Hand hydraulic pump with cylinder

Tangyes 100 Tonnen

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Nodohwrgtjpfx Amnswg Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg Nodpfx Amohlz R Sonewg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Nodpfxodx D Tvs Amnjwg

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW Nedpfszif Ssx Amnowg space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg pressure power: 30 kN

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min 3 Phase Max head. 20m Njdpfxorqgauj Amnewg IP68

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Nodpeghtvasfx Amnowg Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: good (used), Technical details: Capacity: 3000 x 10 mm Further technical specifications to follow. Nwedpjyngctefx Amnsg Accessories: Various tools Condition: Overall in good and fully functional condition. The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm Nodpfx Aott Ecdsmnewg L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min Nwsdof Ep Dijpfx Amneg total power requirement 2 x 0,55 kW

Condition: used, Year of construction: 1994, total length: 6,300 mm, total width: 2,000 mm, total height: 1,800 mm, Empty weight: 24.000 kg Price: On request - Year: 1994 Nwjdpfx Amoxyklnensg - Documentation available: No - CE certificate present: No - Serial number: 10659 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Max. sheet thickness [mm]: 25 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 300 - Transport dimensions: 6300mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 24000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum