Used Plum Stoner for sale (212)

Condition: used, Plummer block housings, plummer block housings, bearing blocks for shredders, shredders, water mills, hackers, cutting mills, granulators, cutting granulators -Quantity: 1 piece plummer block housing made of steel for heavy use -Type: bearing block inner diameter: 320 mm -Axis / center of housing: 190 mm Iodpedaa Huofx Aacjih -with: shaft sealing washers -Number: 1x bearing block available -suitable for: stock code 22236/22330/23064/23138/23236, not included in delivery -suitable for: bearing code 22236K / 22330K / 23064K / 23138K / 23236K, not included in deliver -Dimensions: 560/190 / H395 mm -Weight: 228 kg

Condition: used, Plummer Block Housings, Plummer Block Housings -Number: 4 pieces bearing block with bearing -Type bearing block: NTN 320 -Type of bearing: UC320 -with shaft seal Ijdpfjb A H Rzex Aacoih -Bearing: Ø 100 mm -Number: 4x bearings available -Price: per piece -Dimensions package: 550/340/H240 mm -Weight: 43 kg

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm Iedpfx Aehv S Ezeaceih -Total weight: 9.8 kg

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank -Unit: unfortunately without type designation -Hydraulic tank: Tank capacity approx. 7 l, with return pressure indicator -Pressure: bars Ijdpfjhvfy Ujx Aacjih -Flow rate: l/min -Individual components: see photos -Dimensions: 350/240/H570 mm -Total weight: 15.1 kg

Condition: used, Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -FAG: Plummer block housing type SNV 140 Iijdpfx Aaofk Ad Socoh -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Jungheinrich electric forklift -2x drives -Filter Control valve -Hydraulic tank: 930/400 / H360 mm -Dimensions: 1000/400 / H800 mm Iijdjb Uht Aopfx Aacsh -Weight: 288 kg

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm Iedpfevmtdkox Aacsih work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21319 Specifications: 2020 model Hydraulic rock splitter 600 bar 23.5 kg Hydraulic generator Weight for hammer Ready for delivery Description: We have a 2020 sp400 Hydraulic splitter w/ Air hammer, plumb bob and hydraulic generator for sale. Everything works as it should and has been used little. Ready for delivery Iiodpfexcfncsx Aaceh Own weight: 23

Condition: used, bed width 220 mm daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m Iiedpoxn Tw Aefx Aacoh weight ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm Iodpjwqr Ibefx Aacsih column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1994, bore capacity in steel (diameter) 32 mm throat 290 mm bore stroke 150 mm Iodpfxown T Aho Aacjih spindle turning speed - stepless 80 - 1170 U/min spindle taper MT 3 table-size 480 x 400 mm total power requirement 0,9 / 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,6 x 0,6 x 2,1 m A pillar drill press from a school that has seen little use, featuring infinitely variable speed control, a 2-speed motor, automatic spindle feed, reverse and reverse rotation, a rack-and-pinion table with adjustable table height, and a coolant pump. The year of manufacture is estimated! Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Iisdsvn Al Hjpfx Aacjh Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with Iodpfx Aovdfmxsacsih all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), tool clamping area 20 - 70 mm weight 5 - 8 kg Price is per piece for the smallest, if you are interested please contact us. Machine dealer with own stock of 1600 m². Iisdpjtvmzyofx Aacsh

Condition: used, workpiece length 3000 mm roll diameter 50 mm work piece width 300 mm Roll lenght 210 mm Height 800 bis 1100 mm No. - Rolls 12 dimensions of the machine ca. 3 x 0,33 x 0,55 m Isdpfxexmkzvo Aacsih Unused discharge conveyor with foldable stop and prepared for mounting a measuring scale = 1150,--. Unused feeding roller conveyor with two feet Photo 5-7, price 850, - (2 pieces available). Machine dealer with own stock of 2500 m².

Condition: used, diameter 85 mm tool adaptor SK 50 bore of diameter max. 130 mm adjustment of the slide 40 mm tool tapers in the slides 20 mm weight ca. 3 kg Machine dealer with own stock of 1600 m². Iodpfov Dx Aajx Aacsih

Condition: used, thickness of jaw 160 mm max. clamping width 240 mm ca. tension force ca. 4,5 to Isdpfx Ajv Dxyxoacjih high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Machine dealer with own stock of 1600 m².

Condition: used, plate thickness 4 mm Cutting thickness max. At (60 kg / mm²) 3 mm Iiodpou I Et Rsfx Aacsh blade length 90 mm weight ca. 30 kg dimensions of the machine ca. 0,45 x 0,30 x 0,2 m Notching unit for installation under a hydraulic or eccentric press. The cutting thicknesses are estimated to be low. Machine dealer with own stock of 1600 m².

Condition: excellent (used), quality grade 1 Iiedpfxju Dpayo Aacsh

Year of construction: 2020, condition: excellent (used), Measuring range 1000 mm measuring system resolution capability 0,01 /0,0005 mm repeatability 10 um adjustment speed 1,5 m/sec weight - pallet system ca. 1,8 kg Iodeu Dpamopfx Aaceih Digital workshop caliper in lightweight construction with wooden box. Large digital display. With measuring tips and prism guide. Easy, precise running thanks to prism guidance. Aluminum rail and slider. 50% weight advantage. The caliper was hardly used and is in new condition.

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m². Iijdetq I Rqepfx Aacsh

Condition: used, Year of construction: 1964, pressure 10 t throat 235 mm stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min Iiodpfxsvgnqfj Aaceh stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

Condition: used, x-travel 1500 mm y-travel 1000 mm z-travel 900 mm weight 1,2 kg dimensions 260 x 168 x 80 mm Used 3-axis digital display from Mitutoyo with three scales. The digital one Measuring device was dismantled because the machine - a table boring machine - was disposed of. Display area. 0.005, 0.001mm. Hole circle display, distance processing, Iijdpfx Aajvdfmrscjh Conversion to lathe operation possible, programmable parameters.

Condition: used, brinell hardness 250 kg rockwell hardness 150 kg throat 125 mm workpiece height max. 200 mm weight of the machine ca. 70 kg dimensions of the machine ca. 400 x 200 x 700 mm Test load: 62,5 / 100 / 150 / 187,5 / 250 nell Dto. 100 und 150 kg Rockwell. Device untested because we are not familiar with it. Iedpfxjuvd Hds Aacsih Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1976, centre height 76 mm centre distance 190 mm spindle bore 21 mm taper MK 3 Iijdpfx Aou Twclsacoh weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm