Used Pot for sale (3,095)

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power: 450.0A - Power: 50.0kVa - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedjwyktnopfx Admott Lukas van Rossum

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Table: 1000 x 1000 mm Gtedpfx Aewffz Dedmot Height: 1000 mm Weight: approx. 650 kg In good condition.

Condition: good (used), Year of construction: 2019, operating hours: 15,224 h, load capacity: 600 kg, fuel type: electric, empty load weight: 345 kg, mileage: 15,224 km, This Translift is from 2019 and is in good condition;Capacity of 600 kg;Loading area 1200 by 600 mm;Equipped with a 2 x 12 v battery with a charger.Video to follow Gtsdpfev Nyvljx Admst

Condition: used, spotlight: Max. 1,000 W Gtodpfx Adeqy Rq Iomet Stand height: 192 cm 2 ESYLUX HAST 1000 spotlights with stand and switching unit for lighting and heating workpieces and work spaces or other areas of application.

Condition: new, machine/vehicle number: DF0178, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz Gsdpsfxyh Uefx Admstt work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? :inklusiv ? :inklusiv ? :inklusiv ?

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Gedpowqx Axefx Admott Location: from stock 54634 Bitburg - available immediately -

Condition: used, Dalex spot welding machine type SL 16-1, 400 Volt, 16 kVA Gtedpoxz R Tbofx Admet

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Gtsdjtuwz Ispfx Admjt Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: used, functionality: fully functional, machine/vehicle number: 9420353 IMA, ElmaTech ELMA Vision CM – MF Transformer Handheld Welding Gun for Resistance Spot Welding Manufacturer: ElmaTech GmbH Model: ELMA Vision CM Serial Number: 9420353IMA Location: Morsbach, Germany Condition: Used, technically flawless Description The ElmaTech ELMA Vision CM is a high-performance medium-frequency transformer handheld welding gun (MF-gun) designed for professional resistance spot welding. It is particularly suited for industrial applications requiring high quality standards, such as: - Vehicle construction / bodywork - Metal and steel construction - Automated production lines - Robot-assisted welding cells - Repair and rework areas The modern 10 kHz MF technology ensures: - More stable weld spots - Reduced electrode wear - High energy efficiency - Precise current control Godpfx Adex Dcm Eomjtt Technical Data (as per nameplate) Output Welding current range: 0 – 15 kA Welding energy (Jₘₐₓ): 15 kAs Secondary voltage U₂₀: 12.5 V Input Rated voltage: 560 V Frequency: 10 kHz Duty cycle: 50 % ED Power consumption: 30 kVA Protection class: IP21 Additional Information Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Applications - Spot welding of steel, stainless steel, and galvanized sheets - Quality-relevant welding applications - Mobile or stationary MF welding systems - Compatible with ElmaTech MF converters (e.g. MIDISpot Vision QSVM)

Condition: used, Year of construction: 1997, Max. pressing force 100 t, sliding table 1,200 x 1,000 mm, press control system +++ Attention: Machine is part of an online auction! +++ Gtsdpfjxug E Tjx Admet

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm Gsdpfefxyi Dex Admett table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Gedpfx Adju Sb Dtjmett

Condition: like new (used), Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph Gsdpfx Aehpqykjdmott

Condition: excellent (used), pneumatically operated, water-cooled spot welding gun Manufacturer: DALEX, Type 3328-4 with 5/2 solenoid valve – double-stroke cylinder, long stroke 60 mm, pre-stroke 40 mm Working stroke with adjustable range 0–20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 16.5 kA Secondary open-circuit voltage: 4.7 V Electrode force: 280 daN Arm spacing: 140 mm Arm reach: 500 mm with cardan suspension and suspension bracket 10 m connection cable and control line Gjdpfx Adexywt Esmstt inclusive: auxiliary welding controller MPS 15036 with main switch according to VDE 0/100

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Gtedpfoit Rq Hjx Admjt Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, Year of construction: 2005, functionality: fully functional, PERFORMANCE AND DESIGN: Pressing Capacity: 26-100 T (adjustable) Maximum Return Force: 45 T Table Dimensions: 1,600 x 1,300 mm Maximum Table Load Capacity: 12,000 kg Distance – Ram to Lower Table (Max.): 1,700 mm Frame Type: 4-column Overall Dimensions approx. (W x D x H): 4,900 x 2,800 x 5,500 mm Total Weight approx.: 17,000 kg T-slots and drillings to DIN 650 – 22 mm HYDRAULIC UNIT: Hydraulic Pump (Brand: REXROTH): SYDFE2x/071R-PPA.. Motor Power: 15 kW Max. Operating Pressure: 200 bar Pressure Accuracy during Pressing Stroke: +/- 5 bar Oil Tank Volume: 475 L Hydraulic Oil Specification: HLP 36 ELECTRICAL SYSTEM ACCESSORIES ELECTRICAL CONNECTION: - Main Supply: 400V AC - Control Voltage: 24V DC - Frequency: 50 Hz - Hydraulic Main Motor Connection: 15 kW - Total Connected Load approx.: 21 kW FEATURES • 180° foldable ram plate up to 7.5 tons (tilted) • Ram ejector 5.6 tons, 160 mm stroke • Stroke extension by 300 mm • Increased speed DOCUMENTATION • Hydraulic diagram • Electrical diagram • Technical drawing • Data sheet Gsdpfx Adjxd Tv Domstt FUNCTIONS AND DESCRIPTIONS CONTROL OF THE PRESS: The press is operated via the operator panel. • Raise/lower the ram plate • Tilt the ram plate • Extend/retract the table • Operate the ejector • Set press force The control system is Siemens Simatic S7-634.

Condition: like new (used), Eillert C25 H Potato rumbler Gsdpjhpqqmjfx Admstt Serial: 4149308 Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm Gjdpjfhcc Sjfx Admett dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: as good as new (ex-display), Year of construction: 2015, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm Gjdpsffamqjfx Admott daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: new, machine/vehicle number: DF0177, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l Gedpfx Aefxyhisdmjtt :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: as good as new (ex-display), Year of construction: 2016, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec Gtjdpfohtm E Nsx Admst working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressure:110 t table length:1200 mm Gedjd Ap Ugjpfx Admjtt table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: used, Year of construction: 1998, Performance and Design Pressing Capacity: 26–100 t (adjustable) Return Force: 45 t Table: 1,600 × 1,300 mm Max. Table Load: 5,000 kg Distance Ram – Table (max.): 950 mm Frame Type: 4-column Overall Dimensions (W×D×H): approx. 3,400 × 4,200 × 3,700 mm Total Weight: approx. 8,500 kg T-slots/Bores: DIN 650, 22 mm Hydraulics Pump: Rexroth SYDFE11x71RN0030CAM Motor Power: 7.5 kW Max. Operating Pressure: 200 bar Press Stroke Pressure Accuracy: ± 5 bar Tank Volume: 215 l Hydraulic Oil: HLP 36 Gtodpfjxd Tiqox Admst Electrics Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Main Motor Connection: 7.5 kW Total Connected Load: approx. 10 kW Features 180° tiltable ram plate (up to 3 t) Ejector in table (3.5 t, 130 mm) Oil ports for core pull Digital measuring system Material feeding (injection molding) via ram plate possible Speed increase possible Documentation Hydraulic schematic Electrical schematic Technical drawing Data sheet (used spotting press, 100t press, Reis hydraulic press, 4-column press, toolmaking press, forming press, injection molding press, used machine, industrial machine, hydraulic press, tool testing press) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety guideline NR 12, which builds on these standards. Our key strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. We use components from leading European manufacturers for the hydraulics of our presses.

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm Gjdpodxrqxjfx Admott table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm Gedpfxeffamts Admjtt :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er