Used Postforming for sale (49)

Year of construction: 1988, condition: used, - working length max. (mm): 3100 - profile height max. (mm): 200 Isdpekx Hpasfx Ag Dea

Condition: like new (used), Year of construction: 2016, functionality: fully functional, SPECIFICATION • Steel construction • Rubber covered roller with spiral groove for guiding the sanding belt Pneumatic belt tensioning • Automatic belt oscillation • Belt centering device • Feed unit operated by pneumatic rollers controlled via an inverter Ijdpfsw D Dquex Ag Doa • Pneumatic cylinder with balanced adjustment for even pressure TECHNICAL DATA • Sanding belt motor: 5.5 kW • Feed unit motor: 0.25 kW • Minimum curve radius: 350 mm • Performance 300 pcs/hour • Machine dimensions: 850 x 1500 x 1700 (h) mm • Machine weight: 450 kg According to CE rules In compliance with CE safety rules

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Isdpfjxwt Nqox Ag Dea Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Iedpfx Agexugplo Dja Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Isdpfx Ajv N D E Rsg Dsa Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading Isdpswka Nyjfx Ag Dja - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display Isdpfx Agexuhpaj Dea pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: good (used), Bar sectioning machine model TRI 1300 with postforming engraver Quantity four clamps Complete with automatic loading S2 Machine performs finished cutting Iodsu S Rdtjpfx Ag Doa

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Iedow Dfnhspfx Ag Dea Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, Built-in features: * Saw blade projection 80 mm * Cutting length 3200 mm * Right-hand machine * Machine table in the cutting line with air cushion * Stepless pressure beam control * 6 clamps * Main saw motor power: 11 kW * Scoring saw motor power: 2.2 kW * Labelling package * Postforming * Saw carriage speed: 130 m/min Machine operation * Operating panel * CADMATIC 5 * Additional information * CAD link conversion program * Data transfer online + USB Documentation: * Selected languages: English, German, Croatian * Documentation on data carrier, printed documentation Iodpfsxv Srusx Ag Doa General information: * Machine length 3200 mm * Control: POWERCONTROL with POWERTOUCH system * CE mark * Commissioning date: November / December 2025

Condition: ready for operation (used), Technical characteristics Cast-iron frame Useful width : 630 mm Useful height : 300 mm 7.5 kW motor Electric up/down and fine adjustment Digital display 1200mm long table with backlash adjustment / 4 columns Sectioned drive at infeed 2 rubber rollers at output Variable feed 6 to 20 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 8 Kw Motor: 10 CV Overall dimensions Ijdjtxk Syepfx Ag Dea

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Iedpskwhapsfx Ag Dsa Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2012, Rotary sander with rollers for postformed workpieces with a vacuum system to hold the workpiece on the feed belt Machine dimensions: 1715 x 3235 x 2000 mm Working width: 1400 mm Working height: 100 mm Belt feed speed: 2-13 m/min Abrasive shaft rotation speed: 300-1200 rpm Support shaft rotation speed: 3-16 rpm Abrasive shaft length: 540 mm No. 8 (4+4) rotating abrasive shafts Abrasive tool diameter: 300 mm No. 336 total abrasive discs Main motor power: 5.5 kW Rotation motor power: 1.5 kW Height adjustment motor power: 0.3 kW Belt feed motor power: 0.3 kW 2.2 Vacuum fan motor power: 2.2 kW TECHNICAL DETAILS TO BE VERIFIED Iedpfx Aew E H R Teg Dsa

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) Iedenzhxqepfx Ag Dsa C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, SECOND-HAND BRUSHING MACHINE COMEC Isdpfx Aewrq Ehjg Dea

Condition: ready for operation (used), Technical characteristics En cours de vérification One-piece cast-iron frame Useful width : 505 mm Useful height : 3 to 300 mm Max. infeed : 10 mm Iedpfjty Hmcsx Ag Dja Shaft Ø 120 mm, 4 irons Rotation 5000 RPM 7.5 kW motor Electric up/down and manual fine adjustment Feeding speeds : 8, 11, 15 and 19 m/min 1200 mm table length Roller drive Ø 180 mm suction output Power and Motors Voltage: 380 V Pluging: Three-phased Power: 7,5 Kw Motor: 10 CV Overall dimensions Lenght: 1200 mm Width: 1050 mm Height: 1170 mm Weight: 900 Kg

