Edge banders SCM Olimpic K 560 HP T ER 2 2017

SCM Olimpic K 560 HP T ER 2

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot Prjdpfsyux Risx Akijc

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Pedpfjyuu Scjx Akierc Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Predpfx Ajcx Smbskioc Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm Pedpfsx U U Eksx Akisrc - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Prsdpfxjv S Uz Ie Akioc Width: 1900 mm Height: 1560mm

Condition: used, functionality: limited functionality, 1.Equalizer. - shaft width 260 mm - length of tabletops 1560 mm 2.Thicknessing machine - thickness of the workpiece 180mm 3.Drilling machine - max tool diameter 18 mm - drilling depth 80 mm - drilling width 140 mm - table top adjustable up/down front/back and sideways 4.Circular saw - NO SAW BLADE 5.Milling machine - Spindles 30 mm - Adjustable spindle Prsdpjqwg Efsfx Akijc CONDITION AND COMPLETENESS AS IN PICTURES

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW Predpomiik Tsfx Akijc universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. Prsdpfx Aeiidm Nskiec and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pjdpfx Asyy A Iqokierc Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR, Hot Air Prsdjx A Tgyspfx Akisc Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr