Used Profiling for sale (5,308)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system Fpodpfx Afsri Slmonjc The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: RoboRail, type of input current: three-phase, working range: 12,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, overall weight: 6,500 kg, input voltage: 400 V, total width: 3,200 mm, total height: 2,600 mm, total length: 20,000 mm, workpiece weight (max.): 550 kg, table length: 12,500 mm, cutting current: 125 A, working length: 12,500 mm, height adjustment type: mechanical, input frequency: 50 Hz, ambient temperature (max.): 45 °C, RoboRail: All-in-one Robot Plasma Cutting Machine We regularly hear from manufacturers that automation is not for them because everything they do is different, but that is precisely what makes automation so important! With the RoboRail, each individual part can be different and the plasma cutting machine will cut and deliver the parts 1-for-1, directly from the CAD files. Does your project require complex cuts? Send it to the RoboRail. Does your project require a wide variety of delivered profiles? Send it to the RoboRail! This machine will become the workhorse of your factory, giving you time to focus on what your company does best! Easy design input: Import files from SDS2, Tekla, or a Solid model. Or simply draw your design on the machine work surface. Optimal material usage: No more waste with HGG-optimized nesting. The more files you upload, the smarter the nesting process becomes. Seamless processing: Upload your file and RoboRail takes over. Fpedpfx Afjq Nz Skjnoc Automatic loading of material and accurate determination of starting point. No need for operator intervention during the cutting process. Perfect results, every time: Get flawless cut steel, exactly matching your CAD design. Experience uninterrupted production with seamless repetition. RoboRail ensures readiness for the next production step. This machine is available in several configurations, including variants with different maximum material feed lengths. Based on your selected configuration, we can provide you with an appropriate price proposal. Please refer to our brochure for a complete listing of available options. If you have further questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) Fpodpfxowzzlwj Afnoc - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Fjdpsxyu Itefx Afnspc

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Fsdpfxexixrhj Afnspc Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 155 - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 2013, number of rollers: 3, shaft diameter: 130 mm, rotational speed (distance/time): 6,000 mm/min, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Fpjdpfx Aeyha I Aofnjc Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Fpedpfx Aexl Sq Aofnoc Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Year of construction: 2019, condition: ready for operation (used), number of axes: 4, Machine tool manufactured in 2019... This Elumatec's Aluminum Profile Processing Line – SBZ 131 + DG 104 offers a complete processing line for aluminum and steel profiles. It features an integrated solution for cutting, mitre cutting, and complex profile machining, optimized for serial production. Consider the opportunity to buy this Elumatec's Aluminum Profile Processing Line – SBZ 131 + DG 104. Contact us for further details. • Complete processing line for aluminum and steel profiles • Ready-to-run configuration for immediate production • Industrial environment; very good overall condition • Integrated solution covering cutting, mitre cutting, and complex profile machining • Working length: 7.2 m • Capabilities: • Complete profile machining in a single setup • Turret tool system with fast tool change • High industrial precision • Optimized for serial/mass productionDouble Mitre Saw • Cutting length: 6.0 m • Features: • Pneumatic tilting and rotation • Large-diameter saw blades • High precision and repeatability • Minimal material wasteApplications / Ideal for • Aluminum windows and doors manufacturers • Industrial profile processors • Façade systems and structural profile manufacturers Fodpfx Afjyic Tbonopc • Plants expanding capacity or upgrading technology

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position Fpjdpfsxf Uudox Afnec - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: new, shaft diameter: 60 mm, – Shaft diameter 60 mm – The lower two rollers are hydraulically adjusted – Usable in horizontal/vertical position – Three driven rolls – NC control (7-inch touchscreen) Fpedpfx Aoyh R Haofnec – 2 speeds – Brake motor – Overload protection system – Roller diameter Ø177 mm – Emergency stop – Documentation – 400V

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Fjdpfxeyhcabe Afnspc Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2015, condition: ready for operation (used), This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information. • Machine Type: Modular Gear Machining Center / Multi-Process Gear Production System • Machine Concept: Flexible modular system for dry machining of gears and transmission components. Configurable with multiple process modules according to customer requirements. • Polygon and face slot machining • Gear and spline cutting (rotative cutting, hobbing, front-face gear cutting) • SCUDDING® internal and external gear generation • Gear tooth pointing (rotative and indexing modes) • Chamfering and deburring (ZEM series) • Shifter stop machining for synchronizer sleeves Fpjdpfxex Imuqe Afnjc • Free programmable tool/workpiece synchronization • Modular design with different machine sizes • Single or multispindle configurations • Short cycle times • Parallel processes possible • Reduced setup and operating costs • Ergonomic and maintenance-friendly access • Suitable for dry machining • Gear quality DIN 5–7 (with SCUDDING®) • Surface roughness Rz 2–3 • High cutting stability and precision • Automotive gearbox components • Synchronizer gears • Shafts and gear wheels • Internal and external splines • Belt pulley profiles • High-precision gear components

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 Fjdol Nbqcjpfx Afnjpc (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Year of construction: 2001, total length: 1,200 mm, total width: 800 mm, total height: 1,700 mm, Empty weight: 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 371 Fsdpfx Aewu Tnkofnspc - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, BPR BA 35 CNC Three-Roller Ring Bending Machine, Hydraulic AS-NEW CONDITION MACHINE Shaft diameter: 35 mm Roller diameter: mm on request Fpjdpsyiutpofx Afnec Shafts made of high-strength steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft rotation (variable): 0-30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roller Three powered rollers with smooth surface BPR Probending CNC electronic control system Hydraulic cylinder pressing force: 5,500 kg Working pressure: 190 bar

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Fpsdpfow I Tt Sox Afnsc Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: good (used), Year of construction: 1999, Length:1800mm Width:1900mm Height:2200mm Weight:2900kg Fedpfx Afeycu E Ejnepc

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available. Fodpefrbckjfx Afnjpc

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW Fedpfxevf Riue Afnspc weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Fpsdsvibc Hspfx Afnjc Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Year of construction: 2024, condition: as good as new (ex-display), XX100329 FMC 120 - CNC machining centre 1x PR204851 5-position automatic tool magazine (ISO 30) 1x PR-28965 Rotation of the work table to intermediate angles with manual stop Fjdeyfg Uwspfx Afnjpc 1x ZP714617 Custom 2D milling module FST CAM 4 1x PR-27602 TOOL SET ALUMINIUM TYPE 1 1x PR207680 4 motorized clamps – 2 pneumatic stops

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Fpsdpjyhcl Djfx Afnoc Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Fodsyhckajpfx Afnjpc Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: used, For profiling and contour milling of windows, doors, individual parts, and similar items with continuous profiles, including mechanization for one-person operation. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, synchronizing device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 4. Profile milling unit, horizontal lower, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, Fedpfxelf H S Ae Afnjpc Contouring carriage for narrow and short sashes, PC control Nexus.

Condition: used, for profiling and rebating windows, doors, individual parts and similar components with continuous profiles, including return transport, Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, Fodjlf H Suspfx Afnepc 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.