Condition: used, Year of construction: 1996, machine/vehicle number: 11, SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC250 - With feeding units - Working size min/max 30/150mm Iodpfxowrqr Ie Ag Doa - Min. bending radius 250mm - Year 1996 (CE) - S/N 11

Condition: ready for operation (used), Technical characteristics One-piece cast-iron frame Useful width: 630 mm Usable height: 3.5 to 300 mm Minimum machining length: 260 mm 7 kW (9.5 hp) motor 4-iron spindle Shaft diameter : 120 mm Electric lift/lower Digital height display Iedpfotzth Iox Ag Dja Cast-iron table : 640 x 1000 mm Supported by 4 columns Driven by steel and rubber rollers Feeding speeds : 5; 8; 12 and 16 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 11 Kw Motor: 9,5 CV Overall dimensions Weight: 785 Kg

Condition: ready for operation (used), Technical characteristics Usable width : 550 mm Asymmetrical table length : 2800 mm 4-iron shaft Ø 120 mm Cast-iron fence, length 1200 mm 4 kW motor Ø 120 mm suction port Heavy machine Ijdpeub Eufsfx Ag Dsa Power and Motors Voltage: 380 V Pluging: Three-phased Power: 4 Kw Motor: 5 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics Table width : 550 mm Asymmetrical table length : 2700 mm 4-iron shaft Ø 120 mm Cast-iron fence, tilting from 90° to 45°, length 1200 mm 4 kW motor Ø 120 mm suction port Heavy machine Power and Motors Voltage: 380 V Pluging: Three-phased Iedpfx Agjub Et Io Dja Power: 3 Kw Motor: 4 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics En cours de vérification Usable width : 410 mm Asymmetrical table length : 2500 mm 4 iron shaft Ø 120 mm Rotation speed : 5000 RPM Tiltable cast-iron fence, length 1100 mm, height 160 mm 4 kW (5.5 HP) motor Suction outlet Ø 150 mm One-piece cast-iron frame Power and Motors Voltage: 380 V Pluging: Three-phased Power: 4 Kw Motor: 5,5 CV Overall dimensions Lenght: 2500 mm Width: 780 mm Height: 1000 mm Isdpfx Ageub Et Uj Dea Weight: 750 Kg

Condition: ready for operation (used), Technical characteristics Cast-iron frame Useful width : 630 mm Useful height : 300 mm 7.5 kW motor Electric lift/lower and fine adjustment Digital height display 1200 mm table length (2000 mm with extension) Backlash compensation / 4 columns Sectioned drive at infeed 2 rubber rollers at output Variable feed rate 6 to 20 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 10 Kw Motor: 10 CV Overall dimensions Ijdpetxk Stefx Ag Doa

Condition: ready for operation (used), Technical characteristics One-piece cast-iron frame Useful width : 630 mm Useful height : 300 mm 5.5 kW (7.5 hp) motor Isdjtxk Sajpfx Ag Dja 4-iron TERSA diameter shaft Shaft diameter : 125 mm Electric raising/lowering and fine adjustment Digital height display Cast-iron table : 630 x 1200 mm Backlash compensation / 4 columns Notched steel roller drive at infeed 2 output rollers (1 steel smooth + 1 rubber) Variable feed 6 to 20 m/min Power and Motors Voltage: 380 V Pluging: Three-phased Power: 10 Kw Motor: 7,5 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics Cast-iron frame Useful width : 630 mm Useful height : 230 mm 4 iron shafts, 120 mm diameter 5.5 kW motor Manual raising/lowering and fine adjustment 800 mm table length (1500 mm with extension) Sectioned drive at infeed (toothed roller) 2 smooth rollers at output Solid machine, ideal for wood frame work Ijdpetxk Smefx Ag Dja Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics Table width : 550 mm Asymmetrical table length : 2700 mm 4-iron shaft Ø 120 mm Cast-iron fence, tilting from 90° to 45°, length 1200 mm 4 kW motor Ø 120 mm suction port Ijdpfx Aeub Eulsg Dea Heavy machine Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 5,5 CV Overall dimensions