z: 50 m/min Indexing A + C: 0.001° Swivel time 90°: A/C: 1.9 / 1.5 sec Total power requirement: 51 kVA Machine weight approx.: 7.5 t Space requirement approx.: 3.4 x 3.7 x 2.8 m Accessories Hydraulic unit Coolant system Chip tray Tool measurement Documentation