Used Profile Milling for sale (14,508)

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools. Bdjdpfx Ao Aguv Eokioi

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Bsdpfx Ajyhgkdskiedi Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: excellent (used), Catalog number 7248 TECHNICAL DATA - max. workpiece height 160mm - spindle working length 250mm - spindle diameter 40mm - max. tool diameter 220mm - worktable dimensions (length/width) 420x1010mm - motor 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter 180mm - dimensions (length/width/height) 1500x1010x1560mm - weight 689kg Bdjdpo Af Iz Iofx Akioi ADVANTAGES – Made in Germany – Used milling machine, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: Bdedpfx Aezv Eaxjkisi 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Workpiece and profile stop good condition cleaned function tested partially refurbished Manufacturer: Festo Type: UP 65 Machine No.: 771226 Number of spindles: 1 Spindle diameter mm: 40 Clamping height / width mm: 200 Working width mm: 200 Profile depth mm: 65 Milling height mm: 110 Tool diameter mm: 250 Rotational speeds RPM: 4300 Table size mm: 660x350 Bdjdpfx Akozkvyrsiji Lift table pneumatic Profile stop Workpiece clamping pneumatic Motor kW: 7.5 Dust extraction connection mm: 100 Space requirement approx. L x W x H mm: 1300x700x1200 Total connected load: 7.5 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Bodpfx Ajyr E Ezskiedi Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Bdsdjzvzu Sopfx Akioi

Condition: used, A batch of various Leitz profile cutters in very good second-hand or as-new condition. Technical data: - D: up to 148 mm Bedezryfnspfx Akisdi - Bore: 30 mm - Width: up to 80 mm - Marking: BG-Test

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC Bdodpfx Akeyn Rdujiji HEIDENHAIN TNC 530 HSCI

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg Bdodocg Al Sjpfx Akiji

Condition: like new (used), Double-sided profiling milling and grinding machine, model Uinze 4T2500STD - Year of manufacture: 2023 - New price: €64,000 - Machine is equipped with 2 special carbide milling heads and 2 grinding units - Weight: 4300 kg - Safety fence: 800 kg, safety roller gate: 300 kg - Working length: 2500 mm, working width: 170 mm - Motor power: milling unit 4.5 kW, grinding unit 4.5 kW - Table return speed: 80-100 m/min Bsdpfxezqgmco Akiedi - Milling speed: 4000 rpm

Condition: used, functionality: fully functional, P Macchine 03P – Industrial Machine (Year 2002) Manufacturer: P Macchine s.r.l. Model: 03P Year of manufacture: 2002 Serial number: 03P0100071 Location: Finland Country of origin: Italy CE marked: Yes Description P Macchine 03P is a robust Italian-made industrial machine designed for professional use. The machine is CE certified and suitable for continuous production. Its solid construction and straightforward technology ensure reliable operation and easy maintenance. Technical specifications Voltage: 220–240 V Phase: 1~ (single-phase) Frequency: 50–60 Hz Power: 0.75 kW × 3 Current: 7 A Spindle speed: 12,000 rpm Operating air pressure: 6–7 bar Air consumption: 2 Nl/s Weight: 290 kg Bjdpfx Ajx Rvmujkiodi Additional information Test run possible by appointment Buyer is responsible for loading, transport, customs and all related costs All details to be verified with the seller prior to purchase 📩 Contact us for price, additional photos and further information

Condition: used, Year of construction: 1966, functionality: fully functional, spindle diameter: 30 mm, table width: 125 mm, We are selling 6 WEINING thickness planers. We are also selling a feed device to be used with the machines. The machine has an exceptionally robust cast iron housing. Bdedpfx Ajz Eunhokiei It is a very well-maintained and fully functional machine.

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg Bsdpfxoxrlgws Akisdi 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table Bdsdpfx Akozuzfhjisi - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min Bdedpfx Aoua Swwekiji

Condition: excellent (used), functionality: fully functional, Catalog number 7364 TECHNICAL DATA - max. workpiece height: 160mm - spindle working length: 250mm - spindle diameter: 40mm Bsdoztaq Topfx Akisdi - max. tool diameter: 220mm - worktable dimensions (length/width): 410x1000mm - motor power: 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter: 160mm - dimensions (length/width/height): 1070x1260x1400mm - weight: 650kg ADVANTAGES – Made in Germany – Additional set of milling cutters + copy – Unpainted – Used milling machine, very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam Bsdpfxov Ucbnj Akiodi - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Condition: good (used), Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Bsdpfey Iwvrex Akiedi Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Condition: used, Wema Probst profile milling machine Main motor: 11 kW Disassembled and ready for loading. Bdedpfoc N N U Nsx Akioi

Condition: used, Adjustable cutters on a hydraulic sleeve for the production of log planks (tongue and groove). Current settings: Groove profile width: 58.45 mm Tongue profile width: 53.25 mm Technical data: Bdsdpfszvnbfsx Akioi - Cutter: HW - Cutting circle (ø): ~ 160 mm - Bore: 50 mm - Material: Steel

Condition: used, Second-hand Leitz Variform profile cutter for woodworking applications. Technical data: - Blade: Z4 Bdodpfx Ajzr D Srskiei - Flight circle (ø): 165 mm - Bore: 40 mm - Marking: MEC - Length: 46 mm - Material: Steel

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence Bdedpfx Akoznlkzeioi • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Drive: Track Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE 4 x track drive Working width: 2235 mm Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Bsdpfjuxu Eqsx Akiodi Rear-view camera Weather protection roof, foldable Driver's seats Work lights Cleaning system CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 Bedpeyahv Sjfx Akiedi S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.